Date:	Wed, 08 Oct 2014 09:54:04 +0200
From:	Arnd Bergmann <arnd@...db.de>
To:	linux-arm-kernel@...ts.infradead.org
Cc:	Scott Branden <sbranden@...adcom.com>,
	Christian Daudt <bcm@...thebug.org>,
	Matt Porter <mporter@...aro.org>,
	Russell King <linux@....linux.org.uk>,
	bcm-kernel-feedback-list@...adcom.com,
	Mike Turquette <mturquette@...aro.org>,
	Alex Elder <elder@...aro.org>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Andrew Morton <akpm@...ux-foundation.org>,
	"David S. Miller" <davem@...emloft.net>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Joe Perches <joe@...ches.com>,
	Mauro Carvalho Chehab <m.chehab@...sung.com>,
	Antti Palosaari <crope@....fi>, devicetree@...r.kernel.org,
	Ray Jui <rjui@...adcom.com>, linux-kernel@...r.kernel.org,
	Jonathan Richardson <jonathar@...adcom.com>,
	JD Zheng <jdzheng@...adcom.com>
Subject: Re: [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC

On Tuesday 07 October 2014 22:27:00 Scott Branden wrote:
> From: Jonathan Richardson <jonathar@...adcom.com>
> 
> Adds initial support for the Cygnus SoC based on Broadcom’s iProc series.
> 
> Reviewed-by: Ray Jui <rjui@...adcom.com>
> Reviewed-by: Desmond Liu <desmondl@...adcom.com>
> Reviewed-by: JD (Jiandong) Zheng <jdzheng@...adcom.com>
> Tested-by: Jonathan Richardson <jonathar@...adcom.com>
> Signed-off-by: Scott Branden <sbranden@...adcom.com>
> ---
>  arch/arm/mach-bcm/Kconfig      |   31 ++++++++
>  arch/arm/mach-bcm/Makefile     |    3 +
>  arch/arm/mach-bcm/bcm_cygnus.c |  166 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 200 insertions(+)
>  create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c
> 
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index fc93800..2dd3f78 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -5,6 +5,37 @@ menuconfig ARCH_BCM
>  
>  if ARCH_BCM
>  
> +config ARCH_BCM_IPROC
> +	bool "Broadcom ARMv7 iProc boards" if ARCH_MULTI_V7
> +	select ARM_GIC
> +	select CACHE_L2X0
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
> +	select HAVE_CLK
> +	select CLKSRC_OF
> +	select CLKSRC_MMIO
> +	select GENERIC_CLOCKEVENTS
> +	select ARM_GLOBAL_TIMER
> +	select ARCH_REQUIRE_GPIOLIB
> +	select ARM_AMBA
> +	select PINCTRL
> +	select DEBUG_UART_8250

A lot of these are implied by ARCH_MULTI_V7, just drop them here.

Some others like DEBUG_UART_8250 should remain user-selectable, if
the platform works without them.

> +	help
> +	  This enables support for systems based on Broadcom IPROC architected SoCs.
> +	  The IPROC complex contains one or more ARM CPUs along with common
> +	  core periperals. Application specific SoCs are created by adding a
> +	  uArchitecture containing peripherals outside of the IPROC complex.
> +	  Currently supported SoCs are Cygnus.
> +
> +menu "iProc SoC based Machine types"
> +	depends on ARCH_BCM_IPROC
> +
> +	config ARCH_BCM_CYGNUS
> +		bool "Support Broadcom Cygnus board"
> +		select USB_ARCH_HAS_EHCI if USB_SUPPORT
> +		help
> +		  Support for Broadcom Cygnus SoC.
> +endmenu

I don't think you need per-board config options. The main option
above should be enough.

> +
> +#define CRMU_MAIL_BOX1      0x03024028
> +#define CRMU_SOFT_RESET_CMD 0xFFFFFFFF

Never hardcode physical register locations in source. This should come
from DT, and get moved into a regular 'reset' device driver.

You probably want to use drivers/power/reset/syscon-reboot.c

> +/* CRU_RESET register */
> +static void * __iomem crmu_mail_box1_reg;
> +
> +#ifdef CONFIG_NEON
> +
> +#define CRU_BASE                  0x1800e000
> +#define CRU_SIZE                  0x34
> +#define CRU_CONTROL_OFFSET        0x0
> +#define CRU_PWRDWN_EN_OFFSET      0x4
> +#define CRU_PWRDWN_STATUS_OFFSET  0x8
> +#define CRU_NEON0_HW_RESET  6
> +#define CRU_CLAMP_ON_NEON0  20
> +#define CRU_PWRONIN_NEON0   21
> +#define CRU_PWRONOUT_NEON0  21
> +#define CRU_PWROKIN_NEON0   22
> +#define CRU_PWROKOUT_NEON0  22
> +#define CRU_STATUS_DELAY_NS 500
> +#define CRU_MAX_RETRY_COUNT 10
> +#define CRU_RETRY_INTVL_US  1
> +
> +/* Power up the NEON/VFPv3 block. */
> +static void bcm_cygnus_powerup_neon(void)
> +{
> +	void * __iomem cru_base = ioremap(CRU_BASE, CRU_SIZE);
> +	u32 reg, i;

Same thing here: this should really use the device node for CRU.

Can you describe what the CRU is? Is this specific to NEON or is
it some general-purpose power management unit?

> +static void __init bcm_cygnus_init(void)
> +{
> +	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> +
> +	l2x0_of_init(0, ~0UL);

The l2x0_of_init can be removed now, just move the arguments into the
respective fields of the machine descriptor.

> +	crmu_mail_box1_reg = ioremap(CRMU_MAIL_BOX1, SZ_4);
> +	WARN_ON(!crmu_mail_box1_reg);
> +
> +#ifdef CONFIG_NEON
> +	bcm_cygnus_powerup_neon();
> +#endif
> +}

In general, try to avoid #ifdef, use

	if (IS_ENABLED(CONFIG_NEON))
		bcm_cygnus_powerup_neon();

instead.

> +
> +static const char const *bcm_cygnus_dt_compat[] = {
> +	"brcm,cygnus",
> +	NULL,
> +};
> +
> +DT_MACHINE_START(BCM_CYGNUS_DT, "Broadcom Cygnus SoC")
> +	.init_machine = bcm_cygnus_init,
> +	.map_io = debug_ll_io_init,
> +	.dt_compat = bcm_cygnus_dt_compat,
> +	.restart   = bcm_cygnus_restart
> +MACHINE_END

The map_io pointer is unnecessary, and the restart pointer should get
set by the reset driver. I hope we can find a way to avoid the 
bcm_cygnus_init callback as well.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists