| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <87a9552soe.fsf@linux.vnet.ibm.com>
Date: Thu, 09 Oct 2014 20:31:37 +0530
From: "Aneesh Kumar K.V" <aneesh.kumar@...ux.vnet.ibm.com>
To: Michael Neuling <mikey@...ling.org>, greg@...ah.com, arnd@...db.de,
mpe@...erman.id.au, benh@...nel.crashing.org
Cc: mikey@...ling.org, anton@...ba.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...abs.org, jk@...abs.org, imunsie@....ibm.com,
cbe-oss-dev@...ts.ozlabs.org
Subject: Re: [PATCH v4 01/16] powerpc/cell: Move spu_handle_mm_fault() out of cell platform
Michael Neuling <mikey@...ling.org> writes:
> From: Ian Munsie <imunsie@....ibm.com>
>
> Currently spu_handle_mm_fault() is in the cell platform.
>
> This code is generically useful for other non-cell co-processors on powerpc.
>
> This patch moves this function out of the cell platform into arch/powerpc/mm so
> that others may use it.
>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@...ux.vnet.ibm.com>
> Signed-off-by: Ian Munsie <imunsie@....ibm.com>
> Signed-off-by: Michael Neuling <mikey@...ling.org>
> ---
> arch/powerpc/Kconfig | 4 ++++
> arch/powerpc/include/asm/copro.h | 16 ++++++++++++++++
> arch/powerpc/include/asm/spu.h | 5 ++---
> arch/powerpc/mm/Makefile | 1 +
> .../{platforms/cell/spu_fault.c => mm/copro_fault.c} | 14 ++++++--------
> arch/powerpc/platforms/cell/Kconfig | 1 +
> arch/powerpc/platforms/cell/Makefile | 2 +-
> arch/powerpc/platforms/cell/spufs/fault.c | 4 ++--
> 8 files changed, 33 insertions(+), 14 deletions(-)
> create mode 100644 arch/powerpc/include/asm/copro.h
> rename arch/powerpc/{platforms/cell/spu_fault.c => mm/copro_fault.c} (89%)
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 4bc7b62..8f094e9 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -603,6 +603,10 @@ config PPC_SUBPAGE_PROT
> to set access permissions (read/write, readonly, or no access)
> on the 4k subpages of each 64k page.
>
> +config PPC_COPRO_BASE
> + bool
> + default n
> +
> config SCHED_SMT
> bool "SMT (Hyperthreading) scheduler support"
> depends on PPC64 && SMP
> diff --git a/arch/powerpc/include/asm/copro.h b/arch/powerpc/include/asm/copro.h
> new file mode 100644
> index 0000000..51cae85
> --- /dev/null
> +++ b/arch/powerpc/include/asm/copro.h
> @@ -0,0 +1,16 @@
> +/*
> + * Copyright 2014 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#ifndef _ASM_POWERPC_COPRO_H
> +#define _ASM_POWERPC_COPRO_H
> +
> +int copro_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
> + unsigned long dsisr, unsigned *flt);
> +
> +#endif /* _ASM_POWERPC_COPRO_H */
> diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h
> index 37b7ca3..a6e6e2b 100644
> --- a/arch/powerpc/include/asm/spu.h
> +++ b/arch/powerpc/include/asm/spu.h
> @@ -27,6 +27,8 @@
> #include <linux/workqueue.h>
> #include <linux/device.h>
> #include <linux/mutex.h>
> +#include <asm/reg.h>
> +#include <asm/copro.h>
>
> #define LS_SIZE (256 * 1024)
> #define LS_ADDR_MASK (LS_SIZE - 1)
> @@ -277,9 +279,6 @@ void spu_remove_dev_attr(struct device_attribute *attr);
> int spu_add_dev_attr_group(struct attribute_group *attrs);
> void spu_remove_dev_attr_group(struct attribute_group *attrs);
>
> -int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
> - unsigned long dsisr, unsigned *flt);
> -
> /*
> * Notifier blocks:
> *
> diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
> index d0130ff..325e861 100644
> --- a/arch/powerpc/mm/Makefile
> +++ b/arch/powerpc/mm/Makefile
> @@ -34,3 +34,4 @@ obj-$(CONFIG_TRANSPARENT_HUGEPAGE) += hugepage-hash64.o
> obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
> obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
> obj-$(CONFIG_HIGHMEM) += highmem.o
> +obj-$(CONFIG_PPC_COPRO_BASE) += copro_fault.o
> diff --git a/arch/powerpc/platforms/cell/spu_fault.c b/arch/powerpc/mm/copro_fault.c
> similarity index 89%
> rename from arch/powerpc/platforms/cell/spu_fault.c
> rename to arch/powerpc/mm/copro_fault.c
> index 641e727..ba7df14 100644
> --- a/arch/powerpc/platforms/cell/spu_fault.c
> +++ b/arch/powerpc/mm/copro_fault.c
> @@ -1,5 +1,5 @@
> /*
> - * SPU mm fault handler
> + * CoProcessor (SPU/AFU) mm fault handler
> *
> * (C) Copyright IBM Deutschland Entwicklung GmbH 2007
> *
> @@ -23,16 +23,14 @@
> #include <linux/sched.h>
> #include <linux/mm.h>
> #include <linux/export.h>
> -
> -#include <asm/spu.h>
> -#include <asm/spu_csa.h>
> +#include <asm/reg.h>
>
> /*
> * This ought to be kept in sync with the powerpc specific do_page_fault
> * function. Currently, there are a few corner cases that we haven't had
> * to handle fortunately.
> */
> -int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
> +int copro_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
> unsigned long dsisr, unsigned *flt)
> {
> struct vm_area_struct *vma;
> @@ -58,12 +56,12 @@ int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
> goto out_unlock;
> }
>
> - is_write = dsisr & MFC_DSISR_ACCESS_PUT;
> + is_write = dsisr & DSISR_ISSTORE;
> if (is_write) {
> if (!(vma->vm_flags & VM_WRITE))
> goto out_unlock;
> } else {
> - if (dsisr & MFC_DSISR_ACCESS_DENIED)
> + if (dsisr & DSISR_PROTFAULT)
> goto out_unlock;
> if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
> goto out_unlock;
> @@ -91,4 +89,4 @@ out_unlock:
> up_read(&mm->mmap_sem);
> return ret;
> }
> -EXPORT_SYMBOL_GPL(spu_handle_mm_fault);
> +EXPORT_SYMBOL_GPL(copro_handle_mm_fault);
> diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
> index 9978f59..870b6db 100644
> --- a/arch/powerpc/platforms/cell/Kconfig
> +++ b/arch/powerpc/platforms/cell/Kconfig
> @@ -86,6 +86,7 @@ config SPU_FS_64K_LS
> config SPU_BASE
> bool
> default n
> + select PPC_COPRO_BASE
>
> config CBE_RAS
> bool "RAS features for bare metal Cell BE"
> diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
> index fe053e7..2d16884 100644
> --- a/arch/powerpc/platforms/cell/Makefile
> +++ b/arch/powerpc/platforms/cell/Makefile
> @@ -20,7 +20,7 @@ spu-manage-$(CONFIG_PPC_CELL_COMMON) += spu_manage.o
>
> obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \
> spu_notify.o \
> - spu_syscalls.o spu_fault.o \
> + spu_syscalls.o \
> $(spu-priv1-y) \
> $(spu-manage-y) \
> spufs/
> diff --git a/arch/powerpc/platforms/cell/spufs/fault.c b/arch/powerpc/platforms/cell/spufs/fault.c
> index 8cb6260..e45894a 100644
> --- a/arch/powerpc/platforms/cell/spufs/fault.c
> +++ b/arch/powerpc/platforms/cell/spufs/fault.c
> @@ -138,7 +138,7 @@ int spufs_handle_class1(struct spu_context *ctx)
> if (ctx->state == SPU_STATE_RUNNABLE)
> ctx->spu->stats.hash_flt++;
>
> - /* we must not hold the lock when entering spu_handle_mm_fault */
> + /* we must not hold the lock when entering copro_handle_mm_fault */
> spu_release(ctx);
>
> access = (_PAGE_PRESENT | _PAGE_USER);
> @@ -149,7 +149,7 @@ int spufs_handle_class1(struct spu_context *ctx)
>
> /* hashing failed, so try the actual fault handler */
> if (ret)
> - ret = spu_handle_mm_fault(current->mm, ea, dsisr, &flt);
> + ret = copro_handle_mm_fault(current->mm, ea, dsisr, &flt);
>
> /*
> * This is nasty: we need the state_mutex for all the bookkeeping even
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists