| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 7 Oct 2014 13:48:47 +0300
From: Daniel Baluta <daniel.baluta@...el.com>
To: Jonathan Cameron <jic23@...nel.org>
Cc: Daniel Baluta <daniel.baluta@...el.com>, linux-iio@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
irina.tirdea@...el.com
Subject: Re: [RFC PATCH 3/8] iio: core: Introduce new MOTION event
On Sat, Oct 4, 2014 at 4:12 PM, Jonathan Cameron <jic23@...nel.org> wrote:
> On 02/10/14 14:43, Daniel Baluta wrote:
>> This is to be used by drivers to signal detection of motion. We also
>> add some possible values for motion as IIO events modifiers:
>> * running
>> * jogging
>> * walking
>> * still
>>
>> These values are supported by Frescale's MMA9553 sensor:
>>
>> http://freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf
>>
>> Signed-off-by: Daniel Baluta <daniel.baluta@...el.com>
>> Signed-off-by: Irina Tirdea <irina.tirdea@...el.com>
> Hmm.. This is the interesting one.
> Not immediately obvious how best to represent this stuff.
>> ---
>> Documentation/ABI/testing/sysfs-bus-iio | 7 +++++++
>> drivers/iio/industrialio-core.c | 4 ++++
>> drivers/iio/industrialio-event.c | 1 +
>> include/linux/iio/types.h | 7 ++++++-
>> 4 files changed, 18 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
>> index d760b02..070346d 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio
>> @@ -808,6 +808,13 @@ Description:
>> number or direction is not specified, applies to all channels of
>> this type.
>>
>> +What: /sys/.../events/in_activity_motion_either_en
>> +KernelVersion: 3.17
>> +Contact: linux-iio@...r.kernel.org
>> +Description:
>> + Enables or disables motion detection. Each time motion is detected an
>> + event of this type will be generated.
>> +
> The either bit seems a bit random but I can see there is no particularly obvious
> alternative.
>
> We really need a clean way of representing a multilevel 'state change' like this.
>
> Looking at the event code, I almost wonder if we would be better using the
> direction element for running, walking etc rather than a modifier.
>
> Having said that we will probably also get devices where this is polled rather than
> event. 'What activity is currently going on?'
> If we take that view modifiers make sense as it becomes
> 'Is the user running?' Perhaps even offering a confidence interval, e.g units as
> percentage
> in_activity_running_input 0..100
> in_activity_walking_input 0..100
> etc
>
This is clear.
> Then our event becomes a state change event (yup we'll need to add that)
So this means we will have a single event type named "state_change"?
Or better "transition".
>
> /events/in_activity_walking_rising_en will then cause events when the percentage
> confidence on a state rises above the provided threshold or goes above it
> (default of 50% perhaps on devices which only report one state).
Then here the attribute name will be:
/events/in_activity_state_change_walking_rising_en
or if we call the event type "transition" this will be:
/events/in_activity_transition_walking_rising_en
I am a little bit confused :).
>
> /events/in_activity_walking_falling_en will do the leaving case.
>
> Note these are just some quick initial thoughts on alternative methods.
> I'll want to think on this more and get responses from more interested
> parties!
>
>> What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
>> KernelVersion: 2.6.35
>> Contact: linux-iio@...r.kernel.org
>> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
>> index 67e8561..e453ef9 100644
>> --- a/drivers/iio/industrialio-core.c
>> +++ b/drivers/iio/industrialio-core.c
>> @@ -92,6 +92,10 @@ static const char * const iio_modifier_names[] = {
>> [IIO_MOD_NORTH_TRUE] = "from_north_true",
>> [IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
>> [IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
>> + [IIO_MOD_RUNNING] = "running",
>> + [IIO_MOD_JOGGING] = "jogging",
>> + [IIO_MOD_WALKING] = "walking",
>> + [IIO_MOD_STILL] = "still",
>> };
>>
>> /* relies on pairs of these shared then separate */
>> diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
>> index 0c1e37e..eca5af2 100644
>> --- a/drivers/iio/industrialio-event.c
>> +++ b/drivers/iio/industrialio-event.c
>> @@ -197,6 +197,7 @@ static const char * const iio_ev_type_text[] = {
>> [IIO_EV_TYPE_ROC] = "roc",
>> [IIO_EV_TYPE_THRESH_ADAPTIVE] = "thresh_adaptive",
>> [IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive",
>> + [IIO_EV_TYPE_MOTION] = "motion",
>> };
>>
>> static const char * const iio_ev_dir_text[] = {
>> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
>> index d58769a..003638d 100644
>> --- a/include/linux/iio/types.h
>> +++ b/include/linux/iio/types.h
>> @@ -60,7 +60,11 @@ enum iio_modifier {
>> IIO_MOD_NORTH_MAGN,
>> IIO_MOD_NORTH_TRUE,
>> IIO_MOD_NORTH_MAGN_TILT_COMP,
>> - IIO_MOD_NORTH_TRUE_TILT_COMP
>> + IIO_MOD_NORTH_TRUE_TILT_COMP,
>> + IIO_MOD_RUNNING,
>> + IIO_MOD_JOGGING,
>> + IIO_MOD_WALKING,
>> + IIO_MOD_STILL,
>> };
>>
>> enum iio_event_type {
>> @@ -69,6 +73,7 @@ enum iio_event_type {
>> IIO_EV_TYPE_ROC,
>> IIO_EV_TYPE_THRESH_ADAPTIVE,
>> IIO_EV_TYPE_MAG_ADAPTIVE,
>> + IIO_EV_TYPE_MOTION,
>> };
>>
>> enum iio_event_info {
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists