| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <543E30E0.3060203@hp.com>
Date: Wed, 15 Oct 2014 16:31:28 +0800
From: "Li, ZhenHua" <zhen-hual@...com>
To: Takao Indoh <indou.takao@...fujitsu.com>
CC: bhelgaas@...gle.com, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, linda.knippers@...com,
jerry.hoemann@...com, lisa.mitchell@...com,
alexander.duyck@...il.com, rwright@...com
Subject: Re: [PATCH 1/1] pci: fix dmar fault for kdump kernel
I still think resetting the devices is necessary. Reading your original
mails , I think reason 2 you mentioned, resetting the devices in the
first kernel, may be a good solution.
Well, I am now working on Bill's patch that you mentioned. As it is not
accepted yet, I will create a new version for latest stable kernel 3.17.
Thanks
Zhenhua
On 10/15/2014 04:14 PM, Takao Indoh wrote:
> (2014/10/14 18:34), Li, ZhenHua wrote:
>> I tested on the latest stable version 3.17, it works well.
>>
>> On 10/10/2014 03:13 PM, Li, Zhen-Hua wrote:
>>> On a HP system with Intel vt-d supported and many PCI devices on it,
>>> when kernel crashed and the kdump kernel boots with intel_iommu=on,
>>> there may be some unexpected DMA requests on this adapter, which will
>>> cause DMA Remapping faults like:
>>> dmar: DRHD: handling fault status reg 102
>>> dmar: DMAR:[DMA Read] Request device [41:00.0] fault addr fff81000
>>> DMAR:[fault reason 01] Present bit in root entry is clear
>>>
>>> This bug may happen on *any* PCI device.
>>> Analysis for this bug:
>>>
>>> The present bit is set in this function:
>>>
>>> static struct context_entry * device_to_context_entry(
>>> struct intel_iommu *iommu, u8 bus, u8 devfn)
>>> {
>>> ......
>>> set_root_present(root);
>>> ......
>>> }
>>>
>>> Calling tree:
>>> device driver
>>> intel_alloc_coherent
>>> __intel_map_single
>>> domain_context_mapping
>>> domain_context_mapping_one
>>> device_to_context_entry
>>>
>>> This means, the present bit in root entry will not be set until the device
>>> driver is loaded.
>>>
>>> But in the kdump kernel, hardware devices are not aware that control has
>>> transferred to the second kernel, and those drivers must initialize again.
>>> Consequently there may be unexpected DMA requests from devices activity
>>> initiated in the first kernel leading to the DMA Remapping errors in the
>>> second kernel.
>>>
>>> To fix this DMAR fault, we need to reset the bus that this device on. Reset
>>> the device itself does not work.
>>>
>>> A patch for this bug that has been sent before:
>>> https://lkml.org/lkml/2014/9/30/55
>>> As in discussion, this bug may happen on *any* device, so we need to reset all
>>> pci devices.
>>>
>>> There was an original version(Takao Indoh) that resets the pcie devices:
>>> https://lkml.org/lkml/2013/5/14/9
>
> As far as I can remember, the original patch was nacked by
> the following reasons:
>
> 1) On sparc, the IOMMU is initialized before PCI devices are enumerated,
> so there would still be a window where ongoing DMA could cause an
> IOMMU error.
>
> 2) Basically Bjorn is thinking device reset should be done in the
> 1st kernel before jumping into 2nd kernel.
>
> And Bill Sumner proposed another idea.
> http://comments.gmane.org/gmane.linux.kernel.iommu/4828
> I don't know the current status of this patch, but I think Jerry Hoemann
> is working on this.
>
> Thanks,
> Takao Indoh
>
>
>>>
>>> Update of this new version, comparing with Takao Indoh's version:
>>> Add support for legacy PCI devices.
>>> Use pci_try_reset_bus instead of do_downstream_device_reset in original version
>>>
>>> Randy Wright corrects some misunderstanding in this description.
>>>
>>> Signed-off-by: Li, Zhen-Hua <zhen-hual@...com>
>>> Signed-off-by: Takao Indoh <indou.takao@...fujitsu.com>
>>> Signed-off-by: Randy Wright <rwright@...com>
>>> ---
>>> drivers/pci/pci.c | 84 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 84 insertions(+)
>>>
>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>> index 2c9ac70..8cb146c 100644
>>> --- a/drivers/pci/pci.c
>>> +++ b/drivers/pci/pci.c
>>> @@ -23,6 +23,7 @@
>>> #include <linux/device.h>
>>> #include <linux/pm_runtime.h>
>>> #include <linux/pci_hotplug.h>
>>> +#include <linux/crash_dump.h>
>>> #include <asm-generic/pci-bridge.h>
>>> #include <asm/setup.h>
>>> #include "pci.h"
>>> @@ -4423,6 +4424,89 @@ void __weak pci_fixup_cardbus(struct pci_bus *bus)
>>> }
>>> EXPORT_SYMBOL(pci_fixup_cardbus);
>>>
>>> +/*
>>> + * Return true if dev is PCI root port or downstream port whose child is PCI
>>> + * endpoint except VGA device.
>>> + */
>>> +static int __pci_dev_need_reset(struct pci_dev *dev)
>>> +{
>>> + struct pci_bus *subordinate;
>>> + struct pci_dev *child;
>>> +
>>> + if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
>>> + return 0;
>>> +
>>> + if (pci_is_pcie(dev)) {
>>> + if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
>>> + (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM))
>>> + return 0;
>>> + }
>>> +
>>> + subordinate = dev->subordinate;
>>> + list_for_each_entry(child, &subordinate->devices, bus_list) {
>>> + /* Don't reset switch, bridge, VGA device */
>>> + if ((child->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
>>> + ((child->class >> 16) == PCI_BASE_CLASS_BRIDGE) ||
>>> + ((child->class >> 16) == PCI_BASE_CLASS_DISPLAY))
>>> + return 0;
>>> +
>>> + if (pci_is_pcie(child)) {
>>> + if ((pci_pcie_type(child) == PCI_EXP_TYPE_UPSTREAM) ||
>>> + (pci_pcie_type(child) == PCI_EXP_TYPE_PCI_BRIDGE))
>>> + return 0;
>>> + }
>>> + }
>>> +
>>> + return 1;
>>> +}
>>> +
>>> +struct pci_dev_reset_entry {
>>> + struct list_head list;
>>> + struct pci_dev *dev;
>>> +};
>>> +int __init pci_reset_endpoints(void)
>>> +{
>>> + struct pci_dev *dev = NULL;
>>> + struct pci_dev_reset_entry *pdev_entry, *tmp;
>>> + struct pci_bus *subordinate = NULL;
>>> + int has_it;
>>> +
>>> + LIST_HEAD(pdev_list);
>>> +
>>> + if (likely(!is_kdump_kernel()))
>>> + return 0;
>>> +
>>> + for_each_pci_dev(dev) {
>>> + subordinate = dev->subordinate;
>>> + if (!subordinate || list_empty(&subordinate->devices))
>>> + continue;
>>> +
>>> + has_it = 0;
>>> + list_for_each_entry(pdev_entry, &pdev_list, list) {
>>> + if (dev == pdev_entry->dev) {
>>> + has_it = 1;
>>> + break;
>>> + }
>>> + }
>>> + if (has_it)
>>> + continue;
>>> +
>>> + if (__pci_dev_need_reset(dev)) {
>>> + pdev_entry = kmalloc(sizeof(*pdev_entry), GFP_KERNEL);
>>> + pdev_entry->dev = dev;
>>> + list_add(&pdev_entry->list, &pdev_list);
>>> + }
>>> + }
>>> +
>>> + list_for_each_entry_safe(pdev_entry, tmp, &pdev_list, list) {
>>> + pci_try_reset_bus(pdev_entry->dev->subordinate);
>>> + kfree(pdev_entry);
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +fs_initcall_sync(pci_reset_endpoints);
>>> +
>>> static int __init pci_setup(char *str)
>>> {
>>> while (str) {
>>>
>>
>>
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists