| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1411740145-30626-18-git-send-email-jiang.liu@linux.intel.com>
Date: Fri, 26 Sep 2014 22:02:18 +0800
From: Jiang Liu <jiang.liu@...ux.intel.com>
To: Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Randy Dunlap <rdunlap@...radead.org>,
Yinghai Lu <yinghai@...nel.org>,
Borislav Petkov <bp@...en8.de>,
Grant Likely <grant.likely@...aro.org>,
Marc Zyngier <marc.zyngier@....com>
Cc: Jiang Liu <jiang.liu@...ux.intel.com>,
Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Tony Luck <tony.luck@...el.com>,
Joerg Roedel <joro@...tes.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
x86@...nel.org, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, linux-acpi@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [RFT v2 17/24] iommu/vt-d: Clean up unused MSI related code
Now MSI interrupt has been converted to new hierarchy irqdomain
interfaces, so kill legacy MSI related code.
Signed-off-by: Jiang Liu <jiang.liu@...ux.intel.com>
---
drivers/iommu/intel_irq_remapping.c | 144 -----------------------------------
1 file changed, 144 deletions(-)
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 166a73a3b551..8be4f924cb7c 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -146,44 +146,6 @@ static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
return qi_submit_sync(&desc, iommu);
}
-static int map_irq_to_irte_handle(int irq, u16 *sub_handle)
-{
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
- unsigned long flags;
- int index;
-
- if (!irq_iommu)
- return -1;
-
- raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
- *sub_handle = irq_iommu->sub_handle;
- index = irq_iommu->irte_index;
- raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
- return index;
-}
-
-static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
-{
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
- struct irq_cfg *cfg = irq_cfg(irq);
- unsigned long flags;
-
- if (!irq_iommu)
- return -1;
-
- raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
-
- cfg->remapped = 1;
- irq_iommu->iommu = iommu;
- irq_iommu->irte_index = index;
- irq_iommu->sub_handle = subhandle;
- irq_iommu->irte_mask = 0;
-
- raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
-
- return 0;
-}
-
static int modify_irte(struct irq_2_iommu *irq_iommu,
struct irte *irte_modified)
{
@@ -1072,108 +1034,6 @@ intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
return 0;
}
-static void intel_compose_msi_msg(struct pci_dev *pdev,
- unsigned int irq, unsigned int dest,
- struct msi_msg *msg, u8 hpet_id)
-{
- struct irq_cfg *cfg;
- struct irte irte;
- u16 sub_handle = 0;
- int ir_index;
-
- cfg = irq_cfg(irq);
-
- ir_index = map_irq_to_irte_handle(irq, &sub_handle);
- BUG_ON(ir_index == -1);
-
- prepare_irte(&irte, cfg->vector, dest);
-
- /* Set source-id of interrupt request */
- if (pdev)
- set_msi_sid(&irte, pdev);
- else
- set_hpet_sid(&irte, hpet_id);
-
- modify_irte(irq_2_iommu(irq), &irte);
-
- msg->address_hi = MSI_ADDR_BASE_HI;
- msg->data = sub_handle;
- msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
- MSI_ADDR_IR_SHV |
- MSI_ADDR_IR_INDEX1(ir_index) |
- MSI_ADDR_IR_INDEX2(ir_index);
-}
-
-/*
- * Map the PCI dev to the corresponding remapping hardware unit
- * and allocate 'nvec' consecutive interrupt-remapping table entries
- * in it.
- */
-static int intel_msi_alloc_irq(struct pci_dev *dev, int irq, int nvec)
-{
- struct intel_iommu *iommu;
- int index;
-
- down_read(&dmar_global_lock);
- iommu = map_dev_to_ir(dev);
- if (!iommu) {
- printk(KERN_ERR
- "Unable to map PCI %s to iommu\n", pci_name(dev));
- index = -ENOENT;
- } else {
- index = alloc_irte(iommu, irq, irq_2_iommu(irq), nvec);
- if (index < 0) {
- printk(KERN_ERR
- "Unable to allocate %d IRTE for PCI %s\n",
- nvec, pci_name(dev));
- index = -ENOSPC;
- }
- }
- up_read(&dmar_global_lock);
-
- return index;
-}
-
-static int intel_msi_setup_irq(struct pci_dev *pdev, unsigned int irq,
- int index, int sub_handle)
-{
- struct intel_iommu *iommu;
- int ret = -ENOENT;
-
- down_read(&dmar_global_lock);
- iommu = map_dev_to_ir(pdev);
- if (iommu) {
- /*
- * setup the mapping between the irq and the IRTE
- * base index, the sub_handle pointing to the
- * appropriate interrupt remap table entry.
- */
- set_irte_irq(irq, iommu, index, sub_handle);
- ret = 0;
- }
- up_read(&dmar_global_lock);
-
- return ret;
-}
-
-static int intel_setup_hpet_msi(unsigned int irq, unsigned int id)
-{
- int ret = -1;
- struct intel_iommu *iommu;
- int index;
-
- down_read(&dmar_global_lock);
- iommu = map_hpet_to_ir(id);
- if (iommu) {
- index = alloc_irte(iommu, irq, irq_2_iommu(irq), 1);
- if (index >= 0)
- ret = 0;
- }
- up_read(&dmar_global_lock);
-
- return ret;
-}
-
static struct irq_domain *intel_get_ir_irq_domain(struct irq_alloc_info *info)
{
struct intel_iommu *iommu = NULL;
@@ -1250,10 +1110,6 @@ struct irq_remap_ops intel_irq_remap_ops = {
.setup_ioapic_entry = intel_setup_ioapic_entry,
.set_affinity = intel_ioapic_set_affinity,
.free_irq = free_irte,
- .compose_msi_msg = intel_compose_msi_msg,
- .msi_alloc_irq = intel_msi_alloc_irq,
- .msi_setup_irq = intel_msi_setup_irq,
- .setup_hpet_msi = intel_setup_hpet_msi,
.get_ir_irq_domain = intel_get_ir_irq_domain,
.get_irq_domain = intel_get_irq_domain,
.get_ioapic_entry = intel_get_ioapic_entry,
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists