| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1411675680.13320.201.camel@snotra.buserror.net>
Date: Thu, 25 Sep 2014 15:08:00 -0500
From: Scott Wood <scottwood@...escale.com>
To: Lu Jingchang-B35083 <jingchang.lu@...escale.com>
CC: "mturquette@...aro.org" <mturquette@...aro.org>,
"linuxppc-dev@...ts.ozlabs.org" <linuxppc-dev@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCHv4] clk: ppc-corenet: rename to ppc-qoriq and add
CLK_OF_DECLARE support
Well, like I said, I'd rather see the CLK_OF_DECLARE stuff be made to
work on PPC rather than have the driver carry around two binding
methods.
-Scott
On Thu, 2014-09-25 at 04:47 -0500, Lu Jingchang-B35083 wrote:
> Hi, Scott and Mike,
>
> Could you please help review this patch and give an ACK if ok. Thanks.
>
> Best Regards,
> Jingchang
>
> >-----Original Message-----
> >From: Jingchang Lu [mailto:jingchang.lu@...escale.com]
> >Sent: Tuesday, September 23, 2014 2:47 PM
> >To: mturquette@...aro.org
> >Cc: Wood Scott-B07421; linuxppc-dev@...ts.ozlabs.org; linux-
> >kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; Lu
> >Jingchang-B35083
> >Subject: [PATCHv4] clk: ppc-corenet: rename to ppc-qoriq and add
> >CLK_OF_DECLARE support
> >
> >The IP is shared by PPC and ARM, this renames it to qoriq for better
> >represention, and this also adds the CLK_OF_DECLARE support for being
> >initialized by of_clk_init() on ARM.
> >
> >Signed-off-by: Jingchang Lu <jingchang.lu@...escale.com>
> >---
> >changes in v4:
> > remove "corenet" literals omitted in v3 remove.
> >
> >changes in v3:
> > generate the patch with -M -C option
> >
> >changes in v2:
> > rename the driver name to ppc-qoriq.c for shared on PPC and ARM.
> >
> > drivers/clk/Kconfig | 9 +++++----
> > drivers/clk/Makefile | 2 +-
> > drivers/clk/{clk-ppc-corenet.c => clk-qoriq.c} | 27 +++++++++++++++------
> >-----
> > 3 files changed, 22 insertions(+), 16 deletions(-) rename
> >drivers/clk/{clk-ppc-corenet.c => clk-qoriq.c} (89%)
> >
> >diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index
> >85131ae..f5f76cb 100644
> >--- a/drivers/clk/Kconfig
> >+++ b/drivers/clk/Kconfig
> >@@ -92,12 +92,13 @@ config COMMON_CLK_AXI_CLKGEN
> > Support for the Analog Devices axi-clkgen pcore clock generator
> >for Xilinx
> > FPGAs. It is commonly used in Analog Devices' reference designs.
> >
> >-config CLK_PPC_CORENET
> >- bool "Clock driver for PowerPC corenet platforms"
> >- depends on PPC_E500MC && OF
> >+config CLK_QORIQ
> >+ bool "Clock driver for PowerPC corenet and compatible ARM-based
> >platforms"
> >+ depends on (PPC_E500MC || ARM) && OF
> > ---help---
> > This adds the clock driver support for Freescale PowerPC corenet
> >- platforms using common clock framework.
> >+ platforms and compatible Freescale ARM based platforms using
> >common
> >+ clock framework.
> >
> > config COMMON_CLK_XGENE
> > bool "Clock driver for APM XGene SoC"
> >diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> >27c542b..20f42e9 100644
> >--- a/drivers/clk/Makefile
> >+++ b/drivers/clk/Makefile
> >@@ -29,7 +29,7 @@ obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o
> > obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
> > obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
> > obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
> >-obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o
> >+obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
> > obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
> > obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
> > obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
> >diff --git a/drivers/clk/clk-ppc-corenet.c b/drivers/clk/clk-qoriq.c
> >similarity index 89% rename from drivers/clk/clk-ppc-corenet.c rename to
> >drivers/clk/clk-qoriq.c index 8e58edf..cba8abe 100644
> >--- a/drivers/clk/clk-ppc-corenet.c
> >+++ b/drivers/clk/clk-qoriq.c
> >@@ -155,7 +155,7 @@ static void __init core_pll_init(struct device_node
> >*np)
> >
> > base = of_iomap(np, 0);
> > if (!base) {
> >- pr_err("clk-ppc: iomap error\n");
> >+ pr_err("clk-qoriq: iomap error\n");
> > return;
> > }
> >
> >@@ -252,7 +252,7 @@ static void __init sysclk_init(struct device_node
> >*node)
> > u32 rate;
> >
> > if (!np) {
> >- pr_err("ppc-clk: could not get parent node\n");
> >+ pr_err("qoriq-clk: could not get parent node\n");
> > return;
> > }
> >
> >@@ -278,30 +278,35 @@ static const struct of_device_id clk_match[]
> >__initconst = {
> > {}
> > };
> >
> >-static int __init ppc_corenet_clk_probe(struct platform_device *pdev)
> >+static int __init qoriq_clk_probe(struct platform_device *pdev)
> > {
> > of_clk_init(clk_match);
> >
> > return 0;
> > }
> >
> >-static const struct of_device_id ppc_clk_ids[] __initconst = {
> >+static const struct of_device_id qoriq_clk_ids[] __initconst = {
> > { .compatible = "fsl,qoriq-clockgen-1.0", },
> > { .compatible = "fsl,qoriq-clockgen-2.0", },
> > {}
> > };
> >
> >-static struct platform_driver ppc_corenet_clk_driver __initdata = {
> >+static struct platform_driver qoriq_clk_driver __initdata = {
> > .driver = {
> >- .name = "ppc_corenet_clock",
> >+ .name = "qoriq_clock",
> > .owner = THIS_MODULE,
> >- .of_match_table = ppc_clk_ids,
> >+ .of_match_table = qoriq_clk_ids,
> > },
> >- .probe = ppc_corenet_clk_probe,
> >+ .probe = qoriq_clk_probe,
> > };
> >
> >-static int __init ppc_corenet_clk_init(void)
> >+static int __init qoriq_clk_init(void)
> > {
> >- return platform_driver_register(&ppc_corenet_clk_driver);
> >+ return platform_driver_register(&qoriq_clk_driver);
> > }
> >-subsys_initcall(ppc_corenet_clk_init);
> >+subsys_initcall(qoriq_clk_init);
> >+
> >+CLK_OF_DECLARE(qoriq_core_pll_v1, "fsl,qoriq-core-pll-1.0",
> >+core_pll_init); CLK_OF_DECLARE(qoriq_core_pll_v2,
> >+"fsl,qoriq-core-pll-2.0", core_pll_init);
> >+CLK_OF_DECLARE(qoriq_core_mux_v1, "fsl,qoriq-core-mux-1.0",
> >+core_mux_init); CLK_OF_DECLARE(qoriq_core_mux_v2,
> >+"fsl,qoriq-core-mux-2.0", core_mux_init);
> >--
> >1.8.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists