| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <000d01cfdc63$99576bb0$cc064310$@samsung.com>
Date: Tue, 30 Sep 2014 09:33:38 +0530
From: Pankaj Dubey <pankaj.dubey@...sung.com>
To: 'Heiko Stübner' <heiko@...ech.de>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, arnd@...db.de,
b29396@...escale.com, lee.jones@...aro.org,
boris.brezillon@...e-electrons.com, tomasz.figa@...il.com,
linux@....linux.org.uk, vikas.sajjan@...sung.com,
naushad@...sung.com, thomas.ab@...sung.com, kgene.kim@...sung.com,
Li.Xiubo@...escale.com, geert+renesas@...der.be,
swarren@...dia.com, linux-rockchip@...ts.infradead.org
Subject: RE: [PATCH v6] mfd: syscon: Decouple syscon interface from platform
devices
Hi,
On Monday, September 29, 2014 9:38 PM, Heiko Stübner wrote,
> Am Montag, 29. September 2014, 14:17:38 schrieb Pankaj Dubey:
> > Currently a syscon entity can be only registered directly through a
> > platform device that binds to a dedicated syscon driver. However in
> > certain use cases it is desirable to make a device used with another
> > driver a syscon interface provider.
> >
> > For example, certain SoCs (e.g. Exynos) contain system controller
> > blocks which perform various functions such as power domain control,
> > CPU power management, low power mode control, but in addition contain
> > certain IP integration glue, such as various signal masks, coprocessor
> > power control, etc. In such case, there is a need to have a dedicated
> > driver for such system controller but also share registers with other
> > drivers. The latter is where the syscon interface is helpful.
> >
> > In case of DT based platforms, this patch decouples syscon object from
> > syscon platform driver, and allows to create syscon objects first time
> > when it is required by calling of syscon_regmap_lookup_by APIs and
> > keep a list of such syscon objects along with syscon provider
> > device_nodes and regmap handles.
> >
> > For non-DT based platforms, this patch keeps syscon platform driver
> > structure where is can be probed and such non-DT based drivers can use
> > syscon_regmap_lookup_by_pdev API and get access to regmap handles.
> > Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based,
> > we can completely remove platform driver of syscon, and keep only
> > helper functions to get regmap handles.
> >
> > Suggested-by: Arnd Bergmann <arnd@...db.de>
> > Suggested-by: Tomasz Figa <tomasz.figa@...il.com>
> > Tested-by: Vivek Gautam <gautam.vivek@...sung.com>
> > Tested-by: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
> > Signed-off-by: Pankaj Dubey <pankaj.dubey@...sung.com>
> > ---
>
> On Rockchip boards during core clock init (aka before timers)
> Tested-by: Heiko Stuebner <heiko@...ech.de>
>
Thanks for testing.
> Except one issue described inline below
> Reviewed-by: Heiko Stuebner <heiko@...ech.de>
>
>
> And I'm really looking forward to having this in the kernel :-)
>
> Thanks for working on this
> Heiko
>
>
[snip]
> >
> > drivers/mfd/syscon.c | 106
> > +++++++++++++++++++++++++++++++++++++++----------- 1 file
> changed, 84
> > insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index
> > ca15878..00a8410 100644
> > --- a/drivers/mfd/syscon.c
> > +++ b/drivers/mfd/syscon.c
> > @@ -15,6 +15,7 @@
> > #include <linux/err.h>
> > #include <linux/io.h>
> > #include <linux/module.h>
> > +#include <linux/list.h>
> > #include <linux/of.h>
> > #include <linux/of_address.h>
> > #include <linux/of_platform.h>
> > @@ -22,31 +23,104 @@
> > #include <linux/platform_device.h>
> > #include <linux/regmap.h>
> > #include <linux/mfd/syscon.h>
> > +#include <linux/slab.h>
> >
> > static struct platform_driver syscon_driver;
> >
> > +static DEFINE_SPINLOCK(syscon_list_slock);
> > +static LIST_HEAD(syscon_list);
> > +
> > struct syscon {
> > + struct device_node *np;
> > struct regmap *regmap;
> > + struct list_head list;
> > +};
> > +
> > +static struct regmap_config syscon_regmap_config = {
> > + .reg_bits = 32,
> > + .val_bits = 32,
> > + .reg_stride = 4,
> > };
> >
> > -static int syscon_match_node(struct device *dev, void *data)
> > +static struct syscon *of_syscon_register(struct device_node *np)
> > {
> > - struct device_node *dn = data;
> > + struct syscon *syscon;
> > + struct regmap *regmap;
> > + void __iomem *base;
> > + int ret;
> > + enum regmap_endian endian = REGMAP_ENDIAN_DEFAULT;
> > +
> > + if (!of_device_is_compatible(np, "syscon"))
> > + return ERR_PTR(-EINVAL);
> > +
> > + syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
> > + if (!syscon)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + base = of_iomap(np, 0);
> > + if (!base) {
> > + ret = -ENOMEM;
> > + goto err_map;
> > + }
> > +
> > + /* Parse the device's DT node for an endianness specification */
> > + if (of_property_read_bool(np, "big-endian"))
> > + endian = REGMAP_ENDIAN_BIG;
> > + else if (of_property_read_bool(np, "little-endian"))
> > + endian = REGMAP_ENDIAN_LITTLE;
> > +
> > + /* If the endianness was specified in DT, use that */
> > + if (endian != REGMAP_ENDIAN_DEFAULT)
> > + syscon_regmap_config.val_format_endian = endian;
> > +
> > + regmap = regmap_init_mmio(NULL, base, &syscon_regmap_config);
> > + if (IS_ERR(regmap)) {
> > + pr_err("regmap init failed\n");
> > + ret = PTR_ERR(regmap);
> > + goto err_regmap;
> > + }
> > +
> > + syscon->regmap = regmap;
> > + syscon->np = np;
> > +
> > + spin_lock(&syscon_list_slock);
> > + list_add_tail(&syscon->list, &syscon_list);
> > + spin_unlock(&syscon_list_slock);
> >
> > - return (dev->of_node == dn) ? 1 : 0;
> > + /* Change back endianness of syscon_regmap_config.
> > + * As this is static config in this file and in one system we may
> > + * have more than one syscon
> > + */
> > + syscon_regmap_config.val_format_endian =
> REGMAP_ENDIAN_DEFAULT;
>
> This should also be done in the error case. Currently when you goto
err_regmap the
> overridden value will be left in the struct.
>
Thanks, will handle this in error condition also.
> While on this, is there a concurrency issue here, aka of_syscon_register
could be
> called in parallel and what happens with
syscon_regmap_config.val_format_endian
> then?
I can think of two approaches to solve this.
1: Updating syscon_regmap_config, under spin_lock "syscon_list_slock".
2: Creation of local copy of syscon_regmap_config in "of_syscon_register"
and using
it. In this case changing back of endianness in syscon_regmap_config, will
not be needed
and code will be a bit cleaner.
I would prefer second one, what is your opinion?
Thanks,
Pankaj Dubey
>
>
> > +
> > + return syscon;
> > +
> > +err_regmap:
> > + iounmap(base);
> > +err_map:
> > + kfree(syscon);
> > + return ERR_PTR(ret);
> > }
> >
> > struct regmap *syscon_node_to_regmap(struct device_node *np) {
> > - struct syscon *syscon;
> > - struct device *dev;
> > + struct syscon *entry, *syscon = NULL;
> >
> > - dev = driver_find_device(&syscon_driver.driver, NULL, np,
> > - syscon_match_node);
> > - if (!dev)
> > - return ERR_PTR(-EPROBE_DEFER);
> > + spin_lock(&syscon_list_slock);
> >
> > - syscon = dev_get_drvdata(dev);
> > + list_for_each_entry(entry, &syscon_list, list)
> > + if (entry->np == np) {
> > + syscon = entry;
> > + break;
> > + }
> > +
> > + spin_unlock(&syscon_list_slock);
> > +
> > + if (!syscon)
> > + syscon = of_syscon_register(np);
> > +
> > + if (IS_ERR(syscon))
> > + return ERR_CAST(syscon);
> >
> > return syscon->regmap;
> > }
> > @@ -110,17 +184,6 @@ struct regmap
> > *syscon_regmap_lookup_by_phandle(struct
> > device_node *np, }
> > EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle);
> >
> > -static const struct of_device_id of_syscon_match[] = {
> > - { .compatible = "syscon", },
> > - { },
> > -};
> > -
> > -static struct regmap_config syscon_regmap_config = {
> > - .reg_bits = 32,
> > - .val_bits = 32,
> > - .reg_stride = 4,
> > -};
> > -
> > static int syscon_probe(struct platform_device *pdev) {
> > struct device *dev = &pdev->dev;
> > @@ -167,7 +230,6 @@ static struct platform_driver syscon_driver = {
> > .driver = {
> > .name = "syscon",
> > .owner = THIS_MODULE,
> > - .of_match_table = of_syscon_match,
> > },
> > .probe = syscon_probe,
> > .id_table = syscon_ids,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists