| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1411971854-14853-1-git-send-email-gautam.vivek@samsung.com>
Date: Mon, 29 Sep 2014 11:54:14 +0530
From: Vivek Gautam <gautam.vivek@...sung.com>
To: linux-usb@...r.kernel.org, gregkh@...uxfoundation.org
Cc: linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
stern@...land.harvard.edu, kgene.kim@...sung.com,
jg1.han@...sung.com, Vivek Gautam <gautam.vivek@...sung.com>
Subject: [PATCH v5 RESEND 1/2] usb: host: ehci-exynos: Remove unnecessary usb-phy support
Now that we have completely moved from older USB-PHY drivers
to newer GENERIC-PHY drivers for PHYs available with USB controllers
on Exynos series of SoCs, we can remove the support for the same
in our host drivers too.
We also defer the probe for our host in case we end up getting
EPROBE_DEFER error when getting PHYs.
Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com>
Acked-by: Jingoo Han <jg1.han@...sung.com>
Acked-by: Alan Stern <stern@...land.harvard.edu>
---
Changes since v4:
- returning 'ret' instead of PTR_ERR(phy), since ret is nothing but that only.
Changes since v3:
- Addressed review comments by Alan:
-- Skipped renaming 'phy_number' variable,
-- resorted to just adding minimal change required for phy assignment.
-- updated patch description to mention EPROBE_DEFER support.
drivers/usb/host/ehci-exynos.c | 74 +++++++++++-----------------------------
1 file changed, 20 insertions(+), 54 deletions(-)
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 2eed9a4..7189f2e 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -21,11 +21,8 @@
#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/samsung_usb_phy.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
-#include <linux/usb/otg.h>
#include "ehci.h"
@@ -47,9 +44,7 @@ static struct hc_driver __read_mostly exynos_ehci_hc_driver;
struct exynos_ehci_hcd {
struct clk *clk;
- struct usb_phy *phy;
- struct usb_otg *otg;
- struct phy *phy_g[PHY_NUMBER];
+ struct phy *phy[PHY_NUMBER];
};
#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
@@ -60,8 +55,9 @@ static int exynos_ehci_get_phy(struct device *dev,
struct device_node *child;
struct phy *phy;
int phy_number;
- int ret = 0;
+ int ret;
+ /* Get PHYs for the controller */
for_each_available_child_of_node(dev->of_node, child) {
ret = of_property_read_u32(child, "reg", &phy_number);
if (ret) {
@@ -77,31 +73,21 @@ static int exynos_ehci_get_phy(struct device *dev,
}
phy = devm_of_phy_get(dev, child, NULL);
+ exynos_ehci->phy[phy_number] = phy;
of_node_put(child);
- if (IS_ERR(phy))
- /* Lets fallback to older USB-PHYs */
- goto usb_phy_old;
- exynos_ehci->phy_g[phy_number] = phy;
- /* Make the older PHYs unavailable */
- exynos_ehci->phy = ERR_PTR(-ENXIO);
- }
-
- return 0;
-
-usb_phy_old:
- exynos_ehci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
- if (IS_ERR(exynos_ehci->phy)) {
- ret = PTR_ERR(exynos_ehci->phy);
- if (ret != -ENXIO && ret != -ENODEV) {
- dev_err(dev, "no usb2 phy configured\n");
- return ret;
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else if (ret != -ENOSYS && ret != -ENODEV) {
+ dev_err(dev,
+ "Error retrieving usb2 phy: %d\n", ret);
+ return ret;
+ }
}
- dev_dbg(dev, "Failed to get usb2 phy\n");
- } else {
- exynos_ehci->otg = exynos_ehci->phy->otg;
}
- return ret;
+ return 0;
}
static int exynos_ehci_phy_enable(struct device *dev)
@@ -111,16 +97,13 @@ static int exynos_ehci_phy_enable(struct device *dev)
int i;
int ret = 0;
- if (!IS_ERR(exynos_ehci->phy))
- return usb_phy_init(exynos_ehci->phy);
-
for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
- if (!IS_ERR(exynos_ehci->phy_g[i]))
- ret = phy_power_on(exynos_ehci->phy_g[i]);
+ if (!IS_ERR(exynos_ehci->phy[i]))
+ ret = phy_power_on(exynos_ehci->phy[i]);
if (ret)
for (i--; i >= 0; i--)
- if (!IS_ERR(exynos_ehci->phy_g[i]))
- phy_power_off(exynos_ehci->phy_g[i]);
+ if (!IS_ERR(exynos_ehci->phy[i]))
+ phy_power_off(exynos_ehci->phy[i]);
return ret;
}
@@ -131,14 +114,9 @@ static void exynos_ehci_phy_disable(struct device *dev)
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
int i;
- if (!IS_ERR(exynos_ehci->phy)) {
- usb_phy_shutdown(exynos_ehci->phy);
- return;
- }
-
for (i = 0; i < PHY_NUMBER; i++)
- if (!IS_ERR(exynos_ehci->phy_g[i]))
- phy_power_off(exynos_ehci->phy_g[i]);
+ if (!IS_ERR(exynos_ehci->phy[i]))
+ phy_power_off(exynos_ehci->phy[i]);
}
static void exynos_setup_vbus_gpio(struct device *dev)
@@ -231,9 +209,6 @@ skip_phy:
goto fail_io;
}
- if (exynos_ehci->otg)
- exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
-
err = exynos_ehci_phy_enable(&pdev->dev);
if (err) {
dev_err(&pdev->dev, "Failed to enable USB phy\n");
@@ -273,9 +248,6 @@ static int exynos_ehci_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
- if (exynos_ehci->otg)
- exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
-
exynos_ehci_phy_disable(&pdev->dev);
clk_disable_unprepare(exynos_ehci->clk);
@@ -298,9 +270,6 @@ static int exynos_ehci_suspend(struct device *dev)
if (rc)
return rc;
- if (exynos_ehci->otg)
- exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
-
exynos_ehci_phy_disable(dev);
clk_disable_unprepare(exynos_ehci->clk);
@@ -316,9 +285,6 @@ static int exynos_ehci_resume(struct device *dev)
clk_prepare_enable(exynos_ehci->clk);
- if (exynos_ehci->otg)
- exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
-
ret = exynos_ehci_phy_enable(dev);
if (ret) {
dev_err(dev, "Failed to enable USB phy\n");
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists