| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1394712342-15778-58-Taiwan-albertk@realtek.com>
Date: Tue, 7 Oct 2014 13:36:30 +0800
From: Hayes Wang <hayeswang@...ltek.com>
To: <netdev@...r.kernel.org>
CC: <nic_swsd@...ltek.com>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>, Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net-next] r8152: use mutex for hw settings
Use mutex to avoid that the serial hw settings would be interrupted
by other settings. Although there is no problem now, it makes the
driver more safe.
Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
---
drivers/net/usb/r8152.c | 69 +++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 67 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 6532620..4f99c43 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -26,7 +26,7 @@
#include <linux/mdio.h>
/* Version Information */
-#define DRIVER_VERSION "v1.06.1 (2014/10/01)"
+#define DRIVER_VERSION "v1.07.0 (2014/10/07)"
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@...ltek.com>"
#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
#define MODULENAME "r8152"
@@ -566,6 +566,7 @@ struct r8152 {
spinlock_t rx_lock, tx_lock;
struct delayed_work schedule;
struct mii_if_info mii;
+ struct mutex control; /* use for hw setting */
struct rtl_ops {
void (*init)(struct r8152 *);
@@ -984,12 +985,16 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
+ mutex_lock(&tp->control);
+
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+ mutex_unlock(&tp->control);
+
return 0;
}
@@ -2139,6 +2144,8 @@ static int rtl8152_set_features(struct net_device *dev,
netdev_features_t changed = features ^ dev->features;
struct r8152 *tp = netdev_priv(dev);
+ mutex_lock(&tp->control);
+
if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
if (features & NETIF_F_HW_VLAN_CTAG_RX)
rtl_rx_vlan_en(tp, true);
@@ -2146,6 +2153,8 @@ static int rtl8152_set_features(struct net_device *dev,
rtl_rx_vlan_en(tp, false);
}
+ mutex_unlock(&tp->control);
+
return 0;
}
@@ -2844,6 +2853,11 @@ static void rtl_work_func_t(struct work_struct *work)
if (test_bit(RTL8152_UNPLUG, &tp->flags))
goto out1;
+ if (!mutex_trylock(&tp->control)) {
+ schedule_delayed_work(&tp->schedule, 0);
+ goto out1;
+ }
+
if (test_bit(RTL8152_LINK_CHG, &tp->flags))
set_carrier(tp);
@@ -2859,6 +2873,8 @@ static void rtl_work_func_t(struct work_struct *work)
if (test_bit(PHY_RESET, &tp->flags))
rtl_phy_reset(tp);
+ mutex_unlock(&tp->control);
+
out1:
usb_autopm_put_interface(tp->intf);
}
@@ -2878,6 +2894,8 @@ static int rtl8152_open(struct net_device *netdev)
goto out;
}
+ mutex_lock(&tp->control);
+
/* The WORK_ENABLE may be set when autoresume occurs */
if (test_bit(WORK_ENABLE, &tp->flags)) {
clear_bit(WORK_ENABLE, &tp->flags);
@@ -2906,6 +2924,8 @@ static int rtl8152_open(struct net_device *netdev)
free_all_mem(tp);
}
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -2926,6 +2946,8 @@ static int rtl8152_close(struct net_device *netdev)
if (res < 0) {
rtl_drop_queued_tx(tp);
} else {
+ mutex_lock(&tp->control);
+
/* The autosuspend may have been enabled and wouldn't
* be disable when autoresume occurs, because the
* netif_running() would be false.
@@ -2938,6 +2960,9 @@ static int rtl8152_close(struct net_device *netdev)
tasklet_disable(&tp->tl);
tp->rtl_ops.down(tp);
tasklet_enable(&tp->tl);
+
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
}
@@ -3162,6 +3187,8 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
{
struct r8152 *tp = usb_get_intfdata(intf);
+ mutex_lock(&tp->control);
+
if (PMSG_IS_AUTO(message))
set_bit(SELECTIVE_SUSPEND, &tp->flags);
else
@@ -3181,6 +3208,8 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
tasklet_enable(&tp->tl);
}
+ mutex_unlock(&tp->control);
+
return 0;
}
@@ -3188,6 +3217,8 @@ static int rtl8152_resume(struct usb_interface *intf)
{
struct r8152 *tp = usb_get_intfdata(intf);
+ mutex_lock(&tp->control);
+
if (!test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
tp->rtl_ops.init(tp);
netif_device_attach(tp->netdev);
@@ -3213,6 +3244,8 @@ static int rtl8152_resume(struct usb_interface *intf)
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
}
+ mutex_unlock(&tp->control);
+
return 0;
}
@@ -3223,9 +3256,13 @@ static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
if (usb_autopm_get_interface(tp->intf) < 0)
return;
+ mutex_lock(&tp->control);
+
wol->supported = WAKE_ANY;
wol->wolopts = __rtl_get_wol(tp);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
}
@@ -3238,9 +3275,13 @@ static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
if (ret < 0)
goto out_set_wol;
+ mutex_lock(&tp->control);
+
__rtl_set_wol(tp, wol->wolopts);
tp->saved_wolopts = wol->wolopts & WAKE_ANY;
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out_set_wol:
@@ -3275,11 +3316,18 @@ static
int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
{
struct r8152 *tp = netdev_priv(netdev);
+ int ret;
if (!tp->mii.mdio_read)
return -EOPNOTSUPP;
- return mii_ethtool_gset(&tp->mii, cmd);
+ mutex_lock(&tp->control);
+
+ ret = mii_ethtool_gset(&tp->mii, cmd);
+
+ mutex_unlock(&tp->control);
+
+ return ret;
}
static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
@@ -3291,8 +3339,12 @@ static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (ret < 0)
goto out;
+ mutex_lock(&tp->control);
+
ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -3452,8 +3504,12 @@ rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
if (ret < 0)
goto out;
+ mutex_lock(&tp->control);
+
ret = tp->rtl_ops.eee_get(tp, edata);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -3470,10 +3526,14 @@ rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata)
if (ret < 0)
goto out;
+ mutex_lock(&tp->control);
+
ret = tp->rtl_ops.eee_set(tp, edata);
if (!ret)
ret = mii_nway_restart(&tp->mii);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -3515,7 +3575,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
break;
case SIOCGMIIREG:
+ mutex_lock(&tp->control);
data->val_out = r8152_mdio_read(tp, data->reg_num);
+ mutex_unlock(&tp->control);
break;
case SIOCSMIIREG:
@@ -3523,7 +3585,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
res = -EPERM;
break;
}
+ mutex_lock(&tp->control);
r8152_mdio_write(tp, data->reg_num, data->val_in);
+ mutex_unlock(&tp->control);
break;
default:
@@ -3716,6 +3780,7 @@ static int rtl8152_probe(struct usb_interface *intf,
goto out;
tasklet_init(&tp->tl, bottom_half, (unsigned long)tp);
+ mutex_init(&tp->control);
INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
netdev->netdev_ops = &rtl8152_netdev_ops;
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists