linux-kernel - [PATCH 3.10 061/143] usb:hub set hub->change

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri,  3 Oct 2014 14:34:16 -0700
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org, Shen Guang <shenguang10@...il.com>,
	Alan Stern <stern@...land.harvard.edu>,
	Sarah Sharp <sarah.a.sharp@...ux.intel.com>,
	Frans Klaver <fransklaver@...il.com>
Subject: [PATCH 3.10 061/143] usb:hub set hub->change_bits when over-current happens

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shen Guang <shenguang10@...il.com>

commit 08d1dec6f4054e3613f32051d9b149d4203ce0d2 upstream.

When we are doing compliance test with xHCI, we found that if we
enable CONFIG_USB_SUSPEND and plug in a bad device which causes
over-current condition to the root port, software will not be noticed.
The reason is that current code don't set hub->change_bits in
hub_activate() when over-current happens, and then hub_events() will
not check the port status because it thinks nothing changed.
If CONFIG_USB_SUSPEND is disabled, the interrupt pipe of the hub will
report the change and set hub->event_bits, and then hub_events() will
check what events happened.In this case over-current can be detected.

Signed-off-by: Shen Guang <shenguang10@...il.com>
Acked-by: Alan Stern <stern@...land.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@...ux.intel.com>
Cc: Frans Klaver <fransklaver@...il.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/usb/core/hub.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1165,7 +1165,8 @@ static void hub_activate(struct usb_hub
 			/* Tell khubd to disconnect the device or
 			 * check for a new connection
 			 */
-			if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+			if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
+			    (portstatus & USB_PORT_STAT_OVERCURRENT))
 				set_bit(port1, hub->change_bits);
 
 		} else if (portstatus & USB_PORT_STAT_ENABLE) {


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/