kern :info : [ 0.000000] Initializing cgroup subsys cpuset kern :info : [ 0.000000] Initializing cgroup subsys cpu kern :info : [ 0.000000] Initializing cgroup subsys cpuacct kern :notice: [ 0.000000] Linux version 3.16.3-gentoo (root@ymir) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #1 SMP Thu Sep 25 16:54:52 CEST 2014 kern :info : [ 0.000000] Command line: BOOT_IMAGE=/boot/gentoo-linux-3.16.3-gentoo root=/dev/sda3 ro console=tty1 video=1680x1050 splash=silent,fadein,theme:livedvd-12.0 net.ifnames=0 radeon.dpm=1 kern :info : [ 0.000000] Disabled fast string operations kern :info : [ 0.000000] e820: BIOS-provided physical RAM map: kern :info : [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable kern :info : [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000000d6000-0x00000000000d7fff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd4a0fff] usable kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd4a1000-0x00000000bd4a6fff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd4a7000-0x00000000bd5b7fff] usable kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd5b8000-0x00000000bd60efff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd60f000-0x00000000bd6c5fff] usable kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6c6000-0x00000000bd6d0fff] ACPI NVS kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6d1000-0x00000000bd6d3fff] ACPI data kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6d4000-0x00000000bd6d7fff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6d8000-0x00000000bd6dbfff] ACPI NVS kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6dc000-0x00000000bd6defff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd6df000-0x00000000bd705fff] ACPI NVS kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd706000-0x00000000bd707fff] ACPI data kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd708000-0x00000000bd90efff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd90f000-0x00000000bd99efff] ACPI NVS kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd99f000-0x00000000bd9fefff] ACPI data kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bd9ff000-0x00000000bd9fffff] usable kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000bdc00000-0x00000000bfffffff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved kern :info : [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023bffffff] usable kern :info : [ 0.000000] NX (Execute Disable) protection: active kern :info : [ 0.000000] SMBIOS 2.4 present. kern :debug : [ 0.000000] DMI: LENOVO 2082BSG/2082BSG, BIOS 7VET80WW (3.10 ) 10/02/2009 kern :debug : [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved kern :debug : [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable kern :info : [ 0.000000] AGP: No AGP bridge found kern :info : [ 0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000 kern :debug : [ 0.000000] MTRR default type: uncachable kern :debug : [ 0.000000] MTRR fixed ranges enabled: kern :debug : [ 0.000000] 00000-9FFFF write-back kern :debug : [ 0.000000] A0000-BFFFF uncachable kern :debug : [ 0.000000] C0000-D7FFF write-protect kern :debug : [ 0.000000] D8000-DBFFF uncachable kern :debug : [ 0.000000] DC000-FFFFF write-protect kern :debug : [ 0.000000] MTRR variable ranges enabled: kern :debug : [ 0.000000] 0 base 23C000000 mask FFC000000 uncachable kern :debug : [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable kern :debug : [ 0.000000] 2 base 000000000 mask F80000000 write-back kern :debug : [ 0.000000] 3 base 080000000 mask FC0000000 write-back kern :debug : [ 0.000000] 4 base 100000000 mask F00000000 write-back kern :debug : [ 0.000000] 5 base 200000000 mask FC0000000 write-back kern :debug : [ 0.000000] 6 base 0BDE00000 mask FFFE00000 uncachable kern :info : [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kern :debug : [ 0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved kern :info : [ 0.000000] e820: last_pfn = 0xbda00 max_arch_pfn = 0x400000000 kern :info : [ 0.000000] found SMP MP-table at [mem 0x000f6490-0x000f649f] mapped at [ffff8800000f6490] kern :info : [ 0.000000] Scanning 1 areas for low memory corruption kern :debug : [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 kern :info : [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] kern :debug : [ 0.000000] [mem 0x00000000-0x000fffff] page 4k kern :debug : [ 0.000000] BRK [0x0275a000, 0x0275afff] PGTABLE kern :debug : [ 0.000000] BRK [0x0275b000, 0x0275bfff] PGTABLE kern :debug : [ 0.000000] BRK [0x0275c000, 0x0275cfff] PGTABLE kern :info : [ 0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff] kern :debug : [ 0.000000] [mem 0x23be00000-0x23bffffff] page 2M kern :debug : [ 0.000000] BRK [0x0275d000, 0x0275dfff] PGTABLE kern :info : [ 0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff] kern :debug : [ 0.000000] [mem 0x238000000-0x23bdfffff] page 2M kern :info : [ 0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff] kern :debug : [ 0.000000] [mem 0x200000000-0x237ffffff] page 2M kern :info : [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbd4a0fff] kern :debug : [ 0.000000] [mem 0x00100000-0x001fffff] page 4k kern :debug : [ 0.000000] [mem 0x00200000-0xbd3fffff] page 2M kern :debug : [ 0.000000] [mem 0xbd400000-0xbd4a0fff] page 4k kern :info : [ 0.000000] init_memory_mapping: [mem 0xbd4a7000-0xbd5b7fff] kern :debug : [ 0.000000] [mem 0xbd4a7000-0xbd5b7fff] page 4k kern :info : [ 0.000000] init_memory_mapping: [mem 0xbd60f000-0xbd6c5fff] kern :debug : [ 0.000000] [mem 0xbd60f000-0xbd6c5fff] page 4k kern :debug : [ 0.000000] BRK [0x0275e000, 0x0275efff] PGTABLE kern :info : [ 0.000000] init_memory_mapping: [mem 0xbd9ff000-0xbd9fffff] kern :debug : [ 0.000000] [mem 0xbd9ff000-0xbd9fffff] page 4k kern :debug : [ 0.000000] BRK [0x0275f000, 0x0275ffff] PGTABLE kern :info : [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] kern :debug : [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M kern :info : [ 0.000000] RAMDISK: [mem 0x37ea8000-0x37f4bfff] kern :info : [ 0.000000] ACPI: Early table checksum verification disabled kern :notice: [ 0.000000] ACPI: RSDP 0x00000000000F6450 000024 (v02 LENOVO) kern :notice: [ 0.000000] ACPI: XSDT 0x00000000BD949C22 000094 (v01 LENOVO TP-7V 00003100 LTP 00000000) kern :notice: [ 0.000000] ACPI: FACP 0x00000000BD949D00 0000F4 (v03 LENOVO TP-7V 00003100 LNVO 00000001) kern :notice: [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20140424/tbfadt-618) kern :notice: [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20140424/tbfadt-699) kern :notice: [ 0.000000] ACPI: DSDT 0x00000000BD94A10E 00FAC1 (v01 LENOVO TP-7V 00003100 MSFT 03000000) kern :notice: [ 0.000000] ACPI: FACS 0x00000000BD98E000 000040 kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD949EB4 00025A (v01 LENOVO TP-7V 00003100 MSFT 03000000) kern :notice: [ 0.000000] ACPI: ECDT 0x00000000BD959BCF 000052 (v01 LENOVO TP-7V 00003100 LNVO 00000001) kern :notice: [ 0.000000] ACPI: APIC 0x00000000BD959C21 000078 (v01 LENOVO TP-7V 00003100 LNVO 00000001) kern :notice: [ 0.000000] ACPI: MCFG 0x00000000BD959C99 00003C (v01 LENOVO TP-7V 00003100 LNVO 00000001) kern :notice: [ 0.000000] ACPI: HPET 0x00000000BD959CD5 000038 (v01 LENOVO TP-7V 00003100 LNVO 00000001) kern :notice: [ 0.000000] ACPI: SLIC 0x00000000BD959E62 000176 (v01 LENOVO TP-7V 00003100 LTP 00000000) kern :notice: [ 0.000000] ACPI: BOOT 0x00000000BD959FD8 000028 (v01 LENOVO TP-7V 00003100 LTP 00000001) kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD98D1FA 000568 (v01 LENOVO TP-7V 00003100 INTL 20050513) kern :notice: [ 0.000000] ACPI: TCPA 0x00000000BD707000 000032 (v00 00000000 00000000) kern :notice: [ 0.000000] ACPI: DMAR 0x00000000BD706000 000110 (v01 ? 00000001 00000000) kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD6D3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624) kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD6D2000 000274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) kern :notice: [ 0.000000] ACPI: SSDT 0x00000000BD6D1000 000242 (v01 PmRef ApTst 00003000 INTL 20050624) kern :notice: [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T500 kern :debug : [ 0.000000] ACPI: Local APIC address 0xfee00000 kern :debug : [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0 kern :notice: [ 0.000000] Zone ranges: kern :notice: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] kern :notice: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] kern :notice: [ 0.000000] Normal [mem 0x100000000-0x23bffffff] kern :notice: [ 0.000000] Movable zone start for each node kern :notice: [ 0.000000] Early memory node ranges kern :notice: [ 0.000000] node 0: [mem 0x00001000-0x00099fff] kern :notice: [ 0.000000] node 0: [mem 0x00100000-0xbd4a0fff] kern :notice: [ 0.000000] node 0: [mem 0xbd4a7000-0xbd5b7fff] kern :notice: [ 0.000000] node 0: [mem 0xbd60f000-0xbd6c5fff] kern :notice: [ 0.000000] node 0: [mem 0xbd9ff000-0xbd9fffff] kern :notice: [ 0.000000] node 0: [mem 0x100000000-0x23bffffff] kern :debug : [ 0.000000] On node 0 totalpages: 2070019 kern :debug : [ 0.000000] DMA zone: 64 pages used for memmap kern :debug : [ 0.000000] DMA zone: 21 pages reserved kern :debug : [ 0.000000] DMA zone: 3993 pages, LIFO batch:0 kern :debug : [ 0.000000] DMA32 zone: 12058 pages used for memmap kern :debug : [ 0.000000] DMA32 zone: 771690 pages, LIFO batch:31 kern :debug : [ 0.000000] Normal zone: 20224 pages used for memmap kern :debug : [ 0.000000] Normal zone: 1294336 pages, LIFO batch:31 kern :info : [ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff kern :info : [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 kern :debug : [ 0.000000] ACPI: Local APIC address 0xfee00000 kern :info : [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) kern :info : [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) kern :info : [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) kern :info : [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) kern :info : [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) kern :info : [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) kern :info : [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) kern :info : [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 kern :info : [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) kern :info : [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) kern :debug : [ 0.000000] ACPI: IRQ0 used by override. kern :debug : [ 0.000000] ACPI: IRQ2 used by override. kern :debug : [ 0.000000] ACPI: IRQ9 used by override. kern :info : [ 0.000000] Using ACPI (MADT) for SMP configuration information kern :info : [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 kern :info : [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs kern :debug : [ 0.000000] nr_irqs_gsi: 40 kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d5fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x000d6000-0x000d7fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x000d8000-0x000dbfff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd4a1000-0xbd4a6fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd5b8000-0xbd60efff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6c6000-0xbd6d0fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6d1000-0xbd6d3fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6d4000-0xbd6d7fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6d8000-0xbd6dbfff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6dc000-0xbd6defff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd6df000-0xbd705fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd706000-0xbd707fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd708000-0xbd90efff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd90f000-0xbd99efff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbd99f000-0xbd9fefff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbda00000-0xbdbfffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xbdc00000-0xbfffffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed0ffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] kern :info : [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] kern :info : [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices kern :info : [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 kern :info : [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023bc00000 s80448 r8192 d21952 u524288 kern :debug : [ 0.000000] pcpu-alloc: s80448 r8192 d21952 u524288 alloc=1*2097152 kern :debug : [ 0.000000] pcpu-alloc: [0] 0 1 2 3 kern :notice: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037652 kern :notice: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/gentoo-linux-3.16.3-gentoo root=/dev/sda3 ro console=tty1 video=1680x1050 splash=silent,fadein,theme:livedvd-12.0 net.ifnames=0 radeon.dpm=1 kern :info : [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) kern :info : [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) kern :info : [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) kern :info : [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 kern :info : [ 0.000000] AGP: Checking aperture... kern :info : [ 0.000000] AGP: No AGP bridge found kern :notice: [ 0.000000] Memory: 8045372K/8280076K available (11281K kernel code, 1187K rwdata, 6976K rodata, 1068K init, 1128K bss, 234704K reserved) kern :info : [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 kern :info : [ 0.000000] Hierarchical RCU implementation. kern :info : [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. kern :info : [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 kern :info : [ 0.000000] Console: colour VGA+ 80x25 kern :info : [ 0.000000] console [tty1] enabled kern :debug : [ 0.000000] hpet clockevent registered kern :info : [ 0.000000] tsc: Fast TSC calibration using PIT kern :info : [ 0.000000] tsc: Detected 2792.856 MHz processor kern :info : [ 0.002011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.71 BogoMIPS (lpj=2792856) kern :info : [ 0.002159] pid_max: default: 32768 minimum: 301 kern :info : [ 0.002236] ACPI: Core revision 20140424 kern :notice: [ 0.012203] ACPI: All ACPI Tables successfully acquired kern :info : [ 0.013035] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) kern :info : [ 0.013112] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) kern :info : [ 0.014108] Initializing cgroup subsys devices kern :info : [ 0.014186] Initializing cgroup subsys freezer kern :info : [ 0.014259] Initializing cgroup subsys net_cls kern :info : [ 0.014336] Initializing cgroup subsys blkio kern :info : [ 0.014947] Initializing cgroup subsys bfqio kern :info : [ 0.015025] Disabled fast string operations kern :info : [ 0.015100] CPU: Physical Processor ID: 0 kern :info : [ 0.015171] CPU: Processor Core ID: 0 kern :info : [ 0.015243] mce: CPU supports 6 MCE banks kern :info : [ 0.015320] CPU0: Thermal monitoring enabled (TM2) kern :info : [ 0.015398] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 tlb_flushall_shift: -1 kern :info : [ 0.015625] Freeing SMP alternatives memory: 36K (ffffffff82635000 - ffffffff8263e000) kern :info : [ 0.016233] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 kern :info : [ 0.026315] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz (fam: 06, model: 17, stepping: 0a) kern :info : [ 0.027000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. kern :info : [ 0.027000] ... version: 2 kern :info : [ 0.027000] ... bit width: 40 kern :info : [ 0.027000] ... generic registers: 2 kern :info : [ 0.027000] ... value mask: 000000ffffffffff kern :info : [ 0.027000] ... max period: 000000007fffffff kern :info : [ 0.027000] ... fixed-purpose events: 3 kern :info : [ 0.027000] ... event mask: 0000000700000003 kern :info : [ 0.027159] x86: Booting SMP configuration: kern :info : [ 0.027232] .... node #0, CPUs: #1 kern :info : [ 0.003000] Disabled fast string operations kern :info : [ 0.039029] x86: Booted up 1 node, 2 CPUs kern :info : [ 0.039242] smpboot: Total of 2 processors activated (11171.42 BogoMIPS) kern :info : [ 0.040121] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. kern :info : [ 0.041071] devtmpfs: initialized kern :info : [ 0.042051] PM: Registering ACPI NVS region [mem 0xbd6c6000-0xbd6d0fff] (45056 bytes) kern :info : [ 0.042156] PM: Registering ACPI NVS region [mem 0xbd6d8000-0xbd6dbfff] (16384 bytes) kern :info : [ 0.042259] PM: Registering ACPI NVS region [mem 0xbd6df000-0xbd705fff] (159744 bytes) kern :info : [ 0.042362] PM: Registering ACPI NVS region [mem 0xbd90f000-0xbd99efff] (589824 bytes) kern :info : [ 0.042511] pinctrl core: initialized pinctrl subsystem kern :info : [ 0.042511] NET: Registered protocol family 16 kern :info : [ 0.043024] cpuidle: using governor ladder kern :info : [ 0.043024] cpuidle: using governor menu kern :info : [ 0.043024] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it kern :info : [ 0.043024] ACPI: bus type PCI registered kern :info : [ 0.043024] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 kern :info : [ 0.043127] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) kern :info : [ 0.043233] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 kern :info : [ 0.043379] PCI: Using configuration type 1 for base access kern :info : [ 0.049183] ACPI: Added _OSI(Module Device) kern :info : [ 0.049183] ACPI: Added _OSI(Processor Device) kern :info : [ 0.049215] ACPI: Added _OSI(3.0 _SCP Extensions) kern :info : [ 0.049287] ACPI: Added _OSI(Processor Aggregator Device) kern :info : [ 0.049287] ACPI: Added _OSI(Linux) kern :info : [ 0.050534] ACPI : EC: EC description table is found, configuring boot EC kern :notice: [ 0.054999] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI kern :notice: [ 0.065303] ACPI: Dynamic OEM Table Load: kern :notice: [ 0.065461] ACPI: SSDT 0xFFFF880232BE2800 00030A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) kern :notice: [ 0.065471] ACPI: Dynamic OEM Table Load: kern :notice: [ 0.065627] ACPI: SSDT 0xFFFF880232BBD000 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) kern :notice: [ 0.072173] ACPI: Dynamic OEM Table Load: kern :notice: [ 0.072329] ACPI: SSDT 0xFFFF880232876400 0001CF (v01 PmRef ApIst 00003000 INTL 20050624) kern :notice: [ 0.075057] ACPI: Dynamic OEM Table Load: kern :notice: [ 0.075211] ACPI: SSDT 0xFFFF880231D8F3C0 00008D (v01 PmRef ApCst 00003000 INTL 20050624) kern :info : [ 0.080068] ACPI: Interpreter enabled kern :notice: [ 0.080144] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) kern :notice: [ 0.080330] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) kern :info : [ 0.080525] ACPI: (supports S0 S3 S4 S5) kern :info : [ 0.080597] ACPI: Using IOAPIC for interrupt routing kern :info : [ 0.080695] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug kern :info : [ 0.087126] ACPI: Power Resource [PUBS] (on) kern :info : [ 0.087167] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) kern :info : [ 0.088978] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) kern :info : [ 0.091300] acpi IBM0079:00: ACPI dock station (docks/bays count: 3) kern :info : [ 0.092013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) kern :info : [ 0.092205] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) kern :info : [ 0.092747] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) kern :info : [ 0.093310] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) kern :info : [ 0.093850] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) kern :info : [ 0.094376] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) kern :info : [ 0.094916] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) kern :info : [ 0.095457] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) kern :info : [ 0.096038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) kern :info : [ 0.096116] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] kern :info : [ 0.096601] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] kern :info : [ 0.096726] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge kern :info : [ 0.097000] PCI host bridge to bus 0000:00 kern :info : [ 0.097003] pci_bus 0000:00: root bus resource [bus 00-ff] kern :info : [ 0.097077] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] kern :info : [ 0.097152] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] kern :info : [ 0.097228] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] kern :info : [ 0.097304] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] kern :info : [ 0.097380] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] kern :debug : [ 0.097462] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 kern :debug : [ 0.098004] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 kern :debug : [ 0.098004] pci 0000:00:02.0: reg 0x10: [mem 0xf4400000-0xf47fffff 64bit] kern :debug : [ 0.098004] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] kern :debug : [ 0.098004] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807] kern :debug : [ 0.098013] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 kern :debug : [ 0.098013] pci 0000:00:02.1: reg 0x10: [mem 0xf4200000-0xf42fffff 64bit] kern :debug : [ 0.098013] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000 kern :debug : [ 0.098013] pci 0000:00:03.0: reg 0x10: [mem 0xfc325800-0xfc32580f 64bit] kern :debug : [ 0.098013] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold kern :debug : [ 0.098013] pci 0000:00:19.0: [8086:10bf] type 00 class 0x020000 kern :debug : [ 0.098013] pci 0000:00:19.0: reg 0x10: [mem 0xfc100000-0xfc11ffff] kern :debug : [ 0.098013] pci 0000:00:19.0: reg 0x14: [mem 0xfc324000-0xfc324fff] kern :debug : [ 0.098013] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f] kern :debug : [ 0.098060] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold kern :info : [ 0.098100] pci 0000:00:19.0: System wakeup disabled by ACPI kern :debug : [ 0.098216] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 kern :debug : [ 0.098270] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f] kern :info : [ 0.098358] pci 0000:00:1a.0: System wakeup disabled by ACPI kern :debug : [ 0.099000] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 kern :debug : [ 0.099000] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f] kern :debug : [ 0.099013] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 kern :debug : [ 0.099013] pci 0000:00:1a.2: reg 0x20: [io 0x1880-0x189f] kern :info : [ 0.099013] pci 0000:00:1a.2: System wakeup disabled by ACPI kern :debug : [ 0.099013] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 kern :debug : [ 0.099013] pci 0000:00:1a.7: reg 0x10: [mem 0xfc325c00-0xfc325fff] kern :debug : [ 0.099033] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold kern :info : [ 0.099071] pci 0000:00:1a.7: System wakeup disabled by ACPI kern :debug : [ 0.099193] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 kern :debug : [ 0.099215] pci 0000:00:1b.0: reg 0x10: [mem 0xfc320000-0xfc323fff 64bit] kern :debug : [ 0.099316] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold kern :info : [ 0.099357] pci 0000:00:1b.0: System wakeup disabled by ACPI kern :debug : [ 0.100000] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 kern :debug : [ 0.100000] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold kern :info : [ 0.100000] pci 0000:00:1c.0: System wakeup disabled by ACPI kern :debug : [ 0.100013] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 kern :debug : [ 0.100013] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold kern :info : [ 0.100013] pci 0000:00:1c.1: System wakeup disabled by ACPI kern :debug : [ 0.100013] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 kern :debug : [ 0.100106] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold kern :info : [ 0.100146] pci 0000:00:1c.2: System wakeup disabled by ACPI kern :debug : [ 0.100262] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 kern :debug : [ 0.100368] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold kern :info : [ 0.100407] pci 0000:00:1c.3: System wakeup disabled by ACPI kern :debug : [ 0.101003] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 kern :debug : [ 0.101003] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold kern :info : [ 0.101003] pci 0000:00:1c.4: System wakeup disabled by ACPI kern :debug : [ 0.101013] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 kern :debug : [ 0.101013] pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf] kern :info : [ 0.101013] pci 0000:00:1d.0: System wakeup disabled by ACPI kern :debug : [ 0.101042] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 kern :debug : [ 0.101095] pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df] kern :debug : [ 0.101203] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 kern :debug : [ 0.101256] pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff] kern :debug : [ 0.102001] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 kern :debug : [ 0.102001] pci 0000:00:1d.7: reg 0x10: [mem 0xfc326000-0xfc3263ff] kern :debug : [ 0.102001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold kern :info : [ 0.102001] pci 0000:00:1d.7: System wakeup disabled by ACPI kern :debug : [ 0.102013] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 kern :info : [ 0.102013] pci 0000:00:1e.0: System wakeup disabled by ACPI kern :debug : [ 0.102013] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 kern :debug : [ 0.102078] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 kern :debug : [ 0.102104] pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f] kern :debug : [ 0.102115] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f] kern :debug : [ 0.102125] pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817] kern :debug : [ 0.102135] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b] kern :debug : [ 0.102145] pci 0000:00:1f.2: reg 0x20: [io 0x1c00-0x1c1f] kern :debug : [ 0.102156] pci 0000:00:1f.2: reg 0x24: [mem 0xfc325000-0xfc3257ff] kern :debug : [ 0.102223] pci 0000:00:1f.2: PME# supported from D3hot kern :debug : [ 0.102297] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 kern :debug : [ 0.102317] pci 0000:00:1f.3: reg 0x10: [mem 0xfc326400-0xfc3264ff 64bit] kern :debug : [ 0.102345] pci 0000:00:1f.3: reg 0x20: [io 0x1c20-0x1c3f] kern :info : [ 0.103013] pci 0000:00:1c.0: PCI bridge to [bus 02] kern :debug : [ 0.103013] pci 0000:03:00.0: [8086:4236] type 00 class 0x028000 kern :debug : [ 0.103013] pci 0000:03:00.0: reg 0x10: [mem 0xf4300000-0xf4301fff 64bit] kern :debug : [ 0.103013] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold kern :info : [ 0.105020] pci 0000:00:1c.1: PCI bridge to [bus 03] kern :debug : [ 0.105101] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] kern :debug : [ 0.105205] pci 0000:04:00.0: [8086:444e] type 00 class 0x058000 kern :debug : [ 0.105236] pci 0000:04:00.0: reg 0x10: [mem 0xfc000000-0xfc0003ff] kern :debug : [ 0.105270] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x20ff] kern :debug : [ 0.106034] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] kern :info : [ 0.108018] pci 0000:00:1c.2: PCI bridge to [bus 04] kern :debug : [ 0.108095] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] kern :debug : [ 0.108100] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfc0fffff] kern :info : [ 0.108187] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] kern :debug : [ 0.108264] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] kern :debug : [ 0.108268] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] kern :debug : [ 0.108275] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] kern :info : [ 0.108348] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] kern :debug : [ 0.108425] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] kern :debug : [ 0.108429] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] kern :debug : [ 0.108436] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] kern :debug : [ 0.108497] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700 kern :notice: [ 0.108519] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function) kern :notice: [ 0.108624] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller kern :debug : [ 0.108743] pci 0000:15:00.0: reg 0x10: [mem 0xf4800000-0xf4800fff] kern :debug : [ 0.108785] pci 0000:15:00.0: supports D1 D2 kern :debug : [ 0.108786] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold kern :debug : [ 0.108850] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010 kern :debug : [ 0.108875] pci 0000:15:00.1: reg 0x10: [mem 0xf4801000-0xf48017ff] kern :debug : [ 0.108987] pci 0000:15:00.1: supports D1 D2 kern :debug : [ 0.108988] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold kern :debug : [ 0.109050] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500 kern :debug : [ 0.109075] pci 0000:15:00.2: reg 0x10: [mem 0xf4801800-0xf48018ff] kern :debug : [ 0.109187] pci 0000:15:00.2: supports D1 D2 kern :debug : [ 0.109188] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold kern :debug : [ 0.109250] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000 kern :debug : [ 0.109274] pci 0000:15:00.4: reg 0x10: [mem 0xf4802000-0xf48020ff] kern :debug : [ 0.109386] pci 0000:15:00.4: supports D1 D2 kern :debug : [ 0.109388] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold kern :debug : [ 0.109447] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000 kern :debug : [ 0.109471] pci 0000:15:00.5: reg 0x10: [mem 0xf4802400-0xf48024ff] kern :debug : [ 0.109583] pci 0000:15:00.5: supports D1 D2 kern :debug : [ 0.109584] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold kern :info : [ 0.109692] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) kern :debug : [ 0.109771] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff] kern :debug : [ 0.109776] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] kern :debug : [ 0.109783] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] kern :debug : [ 0.109784] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) kern :debug : [ 0.109786] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) kern :debug : [ 0.109788] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) kern :debug : [ 0.109789] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) kern :debug : [ 0.109791] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) kern :debug : [ 0.109849] pci_bus 0000:16: busn_res: [bus 16-18] end is updated to 17 kern :debug : [ 0.109895] pci_bus 0000:00: on NUMA node 0 kern :info : [ 0.109896] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) kern :notice: [ 0.111317] ACPI: Enabled 3 GPEs in block 00 to 3F kern :info : [ 0.111529] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 kern :info : [ 0.112050] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none kern :info : [ 0.112125] vgaarb: loaded kern :info : [ 0.112195] vgaarb: bridge control possible 0000:00:02.0 kern :notice: [ 0.112347] SCSI subsystem initialized kern :debug : [ 0.112457] libata version 3.00 loaded. kern :info : [ 0.112470] ACPI: bus type USB registered kern :info : [ 0.112569] usbcore: registered new interface driver usbfs kern :info : [ 0.112654] usbcore: registered new interface driver hub kern :info : [ 0.112739] usbcore: registered new device driver usb kern :info : [ 0.112739] Linux video capture interface: v2.00 kern :info : [ 0.113023] pps_core: LinuxPPS API ver. 1 registered kern :info : [ 0.113096] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti kern :info : [ 0.113207] PTP clock support registered kern :info : [ 0.113294] EDAC MC: Ver: 3.0.0 kern :info : [ 0.113548] Advanced Linux Sound Architecture Driver Initialized. kern :info : [ 0.113625] PCI: Using ACPI for IRQ routing kern :debug : [ 0.115932] PCI: pci_cache_line_size set to 64 bytes kern :debug : [ 0.116024] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] kern :debug : [ 0.116026] e820: reserve RAM buffer [mem 0xbd4a1000-0xbfffffff] kern :debug : [ 0.116028] e820: reserve RAM buffer [mem 0xbd5b8000-0xbfffffff] kern :debug : [ 0.116029] e820: reserve RAM buffer [mem 0xbd6c6000-0xbfffffff] kern :debug : [ 0.116031] e820: reserve RAM buffer [mem 0xbda00000-0xbfffffff] kern :info : [ 0.116196] cfg80211: Calling CRDA to update world regulatory domain kern :info : [ 0.116196] HPET: 4 timers in total, 0 timers will be used for per-cpu timer kern :info : [ 0.116196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 kern :info : [ 0.116438] hpet0: 4 comparators, 64-bit 14.318180 MHz counter kern :info : [ 0.118067] Switched to clocksource hpet kern :notice: [ 0.125271] FS-Cache: Loaded kern :info : [ 0.127527] pnp: PnP ACPI init kern :info : [ 0.127612] ACPI: bus type PNP registered kern :info : [ 0.148027] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved kern :info : [ 0.148105] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved kern :info : [ 0.148181] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved kern :info : [ 0.148258] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved kern :info : [ 0.148334] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved kern :info : [ 0.148409] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved kern :info : [ 0.148485] system 00:00: [mem 0x000d4000-0x000d7fff] could not be reserved kern :info : [ 0.148561] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved kern :info : [ 0.148637] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved kern :info : [ 0.148714] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved kern :info : [ 0.148790] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved kern :info : [ 0.148866] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved kern :info : [ 0.148942] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved kern :info : [ 0.149024] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved kern :info : [ 0.149101] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved kern :debug : [ 0.149179] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) kern :info : [ 0.169225] system 00:01: [io 0x1000-0x107f] could not be reserved kern :info : [ 0.169304] system 00:01: [io 0x1180-0x11ff] has been reserved kern :info : [ 0.169379] system 00:01: [io 0x0800-0x080f] has been reserved kern :info : [ 0.169456] system 00:01: [io 0x15e0-0x15ef] has been reserved kern :info : [ 0.169531] system 00:01: [io 0x1600-0x167f] has been reserved kern :info : [ 0.169606] system 00:01: [io 0x1680-0x169f] has been reserved kern :info : [ 0.169681] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved kern :info : [ 0.169757] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved kern :info : [ 0.170379] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved kern :info : [ 0.170458] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved kern :info : [ 0.170533] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved kern :info : [ 0.170609] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved kern :info : [ 0.170685] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved kern :debug : [ 0.170762] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) kern :debug : [ 0.170826] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) kern :debug : [ 0.170857] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) kern :debug : [ 0.170887] pnp 00:04: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) kern :debug : [ 0.170964] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled) kern :debug : [ 0.171101] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) kern :info : [ 0.191464] pnp: PnP ACPI: found 7 devices kern :info : [ 0.191537] ACPI: bus type PNP unregistered kern :debug : [ 0.196203] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 kern :debug : [ 0.196206] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 kern :debug : [ 0.196209] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 kern :debug : [ 0.196218] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 kern :debug : [ 0.196221] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 kern :debug : [ 0.196230] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 kern :debug : [ 0.196267] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 kern :debug : [ 0.196269] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 kern :debug : [ 0.196271] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 kern :debug : [ 0.196273] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 kern :debug : [ 0.196275] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 kern :debug : [ 0.196276] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 kern :info : [ 0.196282] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff] kern :info : [ 0.196361] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref] kern :info : [ 0.196467] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref] kern :info : [ 0.196573] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref] kern :info : [ 0.196677] pci 0000:00:1c.0: BAR 7: assigned [io 0x9000-0x9fff] kern :info : [ 0.196753] pci 0000:00:1c.1: BAR 7: assigned [io 0xa000-0xafff] kern :info : [ 0.196829] pci 0000:00:1c.0: PCI bridge to [bus 02] kern :info : [ 0.196904] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] kern :info : [ 0.196983] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] kern :info : [ 0.197073] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] kern :info : [ 0.197181] pci 0000:00:1c.1: PCI bridge to [bus 03] kern :info : [ 0.197256] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff] kern :info : [ 0.197334] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] kern :info : [ 0.197413] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] kern :info : [ 0.197522] pci 0000:04:00.0: BAR 6: assigned [mem 0xfc010000-0xfc01ffff pref] kern :info : [ 0.197625] pci 0000:00:1c.2: PCI bridge to [bus 04] kern :info : [ 0.197700] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] kern :info : [ 0.197779] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfc0fffff] kern :info : [ 0.197858] pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] kern :info : [ 0.197965] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] kern :info : [ 0.198054] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] kern :info : [ 0.198132] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] kern :info : [ 0.198211] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] kern :info : [ 0.198320] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] kern :info : [ 0.198395] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] kern :info : [ 0.198473] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] kern :info : [ 0.198551] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] kern :debug : [ 0.198661] pci 0000:15:00.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 kern :debug : [ 0.198663] pci 0000:15:00.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 kern :debug : [ 0.198665] pci 0000:15:00.0: res[7]=[io 0x0100-0x00ff] get_res_add_size add_size 100 kern :debug : [ 0.198667] pci 0000:15:00.0: res[8]=[io 0x0100-0x00ff] get_res_add_size add_size 100 kern :info : [ 0.198670] pci 0000:15:00.0: BAR 9: assigned [mem 0xf0000000-0xf3ffffff pref] kern :info : [ 0.198774] pci 0000:15:00.0: BAR 10: assigned [mem 0xc4000000-0xc7ffffff] kern :info : [ 0.198851] pci 0000:15:00.0: BAR 7: assigned [io 0x5000-0x50ff] kern :info : [ 0.198926] pci 0000:15:00.0: BAR 8: assigned [io 0x5400-0x54ff] kern :info : [ 0.199006] pci 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [ 0.199081] pci 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [ 0.199159] pci 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [ 0.199238] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [ 0.199344] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :info : [ 0.199423] pci 0000:00:1e.0: PCI bridge to [bus 15-18] kern :info : [ 0.199499] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff] kern :info : [ 0.199577] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] kern :info : [ 0.199656] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] kern :debug : [ 0.199764] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] kern :debug : [ 0.199766] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] kern :debug : [ 0.199767] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] kern :debug : [ 0.199769] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff] kern :debug : [ 0.199770] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff] kern :debug : [ 0.199772] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] kern :debug : [ 0.199774] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] kern :debug : [ 0.199775] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] kern :debug : [ 0.199777] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] kern :debug : [ 0.199779] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff] kern :debug : [ 0.199780] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] kern :debug : [ 0.199782] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] kern :debug : [ 0.199784] pci_bus 0000:04: resource 1 [mem 0xfc000000-0xfc0fffff] kern :debug : [ 0.199785] pci_bus 0000:04: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] kern :debug : [ 0.199787] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] kern :debug : [ 0.199788] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff] kern :debug : [ 0.199790] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref] kern :debug : [ 0.199792] pci_bus 0000:0d: resource 0 [io 0x4000-0x4fff] kern :debug : [ 0.199793] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff] kern :debug : [ 0.199795] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref] kern :debug : [ 0.199797] pci_bus 0000:15: resource 0 [io 0x5000-0x8fff] kern :debug : [ 0.199798] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff] kern :debug : [ 0.199800] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref] kern :debug : [ 0.199801] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] kern :debug : [ 0.199802] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] kern :debug : [ 0.199804] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] kern :debug : [ 0.199805] pci_bus 0000:15: resource 7 [mem 0x000d8000-0x000dbfff] kern :debug : [ 0.199807] pci_bus 0000:15: resource 8 [mem 0xc0000000-0xfebfffff] kern :debug : [ 0.199809] pci_bus 0000:16: resource 0 [io 0x5000-0x50ff] kern :debug : [ 0.199810] pci_bus 0000:16: resource 1 [io 0x5400-0x54ff] kern :debug : [ 0.199811] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref] kern :debug : [ 0.199813] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff] kern :info : [ 0.199836] NET: Registered protocol family 2 kern :info : [ 0.200065] TCP established hash table entries: 65536 (order: 7, 524288 bytes) kern :info : [ 0.200383] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) kern :info : [ 0.200873] TCP: Hash tables configured (established 65536 bind 65536) kern :info : [ 0.201012] TCP: reno registered kern :info : [ 0.201087] UDP hash table entries: 4096 (order: 5, 131072 bytes) kern :info : [ 0.201212] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) kern :info : [ 0.201374] NET: Registered protocol family 1 kern :info : [ 0.201519] RPC: Registered named UNIX socket transport module. kern :info : [ 0.201594] RPC: Registered udp transport module. kern :info : [ 0.201666] RPC: Registered tcp transport module. kern :info : [ 0.201739] RPC: Registered tcp NFSv4.1 backchannel transport module. kern :debug : [ 0.201824] pci 0000:00:02.0: Boot video device kern :debug : [ 0.202640] PCI: CLS 64 bytes, default 64 kern :info : [ 0.202677] Trying to unpack rootfs image as initramfs... kern :info : [ 0.209432] Freeing initrd memory: 656K (ffff880037ea8000 - ffff880037f4c000) kern :info : [ 0.209513] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) kern :info : [ 0.209589] software IO TLB [mem 0xb94a1000-0xbd4a1000] (64MB) mapped at [ffff8800b94a1000-ffff8800bd4a0fff] kern :info : [ 0.209767] Simple Boot Flag at 0x35 set to 0x1 kern :info : [ 0.209948] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 kern :info : [ 0.210033] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 kern :info : [ 0.210165] microcode: Microcode Update Driver: v2.00 , Peter Oruba kern :info : [ 0.210429] Scanning for low memory corruption every 60 seconds kern :info : [ 0.211018] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation kern :info : [ 0.211171] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation kern :info : [ 0.211425] sha512_ssse3: Using SSSE3 optimized SHA-512 implementation kern :info : [ 0.211891] futex hash table entries: 1024 (order: 4, 65536 bytes) kern :notice: [ 0.211996] Initialise system trusted keyring kern :info : [ 0.212099] audit: initializing netlink subsys (disabled) kern :notice: [ 0.212181] audit: type=2000 audit(1411673456.211:1): initialized kern :info : [ 0.214185] zbud: loaded kern :notice: [ 0.214383] VFS: Disk quotas dquot_6.5.2 kern :notice: [ 0.214502] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) kern :notice: [ 0.215072] FS-Cache: Netfs 'nfs' registered for caching kern :notice: [ 0.215305] NFS: Registering the id_resolver key type kern :notice: [ 0.215389] Key type id_resolver registered kern :notice: [ 0.215466] Key type id_legacy registered kern :info : [ 0.215547] nfs4filelayout_init: NFSv4 File Layout Driver Registering... kern :notice: [ 0.215674] FS-Cache: Netfs 'cifs' registered for caching kern :notice: [ 0.215820] Key type cifs.idmap registered kern :info : [ 0.215902] ntfs: driver 2.1.30 [Flags: R/W]. kern :info : [ 0.216113] fuse init (API version 7.23) kern :info : [ 0.216310] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled kern :info : [ 0.216766] msgmni has been set to 15714 kern :info : [ 0.218767] alg: No test for lz4 (lz4-generic) kern :info : [ 0.218882] alg: No test for lz4hc (lz4hc-generic) kern :info : [ 0.218997] alg: No test for stdrng (krng) kern :info : [ 0.222508] NET: Registered protocol family 38 kern :notice: [ 0.222585] Key type asymmetric registered kern :info : [ 0.222697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) kern :info : [ 0.222804] io scheduler noop registered kern :info : [ 0.222904] io scheduler cfq registered (default) kern :info : [ 0.222981] io scheduler bfq registered kern :info : [ 0.223060] BFQ I/O-scheduler version: v7r5 kern :debug : [ 0.223278] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X kern :debug : [ 0.223520] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X kern :debug : [ 0.223688] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X kern :debug : [ 0.223857] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X kern :debug : [ 0.224036] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X kern :info : [ 0.224189] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt kern :debug : [ 0.224268] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded kern :info : [ 0.224288] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt kern :info : [ 0.224364] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt kern :debug : [ 0.224442] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded kern :info : [ 0.224461] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt kern :info : [ 0.224538] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt kern :debug : [ 0.224616] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded kern :info : [ 0.224635] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt kern :debug : [ 0.224714] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded kern :info : [ 0.224732] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt kern :debug : [ 0.224811] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded kern :info : [ 0.224820] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 kern :info : [ 0.224960] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+ kern :debug : [ 0.225100] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded kern :info : [ 0.225114] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+ kern :debug : [ 0.225242] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded kern :info : [ 0.225255] pciehp 0000:00:1c.2:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+ kern :debug : [ 0.225385] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded kern :info : [ 0.225398] pciehp 0000:00:1c.3:pcie04: Slot #3 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+ kern :debug : [ 0.225526] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded kern :info : [ 0.225540] pciehp 0000:00:1c.4:pcie04: Slot #4 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+ kern :debug : [ 0.225669] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded kern :info : [ 0.225675] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 kern :info : [ 0.225808] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled kern :debug : [ 0.225960] serial 00:05: [io 0x03f8-0x03ff] kern :debug : [ 0.226056] serial 00:05: [irq 4] kern :info : [ 0.226462] serial 00:05: activated kern :info : [ 0.247137] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A kern :info : [ 0.247661] Non-volatile memory driver v1.3 kern :info : [ 0.247807] Linux agpgart interface v0.103 kern :info : [ 0.247937] agpgart-intel 0000:00:00.0: Intel GM45 Chipset kern :info : [ 0.248033] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable kern :info : [ 0.249725] agpgart-intel 0000:00:00.0: detected 32768K stolen memory kern :info : [ 0.249918] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 kern :debug : [ 0.251867] intel_idle: does not run on family 6 model 23 kern :warn : [ 0.252106] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared kern :info : [ 0.252367] ACPI: AC Adapter [AC] (on-line) kern :info : [ 0.252524] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 kern :info : [ 0.252762] ACPI: Lid Switch [LID] kern :info : [ 0.252927] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 kern :info : [ 0.253103] ACPI: Sleep Button [SLPB] kern :info : [ 0.253222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 kern :info : [ 0.253331] ACPI: Power Button [PWRF] kern :debug : [ 0.254579] Monitor-Mwait will be used to enter C-1 state kern :debug : [ 0.254583] Monitor-Mwait will be used to enter C-2 state kern :debug : [ 0.254586] Monitor-Mwait will be used to enter C-3 state kern :info : [ 0.254589] tsc: Marking TSC unstable due to TSC halts in idle kern :debug : [ 0.254671] ACPI: acpi_idle registered with cpuidle kern :info : [ 0.256733] thermal LNXTHERM:00: registered as thermal_zone0 kern :info : [ 0.256814] ACPI: Thermal Zone [THM0] (35 C) kern :info : [ 0.258224] thermal LNXTHERM:01: registered as thermal_zone1 kern :info : [ 0.258305] ACPI: Thermal Zone [THM1] (36 C) kern :info : [ 0.258418] GHES: HEST is not enabled! kern :info : [ 0.258538] [drm] Initialized drm 1.1.0 20060810 kern :info : [ 0.258699] [drm] radeon kernel modesetting enabled. kern :info : [ 0.258851] VGA switcheroo: detected switching method \_SB_.PCI0.VID_.ATPX handle kern :info : [ 0.259532] [drm] Memory usable by graphics device = 2048M kern :info : [ 0.259636] [drm] Replacing VGA console driver kern :info : [ 0.260486] Console: switching to colour dummy device 80x25 kern :debug : [ 0.267076] i915 0000:00:02.0: irq 45 for MSI/MSI-X kern :info : [ 0.267090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). kern :info : [ 0.267095] [drm] Driver supports precise vblank timestamp query. kern :info : [ 0.267197] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem kern :warn : [ 0.271920] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared kern :info : [ 0.271931] ACPI: Battery Slot [BAT0] (battery present) kern :info : [ 0.342655] fbcon: inteldrmfb (fb0) is primary device kern :info : [ 0.927056] Console: switching to colour frame buffer device 210x65 kern :info : [ 0.930864] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device kern :info : [ 0.930892] i915 0000:00:02.0: registered panic notifier kern :info : [ 0.964176] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) kern :info : [ 0.972245] acpi device:01: registered as cooling_device2 kern :info : [ 0.972336] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 kern :info : [ 0.972407] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 kern :info : [ 0.972514] parport_pc 00:06: reported by Plug and Play ACPI kern :info : [ 0.972564] parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)] kern :info : [ 0.973966] brd: module loaded kern :info : [ 0.974307] loop: module loaded kern :info : [ 0.974457] zram: Created 1 device(s) ... kern :notice: [ 0.974556] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\_SB_.PCI0.LPC_.PMIO) (20140424/utaddress-258) kern :info : [ 0.974633] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver kern :notice: [ 0.974676] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-258) kern :info : [ 0.974750] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver kern :notice: [ 0.974791] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-258) kern :info : [ 0.974864] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver kern :warn : [ 0.974906] lpc_ich: Resource conflict(s) found affecting gpio_ich kern :debug : [ 0.975049] ahci 0000:00:1f.2: version 3.0 kern :debug : [ 0.975150] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X kern :info : [ 0.975186] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled kern :info : [ 0.975235] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode kern :info : [ 0.975270] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs kern :info : [ 0.975777] scsi0 : ahci kern :info : [ 0.975869] scsi1 : ahci kern :info : [ 0.975952] scsi2 : ahci kern :info : [ 0.976047] scsi3 : ahci kern :info : [ 0.976104] ata1: SATA max UDMA/133 abar m2048@0xfc325000 port 0xfc325100 irq 46 kern :info : [ 0.976139] ata2: SATA max UDMA/133 abar m2048@0xfc325000 port 0xfc325180 irq 46 kern :info : [ 0.976171] ata3: DUMMY kern :info : [ 0.976182] ata4: DUMMY kern :info : [ 0.976441] tun: Universal TUN/TAP device driver, 1.6 kern :info : [ 0.976463] tun: (C) 1999-2004 Max Krasnyansky kern :info : [ 0.976547] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI kern :info : [ 0.976571] e100: Copyright(c) 1999-2006 Intel Corporation kern :info : [ 0.976615] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI kern :info : [ 0.978255] e1000: Copyright (c) 1999-2006 Intel Corporation. kern :info : [ 0.979933] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k kern :info : [ 0.981567] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. kern :info : [ 0.983339] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode kern :debug : [ 0.985017] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X kern :info : [ 1.042333] fbcondecor: console 0 using theme 'livedvd-12.0' kern :info : [ 1.067557] fbcondecor: switched decor state to 'on' on console 0 kern :info : [ 1.178442] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:68:18:ff:f6 kern :info : [ 1.178455] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection kern :info : [ 1.178485] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF kern :info : [ 1.178533] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k kern :info : [ 1.178539] igb: Copyright (c) 2007-2014 Intel Corporation. kern :info : [ 1.178570] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k kern :info : [ 1.178576] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. kern :info : [ 1.178599] Intel(R) Wireless WiFi driver for Linux, in-tree: kern :info : [ 1.178605] Copyright(c) 2003- 2014 Intel Corporation kern :warn : [ 1.178709] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control kern :debug : [ 1.178772] iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X kern :info : [ 1.178990] usbcore: registered new interface driver cdc_ether kern :info : [ 1.179014] usbcore: registered new interface driver cdc_eem kern :info : [ 1.179037] usbcore: registered new interface driver cdc_ncm kern :info : [ 1.179052] usbcore: registered new interface driver cdc_mbim kern :info : [ 1.179283] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm kern :info : [ 1.179306] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled kern :info : [ 1.179313] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled kern :info : [ 1.179319] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled kern :info : [ 1.179325] iwlwifi 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 kern :info : [ 1.179379] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :debug : [ 1.201967] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' kern :notice: [ 1.254079] firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 kern :info : [ 1.254242] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] kern :info : [ 1.292058] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kern :debug : [ 1.295109] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [ 1.295112] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [ 1.295118] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [ 1.295291] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [ 1.295373] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [ 1.295375] ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0BB6Q, max UDMA/133 kern :info : [ 1.295381] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA kern :debug : [ 1.296661] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [ 1.296664] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [ 1.296671] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [ 1.296815] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [ 1.296872] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [ 1.296875] ata1.00: configured for UDMA/133 kern :notice: [ 1.296972] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5 kern :notice: [ 1.297200] sd 0:0:0:0: Attached scsi generic sg0 type 0 kern :notice: [ 1.297275] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) kern :notice: [ 1.297343] sd 0:0:0:0: [sda] Write Protect is off kern :debug : [ 1.297350] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 kern :notice: [ 1.297371] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern :info : [ 1.297988] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > kern :notice: [ 1.298363] sd 0:0:0:0: [sda] Attached SCSI disk kern :info : [ 1.602054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) kern :debug : [ 1.604557] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [ 1.605828] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [ 1.605830] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :info : [ 1.606953] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.D2, max UDMA/100 kern :debug : [ 1.610150] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [ 1.611481] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [ 1.611483] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :info : [ 1.612478] ata2.00: configured for UDMA/100 kern :notice: [ 1.615054] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.D2 PQ: 0 ANSI: 5 kern :notice: [ 1.640308] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray kern :info : [ 1.640317] cdrom: Uniform CD-ROM driver Revision: 3.20 kern :debug : [ 1.640449] sr 1:0:0:0: Attached scsi CD-ROM sr0 kern :notice: [ 1.640511] sr 1:0:0:0: Attached scsi generic sg1 type 5 kern :notice: [ 1.755241] firewire_core 0000:15:00.1: created device fw0: GUID 00016c2000b3533e, S400 kern :info : [ 1.762811] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c38, PCI irq 16 kern :info : [ 1.762825] yenta_cardbus 0000:15:00.0: Socket status: 30000006 kern :info : [ 1.762834] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x5000-0x8fff] kern :info : [ 1.762841] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff] kern :info : [ 1.762848] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff: kern :notice: [ 1.762855] excluding 0xf4800000-0xf4b7ffff kern :info : [ 1.762866] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref] kern :info : [ 1.762872] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff: kern :notice: [ 1.762880] excluding 0xf0000000-0xf3ffffff kern :info : [ 1.763307] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver kern :info : [ 1.763321] ehci-pci: EHCI PCI platform driver kern :info : [ 1.763441] ehci-pci 0000:00:1a.7: EHCI Host Controller kern :info : [ 1.763508] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 kern :info : [ 1.763528] ehci-pci 0000:00:1a.7: debug port 1 kern :debug : [ 1.767443] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported kern :info : [ 1.767461] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfc325c00 kern :info : [ 1.773100] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 kern :info : [ 1.773175] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 kern :info : [ 1.773187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kern :info : [ 1.773198] usb usb1: Product: EHCI Host Controller kern :info : [ 1.773209] usb usb1: Manufacturer: Linux 3.16.3-gentoo ehci_hcd kern :info : [ 1.773220] usb usb1: SerialNumber: 0000:00:1a.7 kern :info : [ 1.773403] hub 1-0:1.0: USB hub found kern :info : [ 1.773415] hub 1-0:1.0: 6 ports detected kern :info : [ 1.773694] ehci-pci 0000:00:1d.7: EHCI Host Controller kern :info : [ 1.773776] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 kern :info : [ 1.773798] ehci-pci 0000:00:1d.7: debug port 1 kern :debug : [ 1.777698] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported kern :info : [ 1.777710] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfc326000 kern :info : [ 1.784107] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 kern :info : [ 1.784153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 kern :info : [ 1.784166] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kern :info : [ 1.784177] usb usb2: Product: EHCI Host Controller kern :info : [ 1.784188] usb usb2: Manufacturer: Linux 3.16.3-gentoo ehci_hcd kern :info : [ 1.784199] usb usb2: SerialNumber: 0000:00:1d.7 kern :info : [ 1.784370] hub 2-0:1.0: USB hub found kern :info : [ 1.784380] hub 2-0:1.0: 6 ports detected kern :info : [ 1.784599] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver kern :info : [ 1.784615] ohci-pci: OHCI PCI platform driver kern :info : [ 1.784635] uhci_hcd: USB Universal Host Controller Interface driver kern :info : [ 1.784711] uhci_hcd 0000:00:1a.0: UHCI Host Controller kern :info : [ 1.784788] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 kern :info : [ 1.784836] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001840 kern :info : [ 1.784879] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 kern :info : [ 1.784886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kern :info : [ 1.784893] usb usb3: Product: UHCI Host Controller kern :info : [ 1.784899] usb usb3: Manufacturer: Linux 3.16.3-gentoo uhci_hcd kern :info : [ 1.784905] usb usb3: SerialNumber: 0000:00:1a.0 kern :info : [ 1.785049] hub 3-0:1.0: USB hub found kern :info : [ 1.785063] hub 3-0:1.0: 2 ports detected kern :info : [ 1.785222] uhci_hcd 0000:00:1a.1: UHCI Host Controller kern :info : [ 1.785273] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 kern :info : [ 1.785314] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860 kern :info : [ 1.785362] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 kern :info : [ 1.785369] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kern :info : [ 1.785375] usb usb4: Product: UHCI Host Controller kern :info : [ 1.785381] usb usb4: Manufacturer: Linux 3.16.3-gentoo uhci_hcd kern :info : [ 1.785387] usb usb4: SerialNumber: 0000:00:1a.1 kern :info : [ 1.785527] hub 4-0:1.0: USB hub found kern :info : [ 1.785537] hub 4-0:1.0: 2 ports detected kern :info : [ 1.785702] uhci_hcd 0000:00:1a.2: UHCI Host Controller kern :info : [ 1.785750] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 kern :info : [ 1.785793] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001880 kern :info : [ 1.785842] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 kern :info : [ 1.785848] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kern :info : [ 1.785854] usb usb5: Product: UHCI Host Controller kern :info : [ 1.785860] usb usb5: Manufacturer: Linux 3.16.3-gentoo uhci_hcd kern :info : [ 1.785866] usb usb5: SerialNumber: 0000:00:1a.2 kern :info : [ 1.786018] hub 5-0:1.0: USB hub found kern :info : [ 1.786029] hub 5-0:1.0: 2 ports detected kern :info : [ 1.786190] uhci_hcd 0000:00:1d.0: UHCI Host Controller kern :info : [ 1.786235] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 kern :info : [ 1.786269] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 kern :info : [ 1.786310] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 kern :info : [ 1.786317] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kern :info : [ 1.786323] usb usb6: Product: UHCI Host Controller kern :info : [ 1.786329] usb usb6: Manufacturer: Linux 3.16.3-gentoo uhci_hcd kern :info : [ 1.786336] usb usb6: SerialNumber: 0000:00:1d.0 kern :info : [ 1.786468] hub 6-0:1.0: USB hub found kern :info : [ 1.786481] hub 6-0:1.0: 2 ports detected kern :info : [ 1.786640] uhci_hcd 0000:00:1d.1: UHCI Host Controller kern :info : [ 1.786697] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 kern :info : [ 1.786729] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 kern :info : [ 1.786778] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 kern :info : [ 1.786784] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kern :info : [ 1.786790] usb usb7: Product: UHCI Host Controller kern :info : [ 1.786796] usb usb7: Manufacturer: Linux 3.16.3-gentoo uhci_hcd kern :info : [ 1.786802] usb usb7: SerialNumber: 0000:00:1d.1 kern :info : [ 1.786934] hub 7-0:1.0: USB hub found kern :info : [ 1.786944] hub 7-0:1.0: 2 ports detected kern :info : [ 1.787107] uhci_hcd 0000:00:1d.2: UHCI Host Controller kern :info : [ 1.787165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 kern :info : [ 1.787206] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 kern :info : [ 1.787250] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 kern :info : [ 1.787257] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kern :info : [ 1.787263] usb usb8: Product: UHCI Host Controller kern :info : [ 1.787269] usb usb8: Manufacturer: Linux 3.16.3-gentoo uhci_hcd kern :info : [ 1.787275] usb usb8: SerialNumber: 0000:00:1d.2 kern :info : [ 1.787389] hub 8-0:1.0: USB hub found kern :info : [ 1.787400] hub 8-0:1.0: 2 ports detected kern :info : [ 1.787545] usbcore: registered new interface driver cdc_acm kern :info : [ 1.787551] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters kern :info : [ 1.787571] usbcore: registered new interface driver usblp kern :info : [ 1.787590] usbcore: registered new interface driver cdc_wdm kern :info : [ 1.787631] usbcore: registered new interface driver usb-storage kern :info : [ 1.787679] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 kern :info : [ 1.795337] serio: i8042 KBD port at 0x60,0x64 irq 1 kern :info : [ 1.795352] serio: i8042 AUX port at 0x60,0x64 irq 12 kern :info : [ 1.795511] mousedev: PS/2 mouse device common for all mice kern :info : [ 1.795783] input: PC Speaker as /devices/platform/pcspkr/input/input5 kern :info : [ 1.795878] rtc_cmos 00:02: RTC can wake from S4 kern :info : [ 1.796057] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 kern :info : [ 1.796090] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs kern :info : [ 1.796105] i2c /dev entries driver kern :info : [ 1.796507] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt kern :info : [ 1.796747] IR NEC protocol handler initialized kern :info : [ 1.796755] IR RC5(x) protocol handler initialized kern :info : [ 1.796762] IR RC6 protocol handler initialized kern :info : [ 1.796769] IR JVC protocol handler initialized kern :info : [ 1.796775] IR Sony protocol handler initialized kern :info : [ 1.796782] IR RC5 (streamzap) protocol handler initialized kern :info : [ 1.796789] IR SANYO protocol handler initialized kern :info : [ 1.796796] IR Sharp protocol handler initialized kern :info : [ 1.796803] IR MCE Keyboard/mouse protocol handler initialized kern :info : [ 1.796924] sdhci: Secure Digital Host Controller Interface driver kern :info : [ 1.796930] sdhci: Copyright(c) Pierre Ossman kern :info : [ 1.796950] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) kern :warn : [ 1.798019] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :info : [ 1.798030] mmc0: no vqmmc regulator found kern :info : [ 1.798036] mmc0: no vmmc regulator found kern :warn : [ 1.799046] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :info : [ 1.799147] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA kern :info : [ 1.799178] sdhci-pltfm: SDHCI platform and OF driver helper kern :info : [ 1.799378] r592: driver successfully loaded kern :info : [ 1.799424] hidraw: raw HID events driver (C) Jiri Kosina kern :info : [ 1.799508] usbcore: registered new interface driver usbhid kern :info : [ 1.799514] usbhid: USB HID core driver kern :info : [ 1.819588] thinkpad_acpi: ThinkPad ACPI Extras v0.25 kern :info : [ 1.819595] thinkpad_acpi: http://ibm-acpi.sf.net/ kern :info : [ 1.819601] thinkpad_acpi: ThinkPad BIOS 7VET80WW (3.10 ), EC 7VHT12WW-1.01 kern :info : [ 1.819607] thinkpad_acpi: Lenovo ThinkPad T500, model 2082BSG kern :info : [ 1.840540] thinkpad_acpi: detected a 16-level brightness capable ThinkPad kern :info : [ 1.840713] thinkpad_acpi: radio switch found; radios are enabled kern :info : [ 1.840730] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver kern :notice: [ 1.840736] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... kern :info : [ 1.842685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 kern :info : [ 1.843267] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked kern :info : [ 1.845882] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked kern :info : [ 1.848285] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one kern :info : [ 1.848406] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) kern :info : [ 1.849324] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 kern :err : [ 1.849447] intel_oaktrail: Platform not recognized (You could try the module's force-parameter) kern :err : [ 1.849555] intel_rapl: driver does not support CPU family 6 model 23 kern :info : [ 1.850565] GACT probability on kern :info : [ 1.850582] u32 classifier kern :info : [ 1.850588] Actions configured kern :info : [ 1.850602] Netfilter messages via NETLINK v0.30. kern :info : [ 1.850611] nfnl_acct: registering with nfnetlink. kern :debug : [ 1.852215] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X kern :info : [ 1.852276] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) kern :info : [ 1.852390] ctnetlink v0.93: registering with nfnetlink. kern :info : [ 1.852445] nf_tables: (c) 2007-2009 Patrick McHardy kern :info : [ 1.852454] nf_tables_compat: (c) 2012 Pablo Neira Ayuso kern :info : [ 1.852560] ipip: IPv4 over IPv4 tunneling driver kern :info : [ 1.853755] ip_tables: (C) 2000-2006 Netfilter Core Team kern :info : [ 1.853846] TCP: cubic registered kern :info : [ 1.853853] Initializing XFRM netlink socket kern :info : [ 1.854479] NET: Registered protocol family 10 kern :info : [ 1.854810] ip6_tables: (C) 2000-2006 Netfilter Core Team kern :info : [ 1.856519] sit: IPv6 over IPv4 tunneling driver kern :info : [ 1.856632] NET: Registered protocol family 17 kern :info : [ 1.856644] NET: Registered protocol family 15 kern :notice: [ 1.856780] Bridge firewalling registered kern :notice: [ 1.856807] Key type dns_resolver registered kern :notice: [ 1.857091] Loading compiled-in X.509 certificates kern :info : [ 1.857104] registered taskstats version 1 kern :info : [ 1.857613] console [netcon0] enabled kern :info : [ 1.857619] netconsole: network logging started kern :info : [ 1.860967] sound hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing. kern :info : [ 1.861061] ALSA device list: kern :info : [ 1.861069] #29: ThinkPad Console Audio Control at EC reg 0x30, fw 7VHT12WW-1.01 kern :info : [ 1.861414] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker kern :info : [ 1.861421] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) kern :info : [ 1.861428] sound hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0) kern :info : [ 1.861434] sound hdaudioC0D0: mono: mono_out=0x0 kern :info : [ 1.861440] sound hdaudioC0D0: dig-out=0x1c/0x0 kern :info : [ 1.861446] sound hdaudioC0D0: inputs: kern :info : [ 1.861453] sound hdaudioC0D0: Mic=0x18 kern :info : [ 1.861459] sound hdaudioC0D0: Internal Mic=0x1d kern :info : [ 1.861465] sound hdaudioC0D0: Dock Mic=0x17 kern :info : [ 1.862500] sound hdaudioC0D0: Enable sync_write for stable communication kern :info : [ 1.862575] sound hdaudioC0D1: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line kern :info : [ 1.862582] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) kern :info : [ 1.862589] sound hdaudioC0D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) kern :info : [ 1.862595] sound hdaudioC0D1: mono: mono_out=0x0 kern :info : [ 1.862600] sound hdaudioC0D1: inputs: kern :info : [ 1.867915] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 kern :info : [ 1.868017] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 kern :info : [ 1.868084] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 kern :info : [ 1.868144] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 kern :info : [ 2.671363] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000, board id: 71, fw id: 434116 kern :info : [ 2.671397] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 kern :info : [ 2.683184] usb 1-5: new high-speed USB device number 4 using ehci-pci kern :info : [ 2.714203] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 kern :err : [ 2.719923] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240) kern :err : [ 2.720235] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240) kern :info : [ 2.733772] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) kern :info : [ 2.733787] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. kern :info : [ 2.745230] devtmpfs: mounted kern :info : [ 2.747103] Freeing unused kernel memory: 1068K (ffffffff8252a000 - ffffffff82635000) kern :info : [ 2.747114] Write protecting the kernel read-only data: 20480k kern :info : [ 2.750942] Freeing unused kernel memory: 992K (ffff880001b08000 - ffff880001c00000) kern :info : [ 2.754472] Freeing unused kernel memory: 1216K (ffff8800022d0000 - ffff880002400000) kern :info : [ 2.797398] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485 kern :info : [ 2.797411] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 kern :info : [ 2.797696] hub 1-5:1.0: USB hub found kern :info : [ 2.797768] hub 1-5:1.0: 4 ports detected kern :notice: [ 2.884676] random: nonblocking pool is initialized kern :info : [ 2.900079] usb 1-6: new high-speed USB device number 5 using ehci-pci kern :info : [ 3.019649] usb 1-6: New USB device found, idVendor=17ef, idProduct=4807 kern :info : [ 3.019662] usb 1-6: New USB device strings: Mfr=1, Product=0, SerialNumber=0 kern :info : [ 3.019674] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. kern :info : [ 3.202726] fbcondecor: switched decor state to 'off' on console 0 kern :info : [ 3.330067] usb 2-4: new high-speed USB device number 2 using ehci-pci kern :info : [ 3.339788] fbcondecor: console 0 using theme 'livedvd-12.0' kern :info : [ 3.384263] fbcondecor: switched decor state to 'on' on console 0 kern :info : [ 3.506783] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 kern :info : [ 3.509854] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kern :info : [ 3.512877] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device kern :info : [ 3.515919] usb 2-4: Manufacturer: Ericsson kern :info : [ 3.519000] usb 2-4: SerialNumber: 3541430256485280 kern :info : [ 3.545457] cdc_acm 2-4:1.1: ttyACM0: USB ACM device kern :info : [ 3.554371] cdc_acm 2-4:1.3: ttyACM1: USB ACM device kern :info : [ 3.563110] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device kern :info : [ 3.567235] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device kern :info : [ 3.573138] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 kern :info : [ 3.580782] cdc_acm 2-4:1.9: ttyACM2: USB ACM device kern :info : [ 3.791049] usb 4-1: new full-speed USB device number 2 using uhci_hcd daemon:info : [ 3.831670] systemd-udevd[1741]: starting version 215 kern :info : [ 3.949564] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810 kern :info : [ 3.949567] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 kern :info : [ 3.949569] usb 4-1: Product: Fingerprint Sensor kern :info : [ 4.158034] usb 4-2: new full-speed USB device number 3 using uhci_hcd kern :info : [ 4.317374] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 kern :info : [ 4.317379] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 kern :info : [ 4.317382] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II kern :info : [ 4.317385] usb 4-2: Manufacturer: Lenovo Computer Corp kern :info : [ 5.125256] Bluetooth: Core ver 2.19 kern :info : [ 5.125273] NET: Registered protocol family 31 kern :info : [ 5.125275] Bluetooth: HCI device and connection manager initialized kern :info : [ 5.125284] Bluetooth: HCI socket layer initialized kern :info : [ 5.125286] Bluetooth: L2CAP socket layer initialized kern :info : [ 5.125292] Bluetooth: SCO socket layer initialized kern :info : [ 5.156762] usbcore: registered new interface driver btusb kern :info : [ 5.411317] uvcvideo: Found UVC 1.00 device (17ef:4807) kern :info : [ 5.412744] input: UVC Camera (17ef:4807) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input14 kern :info : [ 5.412901] usbcore: registered new interface driver uvcvideo kern :info : [ 5.412903] USB Video Class driver (1.1.1) kern :info : [ 5.606226] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com kern :info : [ 5.628825] fbcondecor: switched decor state to 'off' on console 0 kern :info : [ 5.732514] fbcondecor: console 0 using theme 'livedvd-12.0' kern :info : [ 5.778248] fbcondecor: switched decor state to 'on' on console 0 kern :info : [ 6.044388] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 kern :info : [ 7.202900] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 kern :info : [ 7.440884] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13 kern :info : [ 15.203690] EXT4-fs (sda3): re-mounted. Opts: discard kern :info : [ 15.331140] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k SSFS kern :info : [ 15.358564] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard kern :notice: [ 15.361088] XFS (sda6): Mounting V4 Filesystem kern :info : [ 15.406948] XFS (sda6): Ending clean mount kern :notice: [ 15.425441] XFS (dm-0): Mounting V4 Filesystem kern :info : [ 15.485978] XFS (dm-0): Ending clean mount kern :info : [ 15.977126] fbcondecor: switched decor state to 'off' on console 0 kern :info : [ 16.076460] fbcondecor: console 0 using theme 'livedvd-12.0' kern :info : [ 16.121620] fbcondecor: switched decor state to 'on' on console 0 kern :debug : [ 17.194471] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X kern :debug : [ 17.295891] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X kern :info : [ 17.296088] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [ 19.484027] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [ 19.484197] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [ 242.924070] thinkpad_ec: thinkpad_ec 0.41 loaded. kern :info : [ 242.924657] tp_smapi 0.41 loading... kern :info : [ 242.924833] tp_smapi successfully loaded (smapi_port=0xb2). kern :info : [ 242.929937] hdaps: LENOVO ThinkPad T500 detected, setting orientation 1 kern :debug : [ 242.930025] hdaps: initial mode latch is 0x05 kern :debug : [ 242.930202] hdaps: setting ec_rate=250, filter_order=2 kern :info : [ 242.930423] hdaps: device successfully initialized. kern :info : [ 242.930493] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input15 kern :info : [ 242.930761] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input16 kern :info : [ 242.931350] hdaps: driver successfully loaded. kern :info : [ 243.534995] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. kern :info : [ 246.236986] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [ 1075.453869] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [ 1075.454107] usb 4-2: USB disconnect, device number 3 kern :info : [ 1075.457039] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [ 1075.590019] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [ 1075.593505] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [ 1075.618068] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [ 1075.936541] cfg80211: Calling CRDA to update world regulatory domain kern :info : [ 1075.945448] cfg80211: World regulatory domain updated: kern :info : [ 1075.945451] cfg80211: DFS Master region: unset kern :info : [ 1075.945452] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) kern :info : [ 1075.945454] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [ 1075.945456] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [ 1075.945457] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [ 1075.945459] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [ 1075.945460] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [ 1117.986580] wlan0: authenticate with c0:25:06:47:03:83 kern :info : [ 1117.990249] wlan0: send auth to c0:25:06:47:03:83 (try 1/3) kern :info : [ 1117.992570] wlan0: authenticated kern :info : [ 1117.993047] wlan0: associate with c0:25:06:47:03:83 (try 1/3) kern :info : [ 1118.018895] wlan0: RX AssocResp from c0:25:06:47:03:83 (capab=0x431 status=0 aid=1) kern :info : [ 1118.027690] wlan0: associated kern :info : [ 1118.027735] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready kern :info : [ 1118.027851] cfg80211: Calling CRDA for country: DE kern :info : [ 1118.033325] cfg80211: Regulatory domain changed to country: DE kern :info : [ 1118.033332] cfg80211: DFS Master region: unset kern :info : [ 1118.033337] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) kern :info : [ 1118.033344] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) kern :info : [ 1118.033350] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) kern :info : [ 1118.033355] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) kern :info : [ 1118.033361] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s) kern :info : [ 1118.033366] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) kern :warn : [ 1148.336252] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [ 1148.336293] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [ 1148.336448] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [ 1148.336495] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [ 1148.336499] ata1.00: configured for UDMA/133 kern :info : [ 1148.336506] ata1: EH complete kern :info : [ 1148.351958] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [ 1148.355926] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [ 1157.113161] traps: notification-da[6784] trap int3 ip:7fde6099d84e sp:7fff418394b0 error:0 kern :warn : [ 1858.707112] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 kern :warn : [ 4652.336525] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [ 4652.336557] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [ 4652.336566] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [ 4652.336578] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [ 4652.336590] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [ 4652.336601] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [ 4652.336627] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [ 4652.336633] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [ 4652.336647] i915 0000:00:02.0: no hotplug settings from platform kern :info : [ 4652.336652] i915 0000:00:02.0: using default PCI settings kern :warn : [ 4652.336665] pci 0000:00:02.1: no hotplug settings from platform kern :info : [ 4652.336670] pci 0000:00:02.1: using default PCI settings kern :warn : [ 4652.336683] pci 0000:00:03.0: no hotplug settings from platform kern :info : [ 4652.336687] pci 0000:00:03.0: using default PCI settings kern :warn : [ 4652.336701] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [ 4652.336706] e1000e 0000:00:19.0: using default PCI settings kern :warn : [ 4652.336723] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [ 4652.336728] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [ 4652.336745] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [ 4652.336749] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [ 4652.336766] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [ 4652.336771] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [ 4652.336787] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [ 4652.336792] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [ 4652.336809] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [ 4652.336818] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [ 4652.336827] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [ 4652.336847] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [ 4652.336856] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [ 4652.336873] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [ 4652.336882] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [ 4652.336890] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [ 4652.336899] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [ 4652.336903] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [ 4652.336920] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [ 4652.336925] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [ 4652.336941] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [ 4652.336946] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [ 4652.336962] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [ 4652.336967] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [ 4652.336984] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [ 4652.336988] pci 0000:00:1e.0: using default PCI settings kern :warn : [ 4652.337041] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [ 4652.337047] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [ 4652.337069] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [ 4652.337075] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [ 4652.337096] r592 0000:15:00.4: no hotplug settings from platform kern :info : [ 4652.337101] r592 0000:15:00.4: using default PCI settings kern :warn : [ 4652.337122] pci 0000:15:00.5: no hotplug settings from platform kern :info : [ 4652.337126] pci 0000:15:00.5: using default PCI settings kern :warn : [ 4652.337152] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [ 4652.337163] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [ 4652.337188] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [ 4652.337199] ahci 0000:00:1f.2: using default PCI settings kern :warn : [ 4652.337222] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [ 4652.337231] i801_smbus 0000:00:1f.3: using default PCI settings kern :warn : [ 7218.484498] perf interrupt took too long (5010 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 kern :info : [16314.106676] traps: notification-da[7031] trap int3 ip:7f1e397eb84e sp:7fff39b8f5c0 error:0 kern :warn : [50014.755517] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [50014.755549] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [50014.755558] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [50014.755570] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [50014.755583] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [50014.755594] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [50014.755619] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [50014.755625] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [50014.755639] i915 0000:00:02.0: no hotplug settings from platform kern :info : [50014.755644] i915 0000:00:02.0: using default PCI settings kern :warn : [50014.755657] pci 0000:00:02.1: no hotplug settings from platform kern :info : [50014.755663] pci 0000:00:02.1: using default PCI settings kern :warn : [50014.755676] pci 0000:00:03.0: no hotplug settings from platform kern :info : [50014.755681] pci 0000:00:03.0: using default PCI settings kern :warn : [50014.755695] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [50014.755699] e1000e 0000:00:19.0: using default PCI settings kern :warn : [50014.755716] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [50014.755722] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [50014.755738] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [50014.755743] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [50014.755759] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [50014.755764] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [50014.755781] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [50014.755786] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [50014.755803] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [50014.755812] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [50014.755821] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [50014.755842] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [50014.755850] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [50014.755867] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [50014.755876] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [50014.755885] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [50014.755894] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [50014.755898] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [50014.755915] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [50014.755919] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [50014.755936] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [50014.755941] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [50014.755957] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [50014.755962] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [50014.755979] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [50014.755983] pci 0000:00:1e.0: using default PCI settings kern :warn : [50014.756042] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [50014.756048] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [50014.756070] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [50014.756075] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [50014.756100] r592 0000:15:00.4: no hotplug settings from platform kern :info : [50014.756104] r592 0000:15:00.4: using default PCI settings kern :warn : [50014.756127] pci 0000:15:00.5: no hotplug settings from platform kern :info : [50014.756138] pci 0000:15:00.5: using default PCI settings kern :warn : [50014.756162] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [50014.756172] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [50014.756197] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [50014.756210] ahci 0000:00:1f.2: using default PCI settings kern :warn : [50014.756234] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [50014.756243] i801_smbus 0000:00:1f.3: using default PCI settings kern :warn : [54234.679194] acpi PNP0401:00: Cannot transition to non-D0 state from D3 kern :info : [54234.679284] ACPI: \_SB_.GDCK: undocking kern :info : [54234.697295] usb 1-5: USB disconnect, device number 4 kern :info : [54235.553146] e1000e: eth0 NIC Link is Down kern :info : [54235.651190] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [54236.094254] thinkpad_acpi: EC reports that Thermal Table has changed kern :warn : [54236.094811] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [54236.094824] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [54236.094827] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [54236.094832] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [54236.094838] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [54236.094843] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [54236.094853] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [54236.094855] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [54236.094859] i915 0000:00:02.0: no hotplug settings from platform kern :info : [54236.094861] i915 0000:00:02.0: using default PCI settings kern :warn : [54236.094865] pci 0000:00:02.1: no hotplug settings from platform kern :info : [54236.094866] pci 0000:00:02.1: using default PCI settings kern :warn : [54236.094871] pci 0000:00:03.0: no hotplug settings from platform kern :info : [54236.094872] pci 0000:00:03.0: using default PCI settings kern :warn : [54236.094877] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [54236.094878] e1000e 0000:00:19.0: using default PCI settings kern :warn : [54236.094886] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [54236.094888] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [54236.094895] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [54236.094896] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [54236.094904] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [54236.094905] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [54236.094913] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [54236.094914] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [54236.094922] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [54236.094925] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [54236.094928] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [54236.094937] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [54236.094940] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [54236.094947] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [54236.094950] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [54236.094952] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [54236.094955] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [54236.094956] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [54236.094964] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [54236.094965] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [54236.094973] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [54236.094974] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [54236.094981] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [54236.094983] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [54236.094990] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [54236.094992] pci 0000:00:1e.0: using default PCI settings kern :warn : [54236.095016] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [54236.095017] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [54236.095028] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [54236.095029] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [54236.095040] r592 0000:15:00.4: no hotplug settings from platform kern :info : [54236.095041] r592 0000:15:00.4: using default PCI settings kern :warn : [54236.095051] pci 0000:15:00.5: no hotplug settings from platform kern :info : [54236.095052] pci 0000:15:00.5: using default PCI settings kern :warn : [54236.095062] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [54236.095063] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [54236.095073] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [54236.095074] ahci 0000:00:1f.2: using default PCI settings kern :warn : [54236.095082] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [54236.095083] i801_smbus 0000:00:1f.3: using default PCI settings kern :info : [54236.298476] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [54236.375802] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :warn : [54236.920752] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [54237.725744] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [54238.528419] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [54239.330455] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [54240.132620] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [54240.935172] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [54241.737625] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [54242.539456] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [54243.341858] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [54244.143277] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :info : [54244.329942] PM: Syncing filesystems ... done. kern :notice: [54244.374084] Freezing user space processes ... (elapsed 0.001 seconds) done. kern :notice: [54244.375616] Freezing remaining freezable tasks ... (elapsed 6.545 seconds) done. kern :notice: [54250.921169] Suspending console(s) (use no_console_suspend to debug) kern :debug : [54250.921622] hdaps: setting ec_rate=0, filter_order=1 kern :info : [54251.122720] wlan0: deauthenticating from c0:25:06:47:03:83 by local choice (Reason: 3=DEAUTH_LEAVING) kern :notice: [54251.123289] sd 0:0:0:0: [sda] Synchronizing SCSI cache kern :notice: [54251.124560] sd 0:0:0:0: [sda] Stopping disk kern :info : [54251.133444] parport_pc 00:06: disabled kern :info : [54251.133498] serial 00:05: disabled kern :info : [54251.133650] cfg80211: Calling CRDA to update world regulatory domain kern :info : [54251.133822] serial 00:05: System wakeup disabled by ACPI kern :info : [54251.481134] PM: suspend of devices complete after 559.597 msecs kern :info : [54251.492094] PM: late suspend of devices complete after 10.955 msecs kern :info : [54251.492761] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI kern :info : [54251.492839] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI kern :info : [54251.493031] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI kern :info : [54251.493057] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI kern :info : [54251.493127] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI kern :info : [54251.504028] PM: noirq suspend of devices complete after 11.931 msecs kern :info : [54251.504649] ACPI: Preparing to enter system sleep state S3 kern :info : [54251.508541] PM: Saving platform NVS memory kern :info : [54251.509528] Disabling non-boot CPUs ... kern :info : [54251.510694] kvm: disabling virtualization on CPU1 kern :info : [54251.510838] smpboot: CPU 1 is now offline kern :info : [54251.511101] ACPI: Low-level resume complete kern :info : [54251.511101] PM: Restoring platform NVS memory kern :info : [54251.511101] Enabling non-boot CPUs ... kern :info : [54251.511101] x86: Booting SMP configuration: kern :info : [54251.511101] smpboot: Booting Node 0 Processor 1 APIC 0x1 kern :info : [54251.510694] Disabled fast string operations kern :info : [54251.510694] kvm: enabling virtualization on CPU1 kern :info : [54251.527720] CPU1 is up kern :info : [54251.530559] ACPI: Waking up from system sleep state S3 kern :info : [54251.555414] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI kern :info : [54251.555492] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI kern :info : [54251.555876] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI kern :info : [54251.566095] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI kern :info : [54251.566152] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI kern :info : [54251.567525] PM: noirq resume of devices complete after 12.279 msecs kern :info : [54251.567763] PM: early resume of devices complete after 0.201 msecs kern :warn : [54251.594318] usb usb3: root hub lost power or was reset kern :warn : [54251.594398] usb usb4: root hub lost power or was reset kern :warn : [54251.594476] usb usb5: root hub lost power or was reset kern :debug : [54251.594618] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X kern :warn : [54251.594820] usb usb6: root hub lost power or was reset kern :warn : [54251.594898] usb usb7: root hub lost power or was reset kern :warn : [54251.594976] usb usb8: root hub lost power or was reset kern :warn : [54251.595137] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :warn : [54251.596180] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :notice: [54251.596982] sd 0:0:0:0: [sda] Starting disk kern :debug : [54251.647175] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :err : [54251.683106] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 (valid? 1) head 8163e50c tail 00000000 start 00042000 [expected 00042000] kern :err : [54251.683109] [drm:__i915_drm_thaw] *ERROR* failed to re-initialize GPU, declaring wedged! kern :err : [54251.695111] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add kern :err : [54251.695113] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 kern :err : [54251.695115] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add kern :err : [54251.695117] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00 kern :info : [54251.695432] serial 00:05: activated kern :info : [54251.695672] parport_pc 00:06: activated kern :info : [54251.711137] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [54251.714099] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [54251.901105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kern :info : [54251.901136] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) kern :debug : [54251.903522] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [54251.904197] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [54251.904199] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [54251.904202] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [54251.904375] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [54251.904472] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :debug : [54251.904562] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [54251.904565] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :debug : [54251.905818] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [54251.905820] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [54251.905821] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [54251.905993] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [54251.906078] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [54251.906082] ata1.00: configured for UDMA/133 kern :debug : [54251.908669] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [54251.909724] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [54251.909726] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :info : [54251.910766] ata2.00: configured for UDMA/100 kern :info : [54251.919122] usb 4-1: reset full-speed USB device number 2 using uhci_hcd kern :info : [54251.919124] usb 1-6: reset high-speed USB device number 5 using ehci-pci kern :debug : [54252.056016] hdaps: initial mode latch is 0x05 kern :debug : [54252.056146] hdaps: setting ec_rate=250, filter_order=2 kern :info : [54252.056372] PM: resume of devices complete after 488.606 msecs kern :notice: [54252.056660] Restarting tasks ... kern :info : [54252.061373] usb 2-4: USB disconnect, device number 2 kern :info : [54252.061806] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device kern :info : [54252.072478] cfg80211: World regulatory domain updated: kern :info : [54252.072481] cfg80211: DFS Master region: unset kern :info : [54252.072482] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) kern :info : [54252.072485] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [54252.072487] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [54252.072488] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [54252.072490] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [54252.072491] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :notice: [54252.084709] done. kern :info : [54252.106556] video LNXVIDEO:00: Restoring backlight state kern :notice: [54252.149038] firewire_core 0000:15:00.1: rediscovered device fw0 kern :info : [54252.684343] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [54252.867361] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :warn : [54252.895616] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [54252.895657] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [54252.895804] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [54252.895840] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [54252.895843] ata1.00: configured for UDMA/133 kern :info : [54252.895852] ata1: EH complete kern :notice: [54252.935985] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA kern :info : [54255.155131] usb 6-2: new full-speed USB device number 2 using uhci_hcd kern :info : [54255.303151] usb 6-2: New USB device found, idVendor=067b, idProduct=2303 kern :info : [54255.303155] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 kern :info : [54255.303159] usb 6-2: Product: USB-Serial Controller kern :info : [54255.303161] usb 6-2: Manufacturer: Prolific Technology Inc. kern :info : [54255.503909] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [54255.507705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [54255.546288] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [54255.556262] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :info : [54255.715120] usbcore: registered new interface driver usbserial kern :info : [54255.715134] usbcore: registered new interface driver usbserial_generic kern :info : [54255.715144] usbserial: USB Serial support registered for generic kern :info : [54255.716124] usbcore: registered new interface driver pl2303 kern :info : [54255.716135] usbserial: USB Serial support registered for pl2303 kern :info : [54255.716154] pl2303 6-2:1.0: pl2303 converter detected kern :info : [54255.729244] usb 6-2: pl2303 converter now attached to ttyUSB0 kern :info : [54256.473923] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [54256.474034] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [54256.474076] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [54256.595099] usb 2-4: new high-speed USB device number 4 using ehci-pci kern :info : [54257.516915] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 kern :info : [54257.516921] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kern :info : [54257.516924] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device kern :info : [54257.516927] usb 2-4: Manufacturer: Ericsson kern :info : [54257.516930] usb 2-4: SerialNumber: 3541430256485280 kern :info : [54257.525021] cdc_acm 2-4:1.1: ttyACM0: USB ACM device kern :info : [54257.556264] cdc_acm 2-4:1.3: ttyACM1: USB ACM device kern :info : [54257.570096] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device kern :info : [54257.577235] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device kern :info : [54257.594396] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 kern :info : [54257.603762] cdc_acm 2-4:1.9: ttyACM2: USB ACM device kern :info : [54258.934440] thinkpad_acpi: EC reports that Thermal Table has changed kern :info : [54259.057503] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. kern :info : [54259.062664] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [54259.122600] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [54259.922793] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :warn : [54259.980329] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [54259.980448] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [54259.980601] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [54259.980648] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [54259.980651] ata1.00: configured for UDMA/133 kern :info : [54259.980659] ata1: EH complete kern :notice: [54259.980781] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern :info : [54259.988324] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [54259.993246] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [54260.703932] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [54260.704053] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [54260.704114] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [54304.737395] e1000e: eth0 NIC Link is Down kern :info : [54304.745861] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :debug : [54309.265625] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :debug : [54309.366147] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :info : [54309.366295] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [54309.369072] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [54309.372058] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [54309.395515] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [54310.884979] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [54310.885100] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [54310.885160] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [66127.680161] e1000e: eth0 NIC Link is Down kern :info : [66127.779382] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [66148.632112] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Link Status Change kern :info : [66150.338896] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [66150.339016] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [66150.339049] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :err : [67382.612204] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.614180] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.615180] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.616175] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.617162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.618165] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.619160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.620156] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.621151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.622152] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.623158] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.624173] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.625162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.626162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.627156] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.628166] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.629162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.630160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.631153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.632148] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.633160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.634149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.635164] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.636149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.637162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.638144] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.639149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.640149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.641161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.642160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.643162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.644158] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.645175] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.646162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.647143] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.648152] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.649162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.650151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.651150] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.652161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.653151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.654145] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.655161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.656157] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.657172] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.658161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.659173] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.660172] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.661176] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.662173] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.663171] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.664181] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.665163] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.666160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.667153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.668151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.669144] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.670149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.671138] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.672139] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.673145] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.674161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.675161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.676153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.677161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.678151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.679152] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.680144] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.681150] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.682164] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.683160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.684172] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.685150] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.686154] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.687149] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.688147] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.689167] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.690175] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.691161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.692165] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.693172] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.694161] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.695163] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.696162] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.697151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.698153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.699160] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.700152] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.701151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.702159] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.703151] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.704024] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.704168] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :info : [67382.704263] usb 6-2: USB disconnect, device number 2 kern :err : [67382.705153] pl2303 ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -84 kern :err : [67382.705161] pl2303 ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -19 kern :err : [67382.705226] pl2303 ttyUSB0: pl2303_set_control_lines - failed: -19 kern :info : [67382.705445] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 kern :info : [67382.705467] pl2303 6-2:1.0: device disconnected kern :info : [67930.762147] e1000e: eth0 NIC Link is Down kern :info : [67930.861441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [67934.907102] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Link Status Change kern :info : [67937.491894] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [67937.492021] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [67937.492069] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [74702.112161] traps: notification-da[20524] trap int3 ip:7f9aafef884e sp:7fff10edd930 error:0 kern :info : [79767.021799] conftest[29498]: segfault at ff803f6c ip 00000000f771fdfd sp 00000000ff803f40 error 6 in ld-2.19.so[f770a000+20000] kern :info : [80943.265361] thinkpad_acpi: EC reports that Thermal Table has changed kern :info : [80944.444563] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [80944.675544] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [80944.769082] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :warn : [80945.500761] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [80945.500898] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [80945.501048] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [80945.501088] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [80945.501092] ata1.00: configured for UDMA/133 kern :info : [80945.501101] ata1: EH complete kern :notice: [80945.501219] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA kern :info : [80945.509911] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [80945.520763] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :info : [80945.855971] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [80945.856082] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [80945.856118] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [80946.901134] e1000e: eth0 NIC Link is Down kern :info : [80947.067555] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [80947.237095] e1000e 0000:00:19.0 eth0: MAC Wakeup cause - Link Status Change kern :info : [80953.681049] PM: Syncing filesystems ... done. kern :notice: [80953.873618] Freezing user space processes ... (elapsed 0.023 seconds) done. kern :notice: [80953.897551] Freezing remaining freezable tasks ... (elapsed 2.579 seconds) done. kern :notice: [80956.476982] Suspending console(s) (use no_console_suspend to debug) kern :debug : [80956.477535] hdaps: setting ec_rate=0, filter_order=1 kern :notice: [80956.681491] sd 0:0:0:0: [sda] Stopping disk kern :info : [80956.681950] parport_pc 00:06: disabled kern :info : [80956.682016] serial 00:05: disabled kern :info : [80956.682439] serial 00:05: System wakeup disabled by ACPI kern :info : [80957.454140] PM: suspend of devices complete after 976.746 msecs kern :info : [80957.465106] PM: late suspend of devices complete after 10.962 msecs kern :info : [80957.465774] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI kern :info : [80957.465863] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI kern :info : [80957.466105] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI kern :info : [80957.466179] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI kern :info : [80957.466230] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI kern :info : [80957.477036] PM: noirq suspend of devices complete after 11.927 msecs kern :info : [80957.477663] ACPI: Preparing to enter system sleep state S3 kern :info : [80957.481681] PM: Saving platform NVS memory kern :info : [80957.482655] Disabling non-boot CPUs ... kern :info : [80957.483822] kvm: disabling virtualization on CPU1 kern :info : [80957.483966] smpboot: CPU 1 is now offline kern :info : [80957.484213] ACPI: Low-level resume complete kern :info : [80957.484213] PM: Restoring platform NVS memory kern :info : [80957.484213] Enabling non-boot CPUs ... kern :info : [80957.484213] x86: Booting SMP configuration: kern :info : [80957.484213] smpboot: Booting Node 0 Processor 1 APIC 0x1 kern :info : [80957.483822] Disabled fast string operations kern :info : [80957.483822] kvm: enabling virtualization on CPU1 kern :info : [80957.504353] CPU1 is up kern :info : [80957.507211] ACPI: Waking up from system sleep state S3 kern :info : [80957.528245] thinkpad_acpi: EC reports that Thermal Table has changed kern :info : [80957.533957] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI kern :info : [80957.534036] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI kern :info : [80957.534437] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI kern :info : [80957.546113] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI kern :info : [80957.546197] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI kern :info : [80957.546677] PM: noirq resume of devices complete after 12.869 msecs kern :info : [80957.546888] PM: early resume of devices complete after 0.175 msecs kern :warn : [80957.549132] usb usb5: root hub lost power or was reset kern :warn : [80957.549316] usb usb4: root hub lost power or was reset kern :warn : [80957.549394] usb usb3: root hub lost power or was reset kern :debug : [80957.549571] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X kern :warn : [80957.549861] usb usb6: root hub lost power or was reset kern :warn : [80957.550386] usb usb7: root hub lost power or was reset kern :warn : [80957.550465] usb usb8: root hub lost power or was reset kern :warn : [80957.550624] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :warn : [80957.551670] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :notice: [80957.552505] sd 0:0:0:0: [sda] Starting disk kern :debug : [80957.622212] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :err : [80957.650069] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add kern :err : [80957.650071] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 kern :err : [80957.650080] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add kern :err : [80957.650083] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00 kern :info : [80957.650382] serial 00:05: activated kern :info : [80957.650614] parport_pc 00:06: activated kern :info : [80957.650755] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [80957.653727] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [80957.856073] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) kern :info : [80957.856103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kern :debug : [80957.858571] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [80957.859135] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [80957.859138] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [80957.859140] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [80957.859342] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [80957.859449] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :debug : [80957.859708] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [80957.859710] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :debug : [80957.860804] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [80957.860806] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [80957.860808] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [80957.860994] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [80957.861094] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [80957.861097] ata1.00: configured for UDMA/133 kern :debug : [80957.863744] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [80957.864771] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [80957.864773] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :info : [80957.865770] ata2.00: configured for UDMA/100 kern :info : [80957.867063] usb 4-1: reset full-speed USB device number 2 using uhci_hcd kern :info : [80957.867067] usb 1-6: reset high-speed USB device number 5 using ehci-pci kern :notice: [80957.872262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern :debug : [80958.010071] hdaps: initial mode latch is 0x05 kern :debug : [80958.010214] hdaps: setting ec_rate=250, filter_order=2 kern :info : [80958.010442] PM: resume of devices complete after 463.550 msecs kern :notice: [80958.010645] Restarting tasks ... kern :info : [80958.010669] ACPI: \_SB_.GDCK: docking kern :info : [80958.026265] usb 2-4: USB disconnect, device number 4 kern :info : [80958.030660] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device kern :notice: [80958.039154] done. kern :info : [80958.068889] video LNXVIDEO:00: Restoring backlight state kern :notice: [80958.104034] firewire_core 0000:15:00.1: rediscovered device fw0 kern :info : [80958.243062] usb 1-5: new high-speed USB device number 6 using ehci-pci kern :info : [80958.357313] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485 kern :info : [80958.357317] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 kern :info : [80958.357588] hub 1-5:1.0: USB hub found kern :info : [80958.357682] hub 1-5:1.0: 4 ports detected kern :info : [80958.727849] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. kern :info : [80958.767047] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [80958.889314] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :warn : [80960.445382] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [80960.445424] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [80960.445571] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [80960.445614] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [80960.445617] ata1.00: configured for UDMA/133 kern :info : [80960.445625] ata1: EH complete kern :info : [80960.456641] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [80960.461061] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [80960.947895] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [80960.948045] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [80962.593033] usb 2-4: new high-speed USB device number 5 using ehci-pci kern :info : [80963.503565] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 kern :info : [80963.503569] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kern :info : [80963.503571] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device kern :info : [80963.503573] usb 2-4: Manufacturer: Ericsson kern :info : [80963.503574] usb 2-4: SerialNumber: 3541430256485280 kern :info : [80963.516084] cdc_acm 2-4:1.1: ttyACM0: USB ACM device kern :info : [80963.536457] cdc_acm 2-4:1.3: ttyACM1: USB ACM device kern :info : [80963.547289] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device kern :info : [80963.553951] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device kern :info : [80963.560128] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 kern :info : [80963.569820] cdc_acm 2-4:1.9: ttyACM2: USB ACM device kern :info : [81029.484135] e1000e: eth0 NIC Link is Down kern :debug : [81033.592237] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :debug : [81033.693073] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :info : [81033.693218] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [81033.695722] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [81033.698965] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [81033.726610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [81035.883894] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [81035.884050] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [81043.005729] wlan0: authenticate with c0:25:06:47:03:83 kern :info : [81043.008582] wlan0: send auth to c0:25:06:47:03:83 (try 1/3) kern :info : [81043.013542] wlan0: authenticated kern :info : [81043.014272] wlan0: associate with c0:25:06:47:03:83 (try 1/3) kern :info : [81043.032681] wlan0: RX AssocResp from c0:25:06:47:03:83 (capab=0x431 status=0 aid=1) kern :info : [81043.040201] wlan0: associated kern :info : [81043.040240] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready kern :info : [81043.040299] cfg80211: Calling CRDA for country: DE kern :info : [81043.045746] cfg80211: Regulatory domain changed to country: DE kern :info : [81043.045750] cfg80211: DFS Master region: unset kern :info : [81043.045751] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) kern :info : [81043.045754] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) kern :info : [81043.045756] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) kern :info : [81043.045757] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) kern :info : [81043.045759] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s) kern :info : [81043.045760] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) kern :info : [144263.112148] traps: notification-da[7267] trap int3 ip:7f718e47e84e sp:7fff3b66fa90 error:0 kern :info : [148002.064079] traps: notification-da[7647] trap int3 ip:7f7bf128984e sp:7ffff8a835f0 error:0 kern :info : [150453.113049] traps: notification-da[7878] trap int3 ip:7f73b597384e sp:7ffff5841630 error:0 kern :warn : [187701.407482] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [187701.407516] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [187701.407524] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [187701.407536] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [187701.407548] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [187701.407560] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [187701.407586] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [187701.407592] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [187701.407606] i915 0000:00:02.0: no hotplug settings from platform kern :info : [187701.407611] i915 0000:00:02.0: using default PCI settings kern :warn : [187701.407625] pci 0000:00:02.1: no hotplug settings from platform kern :info : [187701.407630] pci 0000:00:02.1: using default PCI settings kern :warn : [187701.407643] pci 0000:00:03.0: no hotplug settings from platform kern :info : [187701.407648] pci 0000:00:03.0: using default PCI settings kern :warn : [187701.407663] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [187701.407668] e1000e 0000:00:19.0: using default PCI settings kern :warn : [187701.407684] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [187701.407690] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [187701.407706] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [187701.407711] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [187701.407728] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [187701.407733] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [187701.407750] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [187701.407755] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [187701.407772] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [187701.407781] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [187701.407790] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [187701.407811] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [187701.407820] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [187701.407837] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [187701.407846] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [187701.407854] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [187701.407863] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [187701.407868] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [187701.407885] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [187701.407889] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [187701.407906] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [187701.407911] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [187701.407927] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [187701.407932] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [187701.407948] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [187701.407953] pci 0000:00:1e.0: using default PCI settings kern :warn : [187701.407981] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [187701.407985] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [187701.408037] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [187701.408043] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [187701.408066] r592 0000:15:00.4: no hotplug settings from platform kern :info : [187701.408071] r592 0000:15:00.4: using default PCI settings kern :warn : [187701.408095] pci 0000:15:00.5: no hotplug settings from platform kern :info : [187701.408100] pci 0000:15:00.5: using default PCI settings kern :warn : [187701.408120] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [187701.408130] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [187701.408158] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [187701.408171] ahci 0000:00:1f.2: using default PCI settings kern :warn : [187701.408196] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [187701.408207] i801_smbus 0000:00:1f.3: using default PCI settings kern :warn : [232007.371430] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [232007.371464] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [232007.371473] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [232007.371485] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [232007.371497] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [232007.371509] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [232007.371536] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [232007.371541] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [232007.371556] i915 0000:00:02.0: no hotplug settings from platform kern :info : [232007.371561] i915 0000:00:02.0: using default PCI settings kern :warn : [232007.371574] pci 0000:00:02.1: no hotplug settings from platform kern :info : [232007.371579] pci 0000:00:02.1: using default PCI settings kern :warn : [232007.371592] pci 0000:00:03.0: no hotplug settings from platform kern :info : [232007.371597] pci 0000:00:03.0: using default PCI settings kern :warn : [232007.371612] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [232007.371616] e1000e 0000:00:19.0: using default PCI settings kern :warn : [232007.371633] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [232007.371638] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [232007.371655] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [232007.371660] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [232007.371677] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [232007.371681] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [232007.371698] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [232007.371703] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [232007.371720] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [232007.371730] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [232007.371739] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [232007.371760] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [232007.371769] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [232007.371786] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [232007.371795] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [232007.371804] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [232007.371813] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [232007.371818] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [232007.371835] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [232007.371840] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [232007.371856] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [232007.371861] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [232007.371878] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [232007.371883] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [232007.371900] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [232007.371905] pci 0000:00:1e.0: using default PCI settings kern :warn : [232007.371932] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [232007.371937] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [232007.371958] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [232007.371963] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [232007.371984] r592 0000:15:00.4: no hotplug settings from platform kern :info : [232007.371989] r592 0000:15:00.4: using default PCI settings kern :warn : [232007.372037] pci 0000:15:00.5: no hotplug settings from platform kern :info : [232007.372043] pci 0000:15:00.5: using default PCI settings kern :warn : [232007.372063] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [232007.372067] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [232007.372087] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [232007.372092] ahci 0000:00:1f.2: using default PCI settings kern :warn : [232007.372110] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [232007.372114] i801_smbus 0000:00:1f.3: using default PCI settings kern :warn : [244656.599159] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [244656.599173] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [244656.599176] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [244656.599181] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [244656.599187] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [244656.599192] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [244656.599204] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [244656.599206] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [244656.599210] i915 0000:00:02.0: no hotplug settings from platform kern :info : [244656.599212] i915 0000:00:02.0: using default PCI settings kern :warn : [244656.599216] pci 0000:00:02.1: no hotplug settings from platform kern :info : [244656.599218] pci 0000:00:02.1: using default PCI settings kern :warn : [244656.599222] pci 0000:00:03.0: no hotplug settings from platform kern :info : [244656.599223] pci 0000:00:03.0: using default PCI settings kern :warn : [244656.599228] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [244656.599230] e1000e 0000:00:19.0: using default PCI settings kern :warn : [244656.599237] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [244656.599239] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [244656.599246] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [244656.599248] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [244656.599255] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [244656.599257] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [244656.599264] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [244656.599266] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [244656.599273] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [244656.599276] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [244656.599279] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [244656.599288] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [244656.599291] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [244656.599299] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [244656.599301] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [244656.599304] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [244656.599307] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [244656.599308] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [244656.599315] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [244656.599317] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [244656.599324] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [244656.599326] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [244656.599333] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [244656.599335] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [244656.599342] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [244656.599344] pci 0000:00:1e.0: using default PCI settings kern :warn : [244656.599357] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [244656.599358] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [244656.599368] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [244656.599370] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [244656.599380] r592 0000:15:00.4: no hotplug settings from platform kern :info : [244656.599382] r592 0000:15:00.4: using default PCI settings kern :warn : [244656.599392] pci 0000:15:00.5: no hotplug settings from platform kern :info : [244656.599393] pci 0000:15:00.5: using default PCI settings kern :warn : [244656.599403] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [244656.599404] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [244656.599414] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [244656.599415] ahci 0000:00:1f.2: using default PCI settings kern :warn : [244656.599423] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [244656.599424] i801_smbus 0000:00:1f.3: using default PCI settings kern :info : [245736.716159] usb 1-1: new high-speed USB device number 7 using ehci-pci kern :err : [245737.221111] usb 1-1: device not accepting address 7, error -32 kern :info : [245737.323183] usb 1-1: new high-speed USB device number 8 using ehci-pci kern :info : [245737.443285] usb 1-1: New USB device found, idVendor=1949, idProduct=0004 kern :info : [245737.443293] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kern :info : [245737.443300] usb 1-1: Product: Amazon Kindle kern :info : [245737.443305] usb 1-1: Manufacturer: Amazon kern :info : [245737.443310] usb 1-1: SerialNumber: 90D42201423308PR kern :info : [245737.451137] usb-storage 1-1:1.0: USB Mass Storage device detected kern :info : [245737.451389] scsi4 : usb-storage 1-1:1.0 kern :notice: [245738.453420] scsi 4:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2 kern :notice: [245738.454773] sd 4:0:0:0: Attached scsi generic sg2 type 0 kern :notice: [245738.462404] sd 4:0:0:0: [sdb] Attached SCSI removable disk kern :notice: [245744.615412] sd 4:0:0:0: [sdb] 2797568 512-byte logical blocks: (1.43 GB/1.33 GiB) kern :notice: [245744.829545] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern :info : [245745.052302] sdb: sdb1 kern :info : [245792.112467] traps: notification-da[18576] trap int3 ip:7f90d03ec84e sp:7fff2d5d01d0 error:0 kern :info : [245956.017575] sdb: detected capacity change from 1432354816 to 0 kern :warn : [273579.398479] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [273579.398511] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [273579.398520] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [273579.398532] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [273579.398544] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [273579.398556] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [273579.398581] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [273579.398587] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [273579.398602] i915 0000:00:02.0: no hotplug settings from platform kern :info : [273579.398607] i915 0000:00:02.0: using default PCI settings kern :warn : [273579.398621] pci 0000:00:02.1: no hotplug settings from platform kern :info : [273579.398626] pci 0000:00:02.1: using default PCI settings kern :warn : [273579.398639] pci 0000:00:03.0: no hotplug settings from platform kern :info : [273579.398644] pci 0000:00:03.0: using default PCI settings kern :warn : [273579.398658] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [273579.398663] e1000e 0000:00:19.0: using default PCI settings kern :warn : [273579.398680] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [273579.398685] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [273579.398702] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [273579.398707] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [273579.398723] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [273579.398728] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [273579.398745] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [273579.398750] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [273579.398767] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [273579.398777] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [273579.398786] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [273579.398806] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [273579.398815] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [273579.398832] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [273579.398841] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [273579.398850] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [273579.398859] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [273579.398864] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [273579.398880] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [273579.398885] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [273579.398902] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [273579.398907] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [273579.398923] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [273579.398928] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [273579.398945] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [273579.398950] pci 0000:00:1e.0: using default PCI settings kern :warn : [273579.398977] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [273579.398982] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [273579.399040] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [273579.399046] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [273579.399071] r592 0000:15:00.4: no hotplug settings from platform kern :info : [273579.399076] r592 0000:15:00.4: using default PCI settings kern :warn : [273579.399098] pci 0000:15:00.5: no hotplug settings from platform kern :info : [273579.399102] pci 0000:15:00.5: using default PCI settings kern :warn : [273579.399123] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [273579.399128] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [273579.399150] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [273579.399162] ahci 0000:00:1f.2: using default PCI settings kern :warn : [273579.399185] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [273579.399198] i801_smbus 0000:00:1f.3: using default PCI settings kern :warn : [299690.265498] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [299690.265532] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [299690.265542] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [299690.265555] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [299690.265567] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [299690.265580] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [299690.265608] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [299690.265614] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [299690.265628] i915 0000:00:02.0: no hotplug settings from platform kern :info : [299690.265633] i915 0000:00:02.0: using default PCI settings kern :warn : [299690.265647] pci 0000:00:02.1: no hotplug settings from platform kern :info : [299690.265652] pci 0000:00:02.1: using default PCI settings kern :warn : [299690.265665] pci 0000:00:03.0: no hotplug settings from platform kern :info : [299690.265670] pci 0000:00:03.0: using default PCI settings kern :warn : [299690.265685] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [299690.265690] e1000e 0000:00:19.0: using default PCI settings kern :warn : [299690.265707] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [299690.265712] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [299690.265729] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [299690.265734] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [299690.265750] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [299690.265755] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [299690.265772] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [299690.265777] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [299690.265794] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [299690.265803] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [299690.265812] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [299690.265833] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [299690.265842] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [299690.265861] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [299690.265869] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [299690.265879] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [299690.265889] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [299690.265894] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [299690.265912] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [299690.265917] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [299690.265934] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [299690.265939] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [299690.265955] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [299690.265960] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [299690.265978] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [299690.265982] pci 0000:00:1e.0: using default PCI settings kern :warn : [299690.266036] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [299690.266041] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [299690.266063] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [299690.266068] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [299690.266090] r592 0000:15:00.4: no hotplug settings from platform kern :info : [299690.266095] r592 0000:15:00.4: using default PCI settings kern :warn : [299690.266116] pci 0000:15:00.5: no hotplug settings from platform kern :info : [299690.266121] pci 0000:15:00.5: using default PCI settings kern :warn : [299690.266140] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [299690.266145] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [299690.266164] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [299690.266169] ahci 0000:00:1f.2: using default PCI settings kern :warn : [299690.266185] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [299690.266190] i801_smbus 0000:00:1f.3: using default PCI settings kern :info : [300539.533256] usb 1-1: USB disconnect, device number 8 kern :warn : [300553.869074] acpi PNP0401:00: Cannot transition to non-D0 state from D3 kern :info : [300553.869163] ACPI: \_SB_.GDCK: undocking kern :info : [300553.887263] usb 1-5: USB disconnect, device number 6 kern :info : [300555.012242] e1000e: eth0 NIC Link is Down kern :info : [300555.137068] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [300555.555348] thinkpad_acpi: EC reports that Thermal Table has changed kern :warn : [300555.555835] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [300555.555847] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [300555.555850] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [300555.555856] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [300555.555861] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [300555.555868] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [300555.555882] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [300555.555884] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [300555.555897] i915 0000:00:02.0: no hotplug settings from platform kern :info : [300555.555899] i915 0000:00:02.0: using default PCI settings kern :warn : [300555.555903] pci 0000:00:02.1: no hotplug settings from platform kern :info : [300555.555905] pci 0000:00:02.1: using default PCI settings kern :warn : [300555.555909] pci 0000:00:03.0: no hotplug settings from platform kern :info : [300555.555911] pci 0000:00:03.0: using default PCI settings kern :warn : [300555.555916] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [300555.555918] e1000e 0000:00:19.0: using default PCI settings kern :warn : [300555.555934] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [300555.555935] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [300555.555951] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [300555.555952] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [300555.555962] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [300555.555963] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [300555.555972] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [300555.555973] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [300555.555981] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [300555.555984] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [300555.555987] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [300555.555996] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [300555.555999] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [300555.556019] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [300555.556022] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [300555.556025] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [300555.556027] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [300555.556029] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [300555.556037] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [300555.556038] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [300555.556046] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [300555.556047] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [300555.556055] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [300555.556057] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [300555.556065] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [300555.556066] pci 0000:00:1e.0: using default PCI settings kern :warn : [300555.556080] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [300555.556082] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [300555.556093] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [300555.556094] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [300555.556105] r592 0000:15:00.4: no hotplug settings from platform kern :info : [300555.556106] r592 0000:15:00.4: using default PCI settings kern :warn : [300555.556116] pci 0000:15:00.5: no hotplug settings from platform kern :info : [300555.556118] pci 0000:15:00.5: using default PCI settings kern :warn : [300555.556128] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [300555.556130] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [300555.556141] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [300555.556142] ahci 0000:00:1f.2: using default PCI settings kern :warn : [300555.556151] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [300555.556152] i801_smbus 0000:00:1f.3: using default PCI settings kern :info : [300556.214032] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [300556.295166] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :warn : [300556.454980] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [300557.380786] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [300558.182034] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [300558.993666] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [300559.795870] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [300560.597640] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [300561.399758] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [300562.201538] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :info : [300562.891411] PM: Syncing filesystems ... done. kern :notice: [300562.961609] Freezing user space processes ... kern :warn : [300563.002951] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :notice: [300563.009234] (elapsed 0.047 seconds) done. kern :notice: [300563.009238] Freezing remaining freezable tasks ... (elapsed 5.698 seconds) done. kern :notice: [300568.707845] Suspending console(s) (use no_console_suspend to debug) kern :debug : [300568.708375] hdaps: setting ec_rate=0, filter_order=1 kern :info : [300568.905199] wlan0: deauthenticating from c0:25:06:47:03:83 by local choice (Reason: 3=DEAUTH_LEAVING) kern :notice: [300568.905942] sd 0:0:0:0: [sda] Synchronizing SCSI cache kern :notice: [300568.907201] sd 0:0:0:0: [sda] Stopping disk kern :info : [300568.911545] parport_pc 00:06: disabled kern :info : [300568.911600] serial 00:05: disabled kern :info : [300568.911818] cfg80211: Calling CRDA to update world regulatory domain kern :info : [300568.911872] serial 00:05: System wakeup disabled by ACPI kern :info : [300569.447157] PM: suspend of devices complete after 738.911 msecs kern :info : [300569.458108] PM: late suspend of devices complete after 10.946 msecs kern :info : [300569.458774] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI kern :info : [300569.458861] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI kern :info : [300569.459102] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI kern :info : [300569.459180] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI kern :info : [300569.459197] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI kern :info : [300569.470032] PM: noirq suspend of devices complete after 11.921 msecs kern :info : [300569.470645] ACPI: Preparing to enter system sleep state S3 kern :info : [300569.474490] PM: Saving platform NVS memory kern :info : [300569.475491] Disabling non-boot CPUs ... kern :info : [300569.476660] kvm: disabling virtualization on CPU1 kern :info : [300569.476803] smpboot: CPU 1 is now offline kern :info : [300569.477125] ACPI: Low-level resume complete kern :info : [300569.477125] PM: Restoring platform NVS memory kern :info : [300569.477125] Enabling non-boot CPUs ... kern :info : [300569.477125] x86: Booting SMP configuration: kern :info : [300569.477125] smpboot: Booting Node 0 Processor 1 APIC 0x1 kern :info : [300569.476660] Disabled fast string operations kern :info : [300569.476660] kvm: enabling virtualization on CPU1 kern :info : [300569.493829] CPU1 is up kern :info : [300569.496695] ACPI: Waking up from system sleep state S3 kern :info : [300569.521367] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI kern :info : [300569.521445] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI kern :info : [300569.521837] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI kern :info : [300569.532152] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI kern :info : [300569.532154] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI kern :info : [300569.534358] PM: noirq resume of devices complete after 13.190 msecs kern :info : [300569.534585] PM: early resume of devices complete after 0.191 msecs kern :warn : [300569.537161] usb usb3: root hub lost power or was reset kern :warn : [300569.537241] usb usb4: root hub lost power or was reset kern :warn : [300569.537324] usb usb5: root hub lost power or was reset kern :debug : [300569.537466] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X kern :warn : [300569.537714] usb usb6: root hub lost power or was reset kern :warn : [300569.537791] usb usb7: root hub lost power or was reset kern :warn : [300569.537867] usb usb8: root hub lost power or was reset kern :warn : [300569.538456] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :warn : [300569.539490] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :notice: [300569.540372] sd 0:0:0:0: [sda] Starting disk kern :debug : [300569.610261] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :err : [300569.638051] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add kern :err : [300569.638053] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 kern :err : [300569.638063] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add kern :err : [300569.638065] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00 kern :info : [300569.638385] serial 00:05: activated kern :info : [300569.638625] parport_pc 00:06: activated kern :info : [300569.638735] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [300569.641699] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [300569.844113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kern :info : [300569.844142] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) kern :debug : [300569.846678] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [300569.847276] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [300569.847279] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [300569.847281] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [300569.847454] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [300569.847555] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :debug : [300569.847684] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [300569.847686] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :debug : [300569.848917] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [300569.848919] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [300569.848920] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [300569.849118] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [300569.849206] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [300569.849210] ata1.00: configured for UDMA/133 kern :debug : [300569.851801] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [300569.852869] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [300569.852871] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :info : [300569.853855] ata2.00: configured for UDMA/100 kern :info : [300569.854050] usb 4-1: reset full-speed USB device number 2 using uhci_hcd kern :info : [300569.855130] usb 1-6: reset high-speed USB device number 5 using ehci-pci kern :debug : [300569.997952] hdaps: initial mode latch is 0x05 kern :debug : [300569.998093] hdaps: setting ec_rate=250, filter_order=2 kern :info : [300569.998323] PM: resume of devices complete after 463.735 msecs kern :notice: [300569.998569] Restarting tasks ... kern :info : [300570.011037] usb 2-4: USB disconnect, device number 5 kern :info : [300570.013897] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device kern :notice: [300570.036184] done. kern :info : [300570.051452] video LNXVIDEO:00: Restoring backlight state kern :notice: [300570.092039] firewire_core 0000:15:00.1: rediscovered device fw0 kern :info : [300570.443398] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [300570.510728] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :info : [300570.750683] cfg80211: World regulatory domain updated: kern :info : [300570.750688] cfg80211: DFS Master region: unset kern :info : [300570.750689] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) kern :info : [300570.750692] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [300570.750694] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [300570.750695] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [300570.750697] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [300570.750698] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [300574.604085] usb 2-4: new high-speed USB device number 6 using ehci-pci kern :info : [300575.421763] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 kern :info : [300575.421768] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kern :info : [300575.421772] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device kern :info : [300575.421775] usb 2-4: Manufacturer: Ericsson kern :info : [300575.421777] usb 2-4: SerialNumber: 3541430256485280 kern :info : [300575.443608] cdc_acm 2-4:1.1: ttyACM0: USB ACM device kern :info : [300575.448925] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [300575.449034] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [300575.449071] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [300575.458120] cdc_acm 2-4:1.3: ttyACM1: USB ACM device kern :info : [300575.470111] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device kern :info : [300575.526617] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device kern :info : [300575.542119] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 kern :info : [300575.556109] cdc_acm 2-4:1.9: ttyACM2: USB ACM device kern :warn : [300576.058246] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [300576.058328] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [300576.058512] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [300576.058578] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [300576.058583] ata1.00: configured for UDMA/133 kern :info : [300576.058593] ata1: EH complete kern :notice: [300576.787146] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA kern :info : [300576.788200] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [300576.821384] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [300576.825927] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :info : [300576.954029] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [300578.340375] thinkpad_acpi: EC reports that Thermal Table has changed kern :info : [300578.455418] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. kern :info : [300578.468703] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [300578.521652] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [300578.607163] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :warn : [300579.031373] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [300579.031449] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [300579.031608] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [300579.031651] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [300579.031654] ata1.00: configured for UDMA/133 kern :info : [300579.031661] ata1: EH complete kern :notice: [300579.031793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern :info : [300579.039270] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [300579.046614] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [300580.356890] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [300580.357001] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [300580.357061] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [301137.119405] e1000e: eth0 NIC Link is Down kern :debug : [301141.285679] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :debug : [301141.386199] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :info : [301141.386537] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [301141.394788] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [301141.397776] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [301141.421657] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [301142.963026] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [301142.963147] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [301142.963201] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [311963.106954] traps: notification-da[5261] trap int3 ip:7f625399984e sp:7fff8c963480 error:0 kern :info : [312114.109364] traps: notification-da[5583] trap int3 ip:7f7138aa784e sp:7fff6bf0ed30 error:0 kern :info : [326979.436188] e1000e: eth0 NIC Link is Down kern :info : [326979.561379] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [326979.795303] thinkpad_acpi: EC reports that Thermal Table has changed kern :info : [326979.980084] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [326980.073832] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :warn : [326980.638532] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :info : [326980.963335] PM: Syncing filesystems ... done. kern :notice: [326981.039618] Freezing user space processes ... kern :warn : [326981.447354] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :notice: [326981.453170] (elapsed 0.413 seconds) done. kern :notice: [326981.453183] Freezing remaining freezable tasks ... (elapsed 1.401 seconds) done. kern :notice: [326982.854776] Suspending console(s) (use no_console_suspend to debug) kern :debug : [326982.855361] hdaps: setting ec_rate=0, filter_order=1 kern :notice: [326983.057461] sd 0:0:0:0: [sda] Synchronizing SCSI cache kern :info : [326983.058725] parport_pc 00:06: disabled kern :info : [326983.058781] serial 00:05: disabled kern :info : [326983.059141] serial 00:05: System wakeup disabled by ACPI kern :notice: [326983.060398] sd 0:0:0:0: [sda] Stopping disk kern :info : [326983.535161] PM: suspend of devices complete after 679.949 msecs kern :info : [326983.546094] PM: late suspend of devices complete after 10.928 msecs kern :info : [326983.546726] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI kern :info : [326983.546811] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI kern :info : [326983.547223] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI kern :info : [326983.547245] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI kern :info : [326983.547266] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI kern :info : [326983.558038] PM: noirq suspend of devices complete after 11.941 msecs kern :info : [326983.558652] ACPI: Preparing to enter system sleep state S3 kern :info : [326983.562709] PM: Saving platform NVS memory kern :info : [326983.563724] Disabling non-boot CPUs ... kern :info : [326983.564889] kvm: disabling virtualization on CPU1 kern :info : [326983.565032] smpboot: CPU 1 is now offline kern :info : [326983.565309] ACPI: Low-level resume complete kern :info : [326983.565309] PM: Restoring platform NVS memory kern :info : [326983.565309] Enabling non-boot CPUs ... kern :info : [326983.565309] x86: Booting SMP configuration: kern :info : [326983.565309] smpboot: Booting Node 0 Processor 1 APIC 0x1 kern :info : [326983.564889] Disabled fast string operations kern :info : [326983.564889] kvm: enabling virtualization on CPU1 kern :info : [326983.585361] CPU1 is up kern :info : [326983.588241] ACPI: Waking up from system sleep state S3 kern :info : [326983.609217] thinkpad_acpi: EC reports that Thermal Table has changed kern :info : [326983.614846] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI kern :info : [326983.614938] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI kern :info : [326983.615331] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI kern :info : [326983.625219] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI kern :info : [326983.627144] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI kern :info : [326983.627393] PM: noirq resume of devices complete after 12.750 msecs kern :info : [326983.627684] PM: early resume of devices complete after 0.250 msecs kern :warn : [326983.629877] usb usb3: root hub lost power or was reset kern :warn : [326983.629958] usb usb4: root hub lost power or was reset kern :warn : [326983.630048] usb usb5: root hub lost power or was reset kern :debug : [326983.630191] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X kern :warn : [326983.630500] usb usb6: root hub lost power or was reset kern :warn : [326983.630578] usb usb7: root hub lost power or was reset kern :warn : [326983.630655] usb usb8: root hub lost power or was reset kern :warn : [326983.630880] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :warn : [326983.631942] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :notice: [326983.633299] sd 0:0:0:0: [sda] Starting disk kern :debug : [326983.703209] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :err : [326983.731108] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add kern :err : [326983.731110] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 kern :err : [326983.731121] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add kern :err : [326983.731123] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00 kern :info : [326983.731433] serial 00:05: activated kern :info : [326983.731665] parport_pc 00:06: activated kern :info : [326983.731777] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [326983.734751] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [326983.937112] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) kern :info : [326983.937143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kern :debug : [326983.939577] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [326983.940261] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [326983.940264] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [326983.940266] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [326983.940523] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [326983.940568] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [326983.940571] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :debug : [326983.940648] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :debug : [326983.941963] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [326983.941965] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [326983.941967] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [326983.942131] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [326983.942218] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [326983.942221] ata1.00: configured for UDMA/133 kern :debug : [326983.944555] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [326983.945623] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [326983.945626] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :info : [326983.946620] ata2.00: configured for UDMA/100 kern :info : [326983.947064] usb 4-1: reset full-speed USB device number 2 using uhci_hcd kern :info : [326983.947067] usb 1-6: reset high-speed USB device number 5 using ehci-pci kern :debug : [326984.090714] hdaps: initial mode latch is 0x05 kern :debug : [326984.090826] hdaps: setting ec_rate=250, filter_order=2 kern :info : [326984.091053] PM: resume of devices complete after 463.366 msecs kern :notice: [326984.091663] Restarting tasks ... kern :info : [326984.091685] ACPI: \_SB_.GDCK: docking kern :info : [326984.091947] usb 2-4: USB disconnect, device number 6 kern :info : [326984.092677] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device kern :notice: [326984.117125] done. kern :info : [326984.134360] video LNXVIDEO:00: Restoring backlight state kern :notice: [326984.184036] firewire_core 0000:15:00.1: rediscovered device fw0 kern :info : [326984.436036] usb 1-5: new high-speed USB device number 9 using ehci-pci kern :info : [326984.551318] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485 kern :info : [326984.551330] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 kern :info : [326984.551598] hub 1-5:1.0: USB hub found kern :info : [326984.551687] hub 1-5:1.0: 4 ports detected kern :info : [326986.740970] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [326986.741263] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [326988.705116] usb 2-4: new high-speed USB device number 7 using ehci-pci kern :info : [326989.524715] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 kern :info : [326989.524732] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kern :info : [326989.524744] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device kern :info : [326989.524756] usb 2-4: Manufacturer: Ericsson kern :info : [326989.524767] usb 2-4: SerialNumber: 3541430256485280 kern :info : [326989.538193] cdc_acm 2-4:1.1: ttyACM0: USB ACM device kern :info : [326989.612809] cdc_acm 2-4:1.3: ttyACM1: USB ACM device kern :info : [326989.627808] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device kern :info : [326989.633055] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device kern :info : [326989.639223] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 kern :info : [326989.646951] cdc_acm 2-4:1.9: ttyACM2: USB ACM device kern :info : [327099.075335] e1000e: eth0 NIC Link is Down kern :debug : [327103.653557] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :debug : [327103.754159] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :info : [327103.754511] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [327103.763320] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [327103.766350] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [327103.790658] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [327106.021980] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [327106.022195] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [327112.811831] wlan0: authenticate with c0:25:06:47:03:83 kern :info : [327112.813482] wlan0: send auth to c0:25:06:47:03:83 (try 1/3) kern :info : [327112.815803] wlan0: authenticated kern :info : [327112.816052] wlan0: associate with c0:25:06:47:03:83 (try 1/3) kern :info : [327112.833672] wlan0: RX AssocResp from c0:25:06:47:03:83 (capab=0x431 status=0 aid=1) kern :info : [327112.843309] wlan0: associated kern :info : [327112.843345] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready kern :info : [327112.843426] cfg80211: Calling CRDA for country: DE kern :info : [327112.848122] cfg80211: Regulatory domain changed to country: DE kern :info : [327112.848131] cfg80211: DFS Master region: unset kern :info : [327112.848133] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) kern :info : [327112.848145] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) kern :info : [327112.848151] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) kern :info : [327112.848158] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) kern :info : [327112.848164] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s) kern :info : [327112.848170] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) kern :warn : [376493.138285] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [376493.138315] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [376493.138328] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [376493.138343] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [376493.138359] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [376493.138375] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [376493.138400] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [376493.138411] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [376493.138427] i915 0000:00:02.0: no hotplug settings from platform kern :info : [376493.138438] i915 0000:00:02.0: using default PCI settings kern :warn : [376493.138453] pci 0000:00:02.1: no hotplug settings from platform kern :info : [376493.138464] pci 0000:00:02.1: using default PCI settings kern :warn : [376493.138480] pci 0000:00:03.0: no hotplug settings from platform kern :info : [376493.138490] pci 0000:00:03.0: using default PCI settings kern :warn : [376493.138507] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [376493.138517] e1000e 0000:00:19.0: using default PCI settings kern :warn : [376493.138537] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [376493.138547] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [376493.138566] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [376493.138577] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [376493.138596] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [376493.138607] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [376493.138626] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [376493.138637] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [376493.138656] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [376493.138669] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [376493.138682] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [376493.138703] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [376493.138717] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [376493.138735] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [376493.138749] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [376493.138762] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [376493.138775] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [376493.138786] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [376493.138805] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [376493.138816] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [376493.138834] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [376493.138845] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [376493.138864] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [376493.138875] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [376493.138893] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [376493.138904] pci 0000:00:1e.0: using default PCI settings kern :warn : [376493.138930] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [376493.138941] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [376493.138963] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [376493.138974] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [376493.138996] r592 0000:15:00.4: no hotplug settings from platform kern :info : [376493.139029] r592 0000:15:00.4: using default PCI settings kern :warn : [376493.139054] pci 0000:15:00.5: no hotplug settings from platform kern :info : [376493.139065] pci 0000:15:00.5: using default PCI settings kern :warn : [376493.139089] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [376493.139103] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [376493.139126] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [376493.139141] ahci 0000:00:1f.2: using default PCI settings kern :warn : [376493.139162] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [376493.139173] i801_smbus 0000:00:1f.3: using default PCI settings kern :warn : [376533.072257] acpi PNP0401:00: Cannot transition to non-D0 state from D3 kern :info : [376533.072373] ACPI: \_SB_.GDCK: undocking kern :info : [376533.089788] usb 1-5: USB disconnect, device number 9 kern :info : [376534.274221] e1000e: eth0 NIC Link is Down kern :info : [376534.373287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [376534.821826] thinkpad_acpi: EC reports that Thermal Table has changed kern :warn : [376534.822634] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [376534.822652] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [376534.822660] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [376534.822672] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [376534.822683] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [376534.822693] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [376534.822709] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [376534.822716] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [376534.822735] i915 0000:00:02.0: no hotplug settings from platform kern :info : [376534.822742] i915 0000:00:02.0: using default PCI settings kern :warn : [376534.822755] pci 0000:00:02.1: no hotplug settings from platform kern :info : [376534.822761] pci 0000:00:02.1: using default PCI settings kern :warn : [376534.822780] pci 0000:00:03.0: no hotplug settings from platform kern :info : [376534.822786] pci 0000:00:03.0: using default PCI settings kern :warn : [376534.822801] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [376534.822807] e1000e 0000:00:19.0: using default PCI settings kern :warn : [376534.822821] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [376534.822827] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [376534.822840] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [376534.822847] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [376534.822860] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [376534.822866] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [376534.822879] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [376534.822886] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [376534.822899] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [376534.822908] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [376534.822916] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [376534.822931] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [376534.822938] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [376534.822951] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [376534.822959] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [376534.822967] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [376534.822975] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [376534.822982] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [376534.822995] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [376534.823028] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [376534.823042] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [376534.823049] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [376534.823061] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [376534.823068] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [376534.823081] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [376534.823088] pci 0000:00:1e.0: using default PCI settings kern :warn : [376534.823107] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [376534.823114] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [376534.823130] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [376534.823137] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [376534.823152] r592 0000:15:00.4: no hotplug settings from platform kern :info : [376534.823159] r592 0000:15:00.4: using default PCI settings kern :warn : [376534.823175] pci 0000:15:00.5: no hotplug settings from platform kern :info : [376534.823181] pci 0000:15:00.5: using default PCI settings kern :warn : [376534.823196] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [376534.823203] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [376534.823218] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [376534.823224] ahci 0000:00:1f.2: using default PCI settings kern :warn : [376534.823237] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [376534.823243] i801_smbus 0000:00:1f.3: using default PCI settings kern :info : [376535.214277] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [376535.311568] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :warn : [376535.668170] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376536.469988] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376537.271549] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376538.073355] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376538.875256] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376539.678238] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376540.480804] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376541.282900] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376542.086152] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376542.887971] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [376543.188977] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [376543.189297] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [376543.189531] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [376543.189604] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [376543.189618] ata1.00: configured for UDMA/133 kern :info : [376543.189636] ata1: EH complete kern :notice: [376543.189808] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA kern :info : [376543.199341] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [376543.206641] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :info : [376546.380547] PM: Syncing filesystems ... done. kern :notice: [376546.444474] Freezing user space processes ... (elapsed 0.001 seconds) done. kern :notice: [376546.446216] Freezing remaining freezable tasks ... (elapsed 5.747 seconds) done. kern :notice: [376552.194155] Suspending console(s) (use no_console_suspend to debug) kern :debug : [376552.194633] hdaps: setting ec_rate=0, filter_order=1 kern :info : [376552.408236] wlan0: deauthenticating from c0:25:06:47:03:83 by local choice (Reason: 3=DEAUTH_LEAVING) kern :notice: [376552.408905] sd 0:0:0:0: [sda] Stopping disk kern :info : [376552.415407] parport_pc 00:06: disabled kern :info : [376552.415460] serial 00:05: disabled kern :info : [376552.415610] cfg80211: Calling CRDA to update world regulatory domain kern :info : [376552.415796] serial 00:05: System wakeup disabled by ACPI kern :info : [376552.871159] PM: suspend of devices complete after 676.642 msecs kern :info : [376552.882096] PM: late suspend of devices complete after 10.932 msecs kern :info : [376552.882731] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI kern :info : [376552.882819] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI kern :info : [376552.883058] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI kern :info : [376552.883133] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI kern :info : [376552.883182] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI kern :info : [376552.894035] PM: noirq suspend of devices complete after 11.936 msecs kern :info : [376552.894648] ACPI: Preparing to enter system sleep state S3 kern :info : [376552.898642] PM: Saving platform NVS memory kern :info : [376552.899641] Disabling non-boot CPUs ... kern :info : [376552.900803] kvm: disabling virtualization on CPU1 kern :info : [376552.900945] smpboot: CPU 1 is now offline kern :info : [376552.901212] ACPI: Low-level resume complete kern :info : [376552.901212] PM: Restoring platform NVS memory kern :info : [376552.901212] Enabling non-boot CPUs ... kern :info : [376552.901212] x86: Booting SMP configuration: kern :info : [376552.901212] smpboot: Booting Node 0 Processor 1 APIC 0x1 kern :info : [376552.900803] Disabled fast string operations kern :info : [376552.900803] kvm: enabling virtualization on CPU1 kern :info : [376552.918283] CPU1 is up kern :info : [376552.921140] ACPI: Waking up from system sleep state S3 kern :info : [376552.946378] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI kern :info : [376552.946442] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI kern :info : [376552.946912] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI kern :info : [376552.957094] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI kern :info : [376552.957226] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI kern :info : [376552.958534] PM: noirq resume of devices complete after 12.368 msecs kern :info : [376552.958768] PM: early resume of devices complete after 0.197 msecs kern :warn : [376552.965085] usb usb3: root hub lost power or was reset kern :warn : [376552.965163] usb usb4: root hub lost power or was reset kern :warn : [376552.965240] usb usb5: root hub lost power or was reset kern :debug : [376552.965377] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X kern :warn : [376552.965630] usb usb6: root hub lost power or was reset kern :warn : [376552.965704] usb usb7: root hub lost power or was reset kern :warn : [376552.965780] usb usb8: root hub lost power or was reset kern :warn : [376552.965929] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :warn : [376552.966969] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :notice: [376552.968772] sd 0:0:0:0: [sda] Starting disk kern :debug : [376553.040147] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :err : [376553.066109] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add kern :err : [376553.066112] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 kern :err : [376553.066117] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add kern :err : [376553.066120] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00 kern :info : [376553.066437] serial 00:05: activated kern :info : [376553.066685] parport_pc 00:06: activated kern :info : [376553.066820] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [376553.069790] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [376553.272112] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) kern :info : [376553.272141] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kern :debug : [376553.274876] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [376553.275246] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [376553.275248] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [376553.275251] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [376553.275455] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [376553.275557] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :debug : [376553.275969] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [376553.275971] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :debug : [376553.276848] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [376553.276850] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [376553.276851] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [376553.277024] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [376553.277084] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [376553.277087] ata1.00: configured for UDMA/133 kern :debug : [376553.280350] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [376553.281487] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [376553.281489] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :info : [376553.282059] usb 1-6: reset high-speed USB device number 5 using ehci-pci kern :info : [376553.282062] usb 4-1: reset full-speed USB device number 2 using uhci_hcd kern :info : [376553.282574] ata2.00: configured for UDMA/100 kern :notice: [376553.288270] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern :debug : [376553.426000] hdaps: initial mode latch is 0x05 kern :debug : [376553.426130] hdaps: setting ec_rate=250, filter_order=2 kern :info : [376553.426361] PM: resume of devices complete after 467.591 msecs kern :notice: [376553.426975] Restarting tasks ... kern :info : [376553.438412] usb 2-4: USB disconnect, device number 7 kern :info : [376553.441591] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device kern :info : [376553.447142] cfg80211: World regulatory domain updated: kern :info : [376553.447156] cfg80211: DFS Master region: unset kern :info : [376553.447158] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) kern :info : [376553.447170] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [376553.447177] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [376553.447183] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [376553.447190] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [376553.447196] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :notice: [376553.451439] done. kern :info : [376553.475296] video LNXVIDEO:00: Restoring backlight state kern :notice: [376553.519045] firewire_core 0000:15:00.1: rediscovered device fw0 kern :info : [376554.114155] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [376554.239160] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :info : [376556.219924] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [376556.220043] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [376556.220082] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [376556.499528] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [376558.142098] usb 2-4: new high-speed USB device number 8 using ehci-pci kern :info : [376558.585240] thinkpad_acpi: EC reports that Thermal Table has changed kern :warn : [376558.864089] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [376558.864193] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [376558.864394] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [376558.864467] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [376558.864480] ata1.00: configured for UDMA/133 kern :info : [376558.864498] ata1: EH complete kern :info : [376558.902538] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 kern :info : [376558.902554] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kern :info : [376558.902567] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device kern :info : [376558.902578] usb 2-4: Manufacturer: Ericsson kern :info : [376558.902589] usb 2-4: SerialNumber: 3541430256485280 kern :info : [376558.913910] cdc_acm 2-4:1.1: ttyACM0: USB ACM device kern :info : [376558.924460] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [376558.925728] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [376558.931347] cdc_acm 2-4:1.3: ttyACM1: USB ACM device kern :info : [376558.934900] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [376558.946984] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device kern :info : [376558.950586] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device kern :info : [376558.955198] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 kern :info : [376558.964484] cdc_acm 2-4:1.9: ttyACM2: USB ACM device kern :info : [376559.141880] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. kern :info : [376559.163751] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [376559.225890] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [376559.302562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [376561.013630] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [376561.013750] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [376561.013787] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [376643.542377] e1000e: eth0 NIC Link is Down kern :debug : [376647.966692] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :debug : [376648.067207] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :info : [376648.067562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [376648.074767] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [376648.077762] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [376648.101617] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [376649.677884] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [376649.678015] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [376649.678064] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [411298.526258] thinkpad_acpi: EC reports that Thermal Table has changed kern :info : [411298.586131] e1000e: eth0 NIC Link is Down kern :info : [411298.679724] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [411298.706962] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [411298.715765] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :warn : [411299.219884] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [411299.219942] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [411299.220122] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [411299.220177] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [411299.220185] ata1.00: configured for UDMA/133 kern :info : [411299.220198] ata1: EH complete kern :notice: [411299.220469] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA kern :info : [411299.228658] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [411299.235990] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :info : [411304.413102] PM: Syncing filesystems ... done. kern :notice: [411304.476062] Freezing user space processes ... (elapsed 0.001 seconds) done. kern :notice: [411304.477670] Freezing remaining freezable tasks ... (elapsed 2.394 seconds) done. kern :notice: [411306.871946] Suspending console(s) (use no_console_suspend to debug) kern :debug : [411306.872426] hdaps: setting ec_rate=0, filter_order=1 kern :notice: [411307.073399] sd 0:0:0:0: [sda] Stopping disk kern :info : [411307.073753] parport_pc 00:06: disabled kern :info : [411307.073811] serial 00:05: disabled kern :info : [411307.074060] serial 00:05: System wakeup disabled by ACPI kern :info : [411307.665159] PM: suspend of devices complete after 792.846 msecs kern :info : [411307.676108] PM: late suspend of devices complete after 10.945 msecs kern :info : [411307.676771] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI kern :info : [411307.676859] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI kern :info : [411307.677327] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI kern :info : [411307.677376] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI kern :info : [411307.677395] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI kern :info : [411307.688032] PM: noirq suspend of devices complete after 11.921 msecs kern :info : [411307.688651] ACPI: Preparing to enter system sleep state S3 kern :info : [411307.692563] PM: Saving platform NVS memory kern :info : [411307.693564] Disabling non-boot CPUs ... kern :info : [411307.694726] kvm: disabling virtualization on CPU1 kern :info : [411307.694870] smpboot: CPU 1 is now offline kern :info : [411307.695124] ACPI: Low-level resume complete kern :info : [411307.695124] PM: Restoring platform NVS memory kern :info : [411307.695124] Enabling non-boot CPUs ... kern :info : [411307.695124] x86: Booting SMP configuration: kern :info : [411307.695124] smpboot: Booting Node 0 Processor 1 APIC 0x1 kern :info : [411307.694726] Disabled fast string operations kern :info : [411307.694726] kvm: enabling virtualization on CPU1 kern :info : [411307.715350] CPU1 is up kern :info : [411307.718219] ACPI: Waking up from system sleep state S3 kern :info : [411307.739376] thinkpad_acpi: EC reports that Thermal Table has changed kern :info : [411307.745193] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI kern :info : [411307.745279] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI kern :info : [411307.745643] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI kern :info : [411307.756111] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI kern :info : [411307.756377] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI kern :info : [411307.756735] PM: noirq resume of devices complete after 11.750 msecs kern :info : [411307.756965] PM: early resume of devices complete after 0.193 msecs kern :warn : [411307.763441] usb usb3: root hub lost power or was reset kern :warn : [411307.763696] usb usb4: root hub lost power or was reset kern :warn : [411307.763726] usb usb5: root hub lost power or was reset kern :debug : [411307.763824] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X kern :warn : [411307.763934] usb usb6: root hub lost power or was reset kern :warn : [411307.764004] usb usb7: root hub lost power or was reset kern :warn : [411307.764157] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :warn : [411307.764257] usb usb8: root hub lost power or was reset kern :notice: [411307.764341] sd 0:0:0:0: [sda] Starting disk kern :warn : [411307.765403] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :debug : [411307.834156] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :err : [411307.864052] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add kern :err : [411307.864055] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 kern :err : [411307.864104] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add kern :err : [411307.864106] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00 kern :info : [411307.864438] serial 00:05: activated kern :info : [411307.864676] parport_pc 00:06: activated kern :info : [411307.864789] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [411307.867754] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [411308.069056] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) kern :info : [411308.069087] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kern :debug : [411308.071560] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [411308.072211] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [411308.072214] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [411308.072216] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [411308.072426] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [411308.072530] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :debug : [411308.072576] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [411308.072579] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :debug : [411308.076674] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [411308.077791] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [411308.077794] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :info : [411308.078876] ata2.00: configured for UDMA/100 kern :info : [411308.079048] usb 1-6: reset high-speed USB device number 5 using ehci-pci kern :debug : [411308.079544] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [411308.079551] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [411308.079552] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [411308.079723] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [411308.079817] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [411308.079821] ata1.00: configured for UDMA/133 kern :info : [411308.080057] usb 4-1: reset full-speed USB device number 2 using uhci_hcd kern :notice: [411308.090256] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern :debug : [411308.227719] hdaps: initial mode latch is 0x05 kern :debug : [411308.227832] hdaps: setting ec_rate=250, filter_order=2 kern :info : [411308.228062] PM: resume of devices complete after 471.095 msecs kern :notice: [411308.228669] Restarting tasks ... kern :info : [411308.228694] ACPI: \_SB_.GDCK: docking kern :info : [411308.232540] usb 2-4: USB disconnect, device number 8 kern :info : [411308.234804] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device kern :notice: [411308.252059] done. kern :info : [411308.286601] video LNXVIDEO:00: Restoring backlight state kern :notice: [411308.317034] firewire_core 0000:15:00.1: rediscovered device fw0 kern :info : [411308.448042] usb 1-5: new high-speed USB device number 10 using ehci-pci kern :info : [411308.562404] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485 kern :info : [411308.562419] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 kern :info : [411308.562680] hub 1-5:1.0: USB hub found kern :info : [411308.562772] hub 1-5:1.0: 4 ports detected kern :info : [411308.912587] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. kern :info : [411308.980241] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :warn : [411308.996381] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [411308.996431] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [411308.996581] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [411308.996625] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [411308.996633] ata1.00: configured for UDMA/133 kern :info : [411308.996646] ata1: EH complete kern :info : [411309.020146] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [411309.039568] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [411309.305489] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [411311.033910] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [411311.034082] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [411312.828188] usb 2-4: new high-speed USB device number 9 using ehci-pci kern :info : [411313.696644] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 kern :info : [411313.696674] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kern :info : [411313.696698] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device kern :info : [411313.696721] usb 2-4: Manufacturer: Ericsson kern :info : [411313.696743] usb 2-4: SerialNumber: 3541430256485280 kern :info : [411313.743117] cdc_acm 2-4:1.1: ttyACM0: USB ACM device kern :info : [411313.760695] cdc_acm 2-4:1.3: ttyACM1: USB ACM device kern :info : [411313.773934] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device kern :info : [411313.777557] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device kern :info : [411313.785919] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 kern :info : [411313.797105] cdc_acm 2-4:1.9: ttyACM2: USB ACM device kern :info : [411318.239655] e1000e: eth0 NIC Link is Down kern :debug : [411322.063876] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :debug : [411322.164176] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :info : [411322.164334] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [411322.167113] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [411322.170085] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [411322.193747] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [411324.575981] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [411324.576132] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [411326.802865] wlan0: authenticate with c0:25:06:47:03:83 kern :info : [411326.805948] wlan0: send auth to c0:25:06:47:03:83 (try 1/3) kern :info : [411326.808294] wlan0: authenticated kern :info : [411326.808428] wlan0: waiting for beacon from c0:25:06:47:03:83 kern :info : [411326.890134] wlan0: associate with c0:25:06:47:03:83 (try 1/3) kern :info : [411326.911592] wlan0: RX AssocResp from c0:25:06:47:03:83 (capab=0x431 status=0 aid=1) kern :info : [411326.923217] wlan0: associated kern :info : [411326.923292] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready kern :info : [411326.923442] cfg80211: Calling CRDA for country: DE kern :info : [411326.929474] cfg80211: Regulatory domain changed to country: DE kern :info : [411326.929501] cfg80211: DFS Master region: unset kern :info : [411326.929507] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) kern :info : [411326.929547] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) kern :info : [411326.929569] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) kern :info : [411326.929592] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) kern :info : [411326.929614] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s) kern :info : [411326.929636] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) kern :info : [432930.962712] wlan0: AP c0:25:06:47:03:83 changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) kern :info : [433230.889035] wlan0: AP c0:25:06:47:03:83 changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) kern :err : [451833.063121] iwlwifi 0000:03:00.0: fail to flush all tx fifo queues Q 2 kern :err : [451833.063152] iwlwifi 0000:03:00.0: Current SW read_ptr 211 write_ptr 212 kern :err : [451833.063201] iwl data: 00000000: 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ kern :err : [451833.063237] iwlwifi 0000:03:00.0: FH TRBs(0) = 0x00000000 kern :err : [451833.063271] iwlwifi 0000:03:00.0: FH TRBs(1) = 0x801020d3 kern :err : [451833.063306] iwlwifi 0000:03:00.0: FH TRBs(2) = 0x00000000 kern :err : [451833.063340] iwlwifi 0000:03:00.0: FH TRBs(3) = 0x8030007c kern :err : [451833.063374] iwlwifi 0000:03:00.0: FH TRBs(4) = 0x00000000 kern :err : [451833.063408] iwlwifi 0000:03:00.0: FH TRBs(5) = 0x00000000 kern :err : [451833.063441] iwlwifi 0000:03:00.0: FH TRBs(6) = 0x00000000 kern :err : [451833.063476] iwlwifi 0000:03:00.0: FH TRBs(7) = 0x00704016 kern :err : [451833.063555] iwlwifi 0000:03:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [125,125] kern :err : [451833.063634] iwlwifi 0000:03:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0] kern :err : [451833.063714] iwlwifi 0000:03:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [211,212] kern :err : [451833.063793] iwlwifi 0000:03:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.063873] iwlwifi 0000:03:00.0: Q 4 is active and mapped to fifo 7 ra_tid 0x0000 [23,23] kern :err : [451833.063952] iwlwifi 0000:03:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064061] iwlwifi 0000:03:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064143] iwlwifi 0000:03:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064223] iwlwifi 0000:03:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064302] iwlwifi 0000:03:00.0: Q 9 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064381] iwlwifi 0000:03:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064463] iwlwifi 0000:03:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064543] iwlwifi 0000:03:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064621] iwlwifi 0000:03:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064701] iwlwifi 0000:03:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064780] iwlwifi 0000:03:00.0: Q 15 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064859] iwlwifi 0000:03:00.0: Q 16 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.064941] iwlwifi 0000:03:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.065042] iwlwifi 0000:03:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :err : [451833.065126] iwlwifi 0000:03:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] kern :warn : [458914.694523] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [458914.694578] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [458914.694603] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [458914.694632] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [458914.694662] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [458914.694691] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [458914.694735] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [458914.694757] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [458914.694789] i915 0000:00:02.0: no hotplug settings from platform kern :info : [458914.694811] i915 0000:00:02.0: using default PCI settings kern :warn : [458914.694842] pci 0000:00:02.1: no hotplug settings from platform kern :info : [458914.694864] pci 0000:00:02.1: using default PCI settings kern :warn : [458914.694894] pci 0000:00:03.0: no hotplug settings from platform kern :info : [458914.694916] pci 0000:00:03.0: using default PCI settings kern :warn : [458914.694947] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [458914.694969] e1000e 0000:00:19.0: using default PCI settings kern :warn : [458914.695040] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [458914.695065] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [458914.695103] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [458914.695130] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [458914.695168] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [458914.695190] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [458914.695225] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [458914.695248] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [458914.695284] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [458914.695312] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [458914.695339] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [458914.695379] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [458914.695407] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [458914.695443] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [458914.695470] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [458914.695498] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [458914.695526] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [458914.695548] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [458914.695583] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [458914.695605] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [458914.695639] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [458914.695661] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [458914.695695] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [458914.695717] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [458914.695752] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [458914.695774] pci 0000:00:1e.0: using default PCI settings kern :warn : [458914.695818] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [458914.695841] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [458914.695881] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [458914.695904] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [458914.695944] r592 0000:15:00.4: no hotplug settings from platform kern :info : [458914.695966] r592 0000:15:00.4: using default PCI settings kern :warn : [458914.696028] pci 0000:15:00.5: no hotplug settings from platform kern :info : [458914.696031] pci 0000:15:00.5: using default PCI settings kern :warn : [458914.696049] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [458914.696051] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [458914.696068] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [458914.696070] ahci 0000:00:1f.2: using default PCI settings kern :warn : [458914.696085] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [458914.696087] i801_smbus 0000:00:1f.3: using default PCI settings kern :warn : [459515.871461] acpi PNP0401:00: Cannot transition to non-D0 state from D3 kern :info : [459515.871576] ACPI: \_SB_.GDCK: undocking kern :info : [459515.888911] usb 1-5: USB disconnect, device number 10 kern :info : [459517.020181] e1000e: eth0 NIC Link is Down kern :info : [459517.119181] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [459517.562270] thinkpad_acpi: EC reports that Thermal Table has changed kern :warn : [459517.562833] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment kern :info : [459517.562851] yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] kern :info : [459517.562859] yenta_cardbus 0000:15:00.0: bridge window [io 0x5000-0x50ff] kern :info : [459517.562870] yenta_cardbus 0000:15:00.0: bridge window [io 0x5400-0x54ff] kern :info : [459517.562880] yenta_cardbus 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] kern :info : [459517.562891] yenta_cardbus 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] kern :warn : [459517.562910] agpgart-intel 0000:00:00.0: no hotplug settings from platform kern :info : [459517.562916] agpgart-intel 0000:00:00.0: using default PCI settings kern :warn : [459517.562926] i915 0000:00:02.0: no hotplug settings from platform kern :info : [459517.562932] i915 0000:00:02.0: using default PCI settings kern :warn : [459517.562951] pci 0000:00:02.1: no hotplug settings from platform kern :info : [459517.562958] pci 0000:00:02.1: using default PCI settings kern :warn : [459517.562967] pci 0000:00:03.0: no hotplug settings from platform kern :info : [459517.562974] pci 0000:00:03.0: using default PCI settings kern :warn : [459517.562985] e1000e 0000:00:19.0: no hotplug settings from platform kern :info : [459517.562991] e1000e 0000:00:19.0: using default PCI settings kern :warn : [459517.563021] uhci_hcd 0000:00:1a.0: no hotplug settings from platform kern :info : [459517.563028] uhci_hcd 0000:00:1a.0: using default PCI settings kern :warn : [459517.563042] uhci_hcd 0000:00:1a.1: no hotplug settings from platform kern :info : [459517.563048] uhci_hcd 0000:00:1a.1: using default PCI settings kern :warn : [459517.563061] uhci_hcd 0000:00:1a.2: no hotplug settings from platform kern :info : [459517.563067] uhci_hcd 0000:00:1a.2: using default PCI settings kern :warn : [459517.563080] ehci-pci 0000:00:1a.7: no hotplug settings from platform kern :info : [459517.563087] ehci-pci 0000:00:1a.7: using default PCI settings kern :warn : [459517.563100] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform kern :warn : [459517.563109] pcieport 0000:00:1c.0: no hotplug settings from platform kern :warn : [459517.563117] pcieport 0000:00:1c.1: no hotplug settings from platform kern :warn : [459517.563131] iwlwifi 0000:03:00.0: no hotplug settings from platform kern :warn : [459517.563139] pcieport 0000:00:1c.2: no hotplug settings from platform kern :warn : [459517.563152] pci 0000:04:00.0: no hotplug settings from platform kern :warn : [459517.563160] pcieport 0000:00:1c.3: no hotplug settings from platform kern :warn : [459517.563167] pcieport 0000:00:1c.4: no hotplug settings from platform kern :warn : [459517.563175] uhci_hcd 0000:00:1d.0: no hotplug settings from platform kern :info : [459517.563181] uhci_hcd 0000:00:1d.0: using default PCI settings kern :warn : [459517.563194] uhci_hcd 0000:00:1d.1: no hotplug settings from platform kern :info : [459517.563201] uhci_hcd 0000:00:1d.1: using default PCI settings kern :warn : [459517.563214] uhci_hcd 0000:00:1d.2: no hotplug settings from platform kern :info : [459517.563220] uhci_hcd 0000:00:1d.2: using default PCI settings kern :warn : [459517.563234] ehci-pci 0000:00:1d.7: no hotplug settings from platform kern :info : [459517.563240] ehci-pci 0000:00:1d.7: using default PCI settings kern :warn : [459517.563254] pci 0000:00:1e.0: no hotplug settings from platform kern :info : [459517.563260] pci 0000:00:1e.0: using default PCI settings kern :warn : [459517.563279] firewire_ohci 0000:15:00.1: no hotplug settings from platform kern :info : [459517.563286] firewire_ohci 0000:15:00.1: using default PCI settings kern :warn : [459517.563302] sdhci-pci 0000:15:00.2: no hotplug settings from platform kern :info : [459517.563308] sdhci-pci 0000:15:00.2: using default PCI settings kern :warn : [459517.563324] r592 0000:15:00.4: no hotplug settings from platform kern :info : [459517.563331] r592 0000:15:00.4: using default PCI settings kern :warn : [459517.563346] pci 0000:15:00.5: no hotplug settings from platform kern :info : [459517.563352] pci 0000:15:00.5: using default PCI settings kern :warn : [459517.563367] lpc_ich 0000:00:1f.0: no hotplug settings from platform kern :info : [459517.563373] lpc_ich 0000:00:1f.0: using default PCI settings kern :warn : [459517.563388] ahci 0000:00:1f.2: no hotplug settings from platform kern :info : [459517.563394] ahci 0000:00:1f.2: using default PCI settings kern :warn : [459517.563407] i801_smbus 0000:00:1f.3: no hotplug settings from platform kern :info : [459517.563414] i801_smbus 0000:00:1f.3: using default PCI settings kern :info : [459517.785355] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [459517.832515] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :warn : [459518.376481] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459519.178862] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459519.981540] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459520.783476] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459521.594290] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459522.396078] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459523.199433] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459524.000693] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459524.802309] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459525.603746] e1000e 0000:00:19.0 eth0: Error reading PHY register kern :warn : [459525.933859] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [459525.933956] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [459525.934364] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [459525.934436] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [459525.934444] ata1.00: configured for UDMA/133 kern :info : [459525.934456] ata1: EH complete kern :notice: [459525.934577] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA kern :info : [459525.945353] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [459525.950506] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :info : [459542.297838] PM: Syncing filesystems ... done. kern :notice: [459542.360546] Freezing user space processes ... (elapsed 0.001 seconds) done. kern :notice: [459542.362191] Freezing remaining freezable tasks ... (elapsed 5.481 seconds) done. kern :notice: [459547.843827] Suspending console(s) (use no_console_suspend to debug) kern :debug : [459547.844313] hdaps: setting ec_rate=0, filter_order=1 kern :info : [459548.040848] wlan0: deauthenticating from c0:25:06:47:03:83 by local choice (Reason: 3=DEAUTH_LEAVING) kern :notice: [459548.041431] sd 0:0:0:0: [sda] Stopping disk kern :info : [459548.049697] parport_pc 00:06: disabled kern :info : [459548.049752] serial 00:05: disabled kern :info : [459548.049883] cfg80211: Calling CRDA to update world regulatory domain kern :info : [459548.050042] serial 00:05: System wakeup disabled by ACPI kern :info : [459548.455161] PM: suspend of devices complete after 610.961 msecs kern :info : [459548.466108] PM: late suspend of devices complete after 10.942 msecs kern :info : [459548.466773] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI kern :info : [459548.466861] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI kern :info : [459548.467103] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI kern :info : [459548.467282] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI kern :info : [459548.467300] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI kern :info : [459548.478027] PM: noirq suspend of devices complete after 11.916 msecs kern :info : [459548.478641] ACPI: Preparing to enter system sleep state S3 kern :info : [459548.482586] PM: Saving platform NVS memory kern :info : [459548.483599] Disabling non-boot CPUs ... kern :info : [459548.484764] kvm: disabling virtualization on CPU1 kern :info : [459548.484907] smpboot: CPU 1 is now offline kern :info : [459548.485160] ACPI: Low-level resume complete kern :info : [459548.485160] PM: Restoring platform NVS memory kern :info : [459548.485160] Enabling non-boot CPUs ... kern :info : [459548.485160] x86: Booting SMP configuration: kern :info : [459548.485160] smpboot: Booting Node 0 Processor 1 APIC 0x1 kern :info : [459548.484764] Disabled fast string operations kern :info : [459548.484764] kvm: enabling virtualization on CPU1 kern :info : [459548.502260] CPU1 is up kern :info : [459548.505146] ACPI: Waking up from system sleep state S3 kern :info : [459548.530699] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI kern :info : [459548.530744] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI kern :info : [459548.531164] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI kern :info : [459548.541206] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI kern :info : [459548.542123] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI kern :info : [459548.542573] PM: noirq resume of devices complete after 12.162 msecs kern :info : [459548.542810] PM: early resume of devices complete after 0.200 msecs kern :warn : [459548.548799] usb usb3: root hub lost power or was reset kern :warn : [459548.548888] usb usb4: root hub lost power or was reset kern :warn : [459548.549004] usb usb5: root hub lost power or was reset kern :debug : [459548.549149] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X kern :warn : [459548.549280] usb usb6: root hub lost power or was reset kern :warn : [459548.549337] usb usb7: root hub lost power or was reset kern :warn : [459548.549379] usb usb8: root hub lost power or was reset kern :warn : [459548.549446] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :warn : [459548.549575] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. kern :notice: [459548.551138] sd 0:0:0:0: [sda] Starting disk kern :debug : [459548.620249] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :err : [459548.649109] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add kern :err : [459548.649111] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 kern :err : [459548.649117] pciehp 0000:00:1c.2:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add kern :err : [459548.649120] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:04:00 kern :info : [459548.649442] serial 00:05: activated kern :info : [459548.649689] parport_pc 00:06: activated kern :info : [459548.649801] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [459548.652772] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [459548.855114] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) kern :info : [459548.855144] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kern :debug : [459548.857619] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [459548.858283] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [459548.858286] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [459548.858293] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [459548.858546] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [459548.858659] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [459548.858662] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :debug : [459548.858670] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :debug : [459548.860005] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded kern :info : [459548.860013] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out kern :info : [459548.860014] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :warn : [459548.860183] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [459548.860276] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [459548.860280] ata1.00: configured for UDMA/133 kern :debug : [459548.862759] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded kern :debug : [459548.863837] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded kern :info : [459548.863840] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out kern :info : [459548.864072] usb 4-1: reset full-speed USB device number 2 using uhci_hcd kern :info : [459548.864079] usb 1-6: reset high-speed USB device number 5 using ehci-pci kern :info : [459548.864934] ata2.00: configured for UDMA/100 kern :notice: [459548.871254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern :debug : [459549.008519] hdaps: initial mode latch is 0x05 kern :debug : [459549.008641] hdaps: setting ec_rate=250, filter_order=2 kern :info : [459549.008869] PM: resume of devices complete after 466.057 msecs kern :notice: [459549.009486] Restarting tasks ... kern :info : [459549.021222] usb 2-4: USB disconnect, device number 9 kern :notice: [459549.021418] done. kern :info : [459549.024071] cdc_ether 2-4:1.7 wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device kern :info : [459549.039282] video LNXVIDEO:00: Restoring backlight state kern :info : [459549.094956] cfg80211: World regulatory domain updated: kern :info : [459549.094972] cfg80211: DFS Master region: unset kern :info : [459549.094974] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) kern :info : [459549.094986] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [459549.094993] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [459549.094999] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [459549.095025] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :info : [459549.095033] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) kern :notice: [459549.103037] firewire_core 0000:15:00.1: rediscovered device fw0 kern :info : [459549.660994] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [459549.663382] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [459549.818873] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600 kern :info : [459549.873754] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600 kern :info : [459551.162857] thinkpad_acpi: EC reports that Thermal Table has changed kern :warn : [459552.909669] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [459552.909727] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :warn : [459552.909918] ata1.00: supports DRM functions and may not be fully accessible kern :debug : [459552.909995] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 kern :info : [459552.910027] ata1.00: configured for UDMA/133 kern :info : [459552.910048] ata1: EH complete kern :info : [459553.626100] usb 2-4: new high-speed USB device number 10 using ehci-pci kern :info : [459553.678829] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0 kern :info : [459553.685330] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 kern :info : [459554.530603] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 kern :info : [459554.530636] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kern :info : [459554.530660] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device kern :info : [459554.530684] usb 2-4: Manufacturer: Ericsson kern :info : [459554.530705] usb 2-4: SerialNumber: 3541430256485280 kern :info : [459554.549293] cdc_acm 2-4:1.1: ttyACM0: USB ACM device kern :info : [459554.565284] cdc_acm 2-4:1.3: ttyACM1: USB ACM device kern :info : [459554.576766] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device kern :info : [459554.581883] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device kern :info : [459554.587480] cdc_ether 2-4:1.7 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 kern :info : [459554.597801] cdc_acm 2-4:1.9: ttyACM2: USB ACM device kern :info : [459555.061031] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [459555.061171] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [459555.061241] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready kern :info : [459627.504490] e1000e: eth0 NIC Link is Down kern :info : [459627.511140] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :debug : [459631.735793] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :debug : [459631.836203] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X kern :info : [459631.836580] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready kern :info : [459631.848930] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S kern :info : [459631.851915] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0 kern :info : [459631.875833] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready kern :info : [459633.349029] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx kern :info : [459633.349173] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO kern :info : [459633.349242] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready