| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20141014154151.GB10067@roeck-us.net>
Date: Tue, 14 Oct 2014 08:41:51 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Octavian Purdila <octavian.purdila@...el.com>
Cc: wsa@...-dreams.de, johan@...nel.org, linux-i2c@...r.kernel.org,
linux-api@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH v2 3/3] i2c: show and change bus frequency via sysfs
On Tue, Oct 14, 2014 at 05:48:14PM +0300, Octavian Purdila wrote:
> This patch adds three new sysfs files: bus_frequency,
> bus_min_frequency and bus_max_frequency which allows the user to view
> or change the bus frequency on a per bus level.
>
> This is required for the case where multiple busses have the same
> adapter driver and where a module parameter does not allow controlling
> the bus speed individually (e.g. USB I2C adapters).
>
> Signed-off-by: Octavian Purdila <octavian.purdila@...el.com>
> ---
> Documentation/ABI/testing/sysfs-bus-i2c | 30 +++++++++++
> drivers/i2c/i2c-core.c | 94 +++++++++++++++++++++++++++++++++
> include/linux/i2c.h | 16 ++++++
> 3 files changed, 140 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-i2c b/Documentation/ABI/testing/sysfs-bus-i2c
> index 8075585..4a7f8e7 100644
> --- a/Documentation/ABI/testing/sysfs-bus-i2c
> +++ b/Documentation/ABI/testing/sysfs-bus-i2c
> @@ -43,3 +43,33 @@ Contact: linux-i2c@...r.kernel.org
> Description:
> An i2c device attached to bus X that is enumerated via
> ACPI. Y is the ACPI device name and its format is "%s".
> +
> +What: /sys/bus/i2c/devices/i2c-X/bus_frequency
> +KernelVersion: 3.19
> +Contact: linux-i2c@...r.kernel.org
> +Description:
> + The current bus frequency for bus X. Can be updated if
> + the bus supports it. The unit is HZ and format is
> + "%d\n".
> + If the bus does not support changing the frequency
> + then this entry will be read-only.
> + If the bus does not support showing the frequency than
> + this entry will not be visible.
> + When updating the bus frequency that value must be in
> + the range defined by bus_frequency_min and
> + bus_frequency_max otherwise writing to this entry will
> + fail with -EINVAL.
> + The bus may not support all of the frequencies in the
> + min-max range and may round the frequency to the
> + closest supported one. The user must read the entry
> + after writing it to retrieve the actual set frequency.
> +
> +What: /sys/bus/i2c/devices/i2c-X/bus_min_frequency
> +What: /sys/bus/i2c/devices/i2c-X/bus_max_frequency
> +KernelVersion: 3.19
> +Contact: linux-i2c@...r.kernel.org
> +Description:
> + Minimum and maximum frequencies for bus X. The unit is
> + HZ and format is "%d\n".
> + If the bus does not support changing the frequency
> + these entries will not be visible.
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index 632057a..ab77f7f 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -940,15 +940,101 @@ static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
> static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
> i2c_sysfs_delete_device);
>
> +static ssize_t
> +i2c_sysfs_freq_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct i2c_adapter *adap = to_i2c_adapter(dev);
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", adap->freq);
> +}
> +
> +static ssize_t
> +i2c_sysfs_freq_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_adapter *adap = to_i2c_adapter(dev);
> + unsigned int freq;
> + int ret;
> +
> + if (kstrtouint(buf, 0, &freq) || freq < adap->min_freq ||
> + freq > adap->max_freq)
> + return -EINVAL;
> +
> + i2c_lock_adapter(adap);
> + ret = adap->set_freq(adap, &freq);
> + i2c_unlock_adapter(adap);
> +
> + if (ret)
> + return ret;
> +
> + adap->freq = freq;
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR(bus_frequency, S_IRUGO, i2c_sysfs_freq_show,
> + i2c_sysfs_freq_store);
Consider using DEVICE_ATTR_RO here. Also, extra empty line.
> +
> +
> +static ssize_t
> +i2c_sysfs_min_freq_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct i2c_adapter *adap = to_i2c_adapter(dev);
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", adap->min_freq);
> +}
> +
> +static DEVICE_ATTR(bus_min_frequency, S_IRUGO, i2c_sysfs_min_freq_show, NULL);
> +
Consider using DEVICE_ATTR_RO.
> +static ssize_t
> +i2c_sysfs_max_freq_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct i2c_adapter *adap = to_i2c_adapter(dev);
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", adap->max_freq);
> +}
> +
> +static DEVICE_ATTR(bus_max_frequency, S_IRUGO, i2c_sysfs_max_freq_show, NULL);
> +
Consider using DEVICE_ATTR_RO.
Overall, it seems to me that the bus_ in front of the attrribute names
is really not necessary. The attributes are attached to the adapter, so it
should be obvious that the attributes describe the adapter (=bus) frequency and
not some other frequency.
> +umode_t i2c_adapter_visible_attr(struct kobject *kobj,
> + struct attribute *attr, int idx)
static umode_t
> +{
> + struct device *dev = container_of(kobj, struct device, kobj);
> + struct i2c_adapter *adap = to_i2c_adapter(dev);
> + umode_t mode = attr->mode;
> +
> + if (attr == &dev_attr_bus_min_frequency.attr)
> + return adap->min_freq ? mode : 0;
> +
> + if (attr == &dev_attr_bus_max_frequency.attr)
> + return adap->max_freq ? mode : 0;
> +
> + if (attr == &dev_attr_bus_frequency.attr) {
> + if (adap->set_freq)
> + mode |= S_IWUSR;
> + return adap->freq ? mode : 0;
Personally, I would make all those attributes only visible if the adapter
supports setting the frquency, and not bother with other conditions,
to keep things simple. Not a strong call, though.
> + }
> +
> + return mode;
> +}
> +
> +
extra empty line
> static struct attribute *i2c_adapter_attrs[] = {
> &dev_attr_name.attr,
> &dev_attr_new_device.attr,
> &dev_attr_delete_device.attr,
> + &dev_attr_bus_frequency.attr,
> + &dev_attr_bus_min_frequency.attr,
> + &dev_attr_bus_max_frequency.attr,
> NULL
> };
>
> static struct attribute_group i2c_adapter_attr_group = {
> .attrs = i2c_adapter_attrs,
> + .is_visible = i2c_adapter_visible_attr,
> };
>
> static const struct attribute_group *i2c_adapter_attr_groups[] = {
> @@ -1262,6 +1348,14 @@ int i2c_add_adapter(struct i2c_adapter *adapter)
> struct device *dev = &adapter->dev;
> int id;
>
> + if (adapter->set_freq) {
> + if (!adapter->freq || !adapter->min_freq || !adapter->max_freq)
> + return -EINVAL;
> + } else {
> + if (adapter->min_freq || adapter->max_freq)
> + return -EINVAL;
> + }
> +
> if (dev->of_node) {
> id = of_alias_get_id(dev->of_node, "i2c");
> if (id >= 0) {
> diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> index 36041e2..3482b09 100644
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -431,6 +431,17 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap);
> * usb->interface->dev, platform_device->dev etc.)
> * @name: name of this i2c bus
> * @bus_recovery_info: see struct i2c_bus_recovery_info. Optional.
> + * @set_freq: set the bus frequency (in HZ) and returns the actual set
> + * value. Since not all the freqeuncies in the min - max interval
> + * may be valid the driver may round the frequency to the closest
> + * supported one. Optional but must be set if min_freq or
> + * max_freq is set.
> + * @min_freq: minimum bus frequency. Optional but must be set if
> + * set_freq is set.
> + * @max_freq: maximum bus frequency. Optional but must be set if
> + * set_freq is set.
> + * @freq: initial bus frequency. Optional but must be set if set_freq
> + * is set.
> */
> struct i2c_adapter {
> struct module *owner;
> @@ -438,6 +449,11 @@ struct i2c_adapter {
> const struct i2c_algorithm *algo; /* the algorithm to access the bus */
> void *algo_data;
>
> + unsigned int freq;
> + unsigned int min_freq;
> + unsigned int max_freq;
> + int (*set_freq)(struct i2c_adapter *a, unsigned int *freq);
> +
> /* data fields that are valid for all devices */
> struct rt_mutex bus_lock;
>
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists