| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <543CE378.30801@samsung.com>
Date: Tue, 14 Oct 2014 10:48:56 +0200
From: Krzysztof Kozłowski <k.kozlowski@...sung.com>
To: Thomas Abraham <thomas.ab@...sung.com>, lgirdwood@...il.com,
broonie@...nel.org
Cc: kgene.kim@...sung.com, linux-kernel@...r.kernel.org,
lee.jones@...aro.org
Subject: Re: [PATCH] regulator: s2mps11: add support for S2MPS15 regulators
On 14.10.2014 10:17, Thomas Abraham wrote:
> The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
> 27 LDO and 10 Buck regulators and allows programming these regulators via a
> I2C interface. This patch adds initial support for LDO/Buck regulators of
> S2MPS15 PMIC.
>
> Signed-off-by: Thomas Abraham <thomas.ab@...sung.com>
Just two questions/ideas:
1. No specific steps for suspend?
2. Maybe add S2MPS15 to MODULE_DESCRIPTION and Kconfig?
Anyway rest looks fine.
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Best regards,
Krzysztof
> ---
> drivers/regulator/s2mps11.c | 133 +++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 133 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
> index adab82d..e176fbb 100644
> --- a/drivers/regulator/s2mps11.c
> +++ b/drivers/regulator/s2mps11.c
> @@ -31,6 +31,7 @@
> #include <linux/mfd/samsung/core.h>
> #include <linux/mfd/samsung/s2mps11.h>
> #include <linux/mfd/samsung/s2mps14.h>
> +#include <linux/mfd/samsung/s2mps15.h>
> #include <linux/mfd/samsung/s2mpu02.h>
>
> struct s2mps11_info {
> @@ -529,6 +530,133 @@ static const struct regulator_desc s2mps14_regulators[] = {
> regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV),
> };
>
> +static struct regulator_ops s2mps15_reg_ldo_ops = {
> + .list_voltage = regulator_list_voltage_linear_range,
> + .map_voltage = regulator_map_voltage_linear_range,
> + .is_enabled = regulator_is_enabled_regmap,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> +};
> +
> +static struct regulator_ops s2mps15_reg_buck_ops = {
> + .list_voltage = regulator_list_voltage_linear_range,
> + .map_voltage = regulator_map_voltage_linear_range,
> + .is_enabled = regulator_is_enabled_regmap,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .set_voltage_time_sel = regulator_set_voltage_time_sel,
> +};
> +
> +#define regulator_desc_s2mps15_ldo(num, range) { \
> + .name = "LDO"#num, \
> + .id = S2MPS15_LDO##num, \
> + .ops = &s2mps15_reg_ldo_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .owner = THIS_MODULE, \
> + .linear_ranges = range, \
> + .n_linear_ranges = ARRAY_SIZE(range), \
> + .n_voltages = S2MPS15_LDO_N_VOLTAGES, \
> + .vsel_reg = S2MPS15_REG_L1CTRL + num - 1, \
> + .vsel_mask = S2MPS15_LDO_VSEL_MASK, \
> + .enable_reg = S2MPS15_REG_L1CTRL + num - 1, \
> + .enable_mask = S2MPS15_ENABLE_MASK \
> +}
> +
> +#define regulator_desc_s2mps15_buck(num, range) { \
> + .name = "BUCK"#num, \
> + .id = S2MPS15_BUCK##num, \
> + .ops = &s2mps15_reg_buck_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .owner = THIS_MODULE, \
> + .linear_ranges = range, \
> + .n_linear_ranges = ARRAY_SIZE(range), \
> + .ramp_delay = 12500, \
> + .n_voltages = S2MPS15_BUCK_N_VOLTAGES, \
> + .vsel_reg = S2MPS15_REG_B1CTRL2 + ((num - 1) * 2), \
> + .vsel_mask = S2MPS15_BUCK_VSEL_MASK, \
> + .enable_reg = S2MPS15_REG_B1CTRL1 + ((num - 1) * 2), \
> + .enable_mask = S2MPS14_ENABLE_MASK \
> +}
> +
> +/* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */
> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = {
> + REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000),
> +};
> +
> +/* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */
> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = {
> + REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000),
> +};
> +
> +/* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */
> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
> + REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500),
> +};
> +
> +/* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
> + REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000),
> +};
> +
> +/* voltage range for s2mps15 LDO 1 */
> +static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
> + REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500),
> +};
> +
> +/* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
> +static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
> + REGULATOR_LINEAR_RANGE(500000, 0x10, 0xb0, 6250),
> +};
> +
> +/* voltage range for s2mps15 BUCK 8, 9 and 10 */
> +static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
> + REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500),
> +};
> +
> +static const struct regulator_desc s2mps15_regulators[] = {
> + regulator_desc_s2mps15_ldo(1, s2mps15_ldo_voltage_ranges5),
> + regulator_desc_s2mps15_ldo(2, s2mps15_ldo_voltage_ranges2),
> + regulator_desc_s2mps15_ldo(3, s2mps15_ldo_voltage_ranges1),
> + regulator_desc_s2mps15_ldo(4, s2mps15_ldo_voltage_ranges3),
> + regulator_desc_s2mps15_ldo(5, s2mps15_ldo_voltage_ranges1),
> + regulator_desc_s2mps15_ldo(6, s2mps15_ldo_voltage_ranges2),
> + regulator_desc_s2mps15_ldo(7, s2mps15_ldo_voltage_ranges4),
> + regulator_desc_s2mps15_ldo(8, s2mps15_ldo_voltage_ranges4),
> + regulator_desc_s2mps15_ldo(9, s2mps15_ldo_voltage_ranges4),
> + regulator_desc_s2mps15_ldo(10, s2mps15_ldo_voltage_ranges4),
> + regulator_desc_s2mps15_ldo(11, s2mps15_ldo_voltage_ranges3),
> + regulator_desc_s2mps15_ldo(12, s2mps15_ldo_voltage_ranges3),
> + regulator_desc_s2mps15_ldo(13, s2mps15_ldo_voltage_ranges3),
> + regulator_desc_s2mps15_ldo(14, s2mps15_ldo_voltage_ranges2),
> + regulator_desc_s2mps15_ldo(15, s2mps15_ldo_voltage_ranges1),
> + regulator_desc_s2mps15_ldo(16, s2mps15_ldo_voltage_ranges1),
> + regulator_desc_s2mps15_ldo(17, s2mps15_ldo_voltage_ranges2),
> + regulator_desc_s2mps15_ldo(18, s2mps15_ldo_voltage_ranges1),
> + regulator_desc_s2mps15_ldo(19, s2mps15_ldo_voltage_ranges2),
> + regulator_desc_s2mps15_ldo(20, s2mps15_ldo_voltage_ranges1),
> + regulator_desc_s2mps15_ldo(21, s2mps15_ldo_voltage_ranges2),
> + regulator_desc_s2mps15_ldo(22, s2mps15_ldo_voltage_ranges3),
> + regulator_desc_s2mps15_ldo(23, s2mps15_ldo_voltage_ranges1),
> + regulator_desc_s2mps15_ldo(24, s2mps15_ldo_voltage_ranges2),
> + regulator_desc_s2mps15_ldo(25, s2mps15_ldo_voltage_ranges2),
> + regulator_desc_s2mps15_ldo(26, s2mps15_ldo_voltage_ranges3),
> + regulator_desc_s2mps15_ldo(27, s2mps15_ldo_voltage_ranges1),
> + regulator_desc_s2mps15_buck(1, s2mps15_buck_voltage_ranges1),
> + regulator_desc_s2mps15_buck(2, s2mps15_buck_voltage_ranges1),
> + regulator_desc_s2mps15_buck(3, s2mps15_buck_voltage_ranges1),
> + regulator_desc_s2mps15_buck(4, s2mps15_buck_voltage_ranges1),
> + regulator_desc_s2mps15_buck(5, s2mps15_buck_voltage_ranges1),
> + regulator_desc_s2mps15_buck(6, s2mps15_buck_voltage_ranges1),
> + regulator_desc_s2mps15_buck(7, s2mps15_buck_voltage_ranges1),
> + regulator_desc_s2mps15_buck(8, s2mps15_buck_voltage_ranges2),
> + regulator_desc_s2mps15_buck(9, s2mps15_buck_voltage_ranges2),
> + regulator_desc_s2mps15_buck(10, s2mps15_buck_voltage_ranges2),
> +};
> +
> static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
> struct regulator_dev *rdev)
> {
> @@ -835,6 +963,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
> s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
> regulators = s2mps14_regulators;
> break;
> + case S2MPS15X:
> + s2mps11->rdev_num = ARRAY_SIZE(s2mps15_regulators);
> + regulators = s2mps15_regulators;
> + break;
> case S2MPU02:
> s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
> regulators = s2mpu02_regulators;
> @@ -928,6 +1060,7 @@ out:
> static const struct platform_device_id s2mps11_pmic_id[] = {
> { "s2mps11-pmic", S2MPS11X},
> { "s2mps14-pmic", S2MPS14X},
> + { "s2mps15-pmic", S2MPS15X},
> { "s2mpu02-pmic", S2MPU02},
> { },
> };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists