| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1394712342-15778-63-Taiwan-albertk@realtek.com>
Date: Thu, 9 Oct 2014 18:00:26 +0800
From: Hayes Wang <hayeswang@...ltek.com>
To: <netdev@...r.kernel.org>
CC: <nic_swsd@...ltek.com>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>, Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net-next v2 3/3] r8152: add mutex for hw settings
Use the mutex to avoid the settings are interrupted by other ones.
Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
---
drivers/net/usb/r8152.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 63 insertions(+), 1 deletion(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 1d2fc8e..864159e 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -26,7 +26,7 @@
#include <linux/mdio.h>
/* Version Information */
-#define DRIVER_VERSION "v1.06.1 (2014/10/01)"
+#define DRIVER_VERSION "v1.07.0 (2014/10/09)"
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@...ltek.com>"
#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
#define MODULENAME "r8152"
@@ -566,6 +566,7 @@ struct r8152 {
spinlock_t rx_lock, tx_lock;
struct delayed_work schedule;
struct mii_if_info mii;
+ struct mutex control; /* use for hw setting */
struct rtl_ops {
void (*init)(struct r8152 *);
@@ -977,12 +978,16 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
if (ret < 0)
goto out1;
+ mutex_lock(&tp->control);
+
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out1:
return ret;
@@ -2139,6 +2144,8 @@ static int rtl8152_set_features(struct net_device *dev,
if (ret < 0)
goto out;
+ mutex_lock(&tp->control);
+
if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
if (features & NETIF_F_HW_VLAN_CTAG_RX)
rtl_rx_vlan_en(tp, true);
@@ -2146,6 +2153,8 @@ static int rtl8152_set_features(struct net_device *dev,
rtl_rx_vlan_en(tp, false);
}
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -2847,6 +2856,11 @@ static void rtl_work_func_t(struct work_struct *work)
if (test_bit(RTL8152_UNPLUG, &tp->flags))
goto out1;
+ if (!mutex_trylock(&tp->control)) {
+ schedule_delayed_work(&tp->schedule, 0);
+ goto out1;
+ }
+
if (test_bit(RTL8152_LINK_CHG, &tp->flags))
set_carrier(tp);
@@ -2862,6 +2876,8 @@ static void rtl_work_func_t(struct work_struct *work)
if (test_bit(PHY_RESET, &tp->flags))
rtl_phy_reset(tp);
+ mutex_unlock(&tp->control);
+
out1:
usb_autopm_put_interface(tp->intf);
}
@@ -2881,6 +2897,8 @@ static int rtl8152_open(struct net_device *netdev)
goto out;
}
+ mutex_lock(&tp->control);
+
/* The WORK_ENABLE may be set when autoresume occurs */
if (test_bit(WORK_ENABLE, &tp->flags)) {
clear_bit(WORK_ENABLE, &tp->flags);
@@ -2909,6 +2927,8 @@ static int rtl8152_open(struct net_device *netdev)
free_all_mem(tp);
}
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -2929,6 +2949,8 @@ static int rtl8152_close(struct net_device *netdev)
if (res < 0) {
rtl_drop_queued_tx(tp);
} else {
+ mutex_lock(&tp->control);
+
/* The autosuspend may have been enabled and wouldn't
* be disable when autoresume occurs, because the
* netif_running() would be false.
@@ -2941,6 +2963,9 @@ static int rtl8152_close(struct net_device *netdev)
tasklet_disable(&tp->tl);
tp->rtl_ops.down(tp);
tasklet_enable(&tp->tl);
+
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
}
@@ -3165,6 +3190,8 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
{
struct r8152 *tp = usb_get_intfdata(intf);
+ mutex_lock(&tp->control);
+
if (PMSG_IS_AUTO(message))
set_bit(SELECTIVE_SUSPEND, &tp->flags);
else
@@ -3184,6 +3211,8 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
tasklet_enable(&tp->tl);
}
+ mutex_unlock(&tp->control);
+
return 0;
}
@@ -3191,6 +3220,8 @@ static int rtl8152_resume(struct usb_interface *intf)
{
struct r8152 *tp = usb_get_intfdata(intf);
+ mutex_lock(&tp->control);
+
if (!test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
tp->rtl_ops.init(tp);
netif_device_attach(tp->netdev);
@@ -3216,6 +3247,8 @@ static int rtl8152_resume(struct usb_interface *intf)
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
}
+ mutex_unlock(&tp->control);
+
return 0;
}
@@ -3226,9 +3259,13 @@ static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
if (usb_autopm_get_interface(tp->intf) < 0)
return;
+ mutex_lock(&tp->control);
+
wol->supported = WAKE_ANY;
wol->wolopts = __rtl_get_wol(tp);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
}
@@ -3241,9 +3278,13 @@ static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
if (ret < 0)
goto out_set_wol;
+ mutex_lock(&tp->control);
+
__rtl_set_wol(tp, wol->wolopts);
tp->saved_wolopts = wol->wolopts & WAKE_ANY;
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out_set_wol:
@@ -3287,8 +3328,12 @@ int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
if (ret < 0)
goto out;
+ mutex_lock(&tp->control);
+
ret = mii_ethtool_gset(&tp->mii, cmd);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -3304,8 +3349,12 @@ static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (ret < 0)
goto out;
+ mutex_lock(&tp->control);
+
ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -3465,8 +3514,12 @@ rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
if (ret < 0)
goto out;
+ mutex_lock(&tp->control);
+
ret = tp->rtl_ops.eee_get(tp, edata);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -3483,10 +3536,14 @@ rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata)
if (ret < 0)
goto out;
+ mutex_lock(&tp->control);
+
ret = tp->rtl_ops.eee_set(tp, edata);
if (!ret)
ret = mii_nway_restart(&tp->mii);
+ mutex_unlock(&tp->control);
+
usb_autopm_put_interface(tp->intf);
out:
@@ -3528,7 +3585,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
break;
case SIOCGMIIREG:
+ mutex_lock(&tp->control);
data->val_out = r8152_mdio_read(tp, data->reg_num);
+ mutex_unlock(&tp->control);
break;
case SIOCSMIIREG:
@@ -3536,7 +3595,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
res = -EPERM;
break;
}
+ mutex_lock(&tp->control);
r8152_mdio_write(tp, data->reg_num, data->val_in);
+ mutex_unlock(&tp->control);
break;
default:
@@ -3729,6 +3790,7 @@ static int rtl8152_probe(struct usb_interface *intf,
goto out;
tasklet_init(&tp->tl, bottom_half, (unsigned long)tp);
+ mutex_init(&tp->control);
INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
netdev->netdev_ops = &rtl8152_netdev_ops;
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists