[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Fri, 10 Oct 2014 11:03:03 +0200
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Chanwoo Choi <cw00.choi@...sung.com>
Cc: MyungJoo Ham <myungjoo.ham@...sung.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>, linux-kernel@...r.kernel.org,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
stable@...r.kernel.org
Subject: Re: [PATCH fixes 2/2] extcon: max77693: Fix always masked MUIC
interrupts
On piÄ…, 2014-10-10 at 17:45 +0900, Chanwoo Choi wrote:
> On 10/10/2014 05:22 PM, Krzysztof Kozlowski wrote:
> > All interrupts coming from MUIC were ignored because interrupt source
> > register was masked.
> >
> > The Maxim 77693 has a "interrupt source" - a separate register and interrupts
> > which give information about PMIC block triggering the individual
> > interrupt (charger, topsys, MUIC, flash LED).
> >
> > By default bootloader could initialize this register to "mask all"
> > value. In such case (observed on Trats2 board) MUIC interrupts won't be
> > generated regardless of their mask status. Regmap irq chip was unmasking
> > individual MUIC interrupts but the source was masked
> >
> > Before introducing regmap irq chip this interrupt source was unmasked,
> > read and acked. Reading and acking is not necessary but unmasking is. Do
> > it in extcon driver.
> >
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> > Cc: <stable@...r.kernel.org>
> > Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
> > ---
> > drivers/extcon/extcon-max77693.c | 16 ++++++++++++++++
> > include/linux/mfd/max77693-private.h | 5 +++++
> > 2 files changed, 21 insertions(+)
> >
> > diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
> > index 490e27475bac..d3adacf3187f 100644
> > --- a/drivers/extcon/extcon-max77693.c
> > +++ b/drivers/extcon/extcon-max77693.c
> > @@ -1176,6 +1176,22 @@ static int max77693_muic_probe(struct platform_device *pdev)
> > }
> > }
> >
> > + if (i) {
> > + /*
> > + * i>0, at least one MUIC interrupt requested so need to unmask
> > + * MUIC interrupt in INTSRC register. Without that MUIC
> > + * interrupts will not be reported.
> > + */
> > + ret = regmap_update_bits(max77693->regmap,
> > + MAX77693_PMIC_REG_INTSRC_MASK, SRC_IRQ_MUIC,
> > + ~SRC_IRQ_MUIC);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "Could not unmask MUIC interrupt in INTSRC: %d\n",
> > + ret);
> > + return ret;
> > + }
> > + }
> > +
>
> No,
> The extcon-max77693 driver cannot enable IRQ_CHARGER/TOP/FLASH
> because MAX77693_PMIC_REG_INTSRC_MASK register is common register of MAX77693.
>
> The IRQ_CHARGER/TOP/FLASH of MAX77693_PMIC_REG_INTSRC_MASK register should be enabled
> in drivers/mfd/max77693.c.
The code above unmasks only SRC_IRQ_MUIC. Other bits are not touched.
Why do you think that other IRQs will be enabled?
Best regards,
Krzysztof
>
> > /* Initialize extcon device */
> > info->edev = devm_extcon_dev_allocate(&pdev->dev,
> > max77693_extcon_cable);
> > diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
> > index e1b2b61285b9..4f1a80b66ecf 100644
> > --- a/include/linux/mfd/max77693-private.h
> > +++ b/include/linux/mfd/max77693-private.h
> > @@ -438,6 +438,11 @@ enum max77693_irq_source {
> > MAX77693_IRQ_GROUP_NR,
> > };
> >
> > +#define SRC_IRQ_CHARGER BIT(0)
> > +#define SRC_IRQ_TOP BIT(1)
> > +#define SRC_IRQ_FLASH BIT(2)
> > +#define SRC_IRQ_MUIC BIT(3)
> > +
> > #define LED_IRQ_FLED2_OPEN BIT(0)
> > #define LED_IRQ_FLED2_SHORT BIT(1)
> > #define LED_IRQ_FLED1_OPEN BIT(2)
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists