| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1413479495-14206-9-git-send-email-soren.brinkmann@xilinx.com>
Date: Thu, 16 Oct 2014 10:11:35 -0700
From: Soren Brinkmann <soren.brinkmann@...inx.com>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: Sören Brinkmann <soren.brinkmann@...inx.com>,
Michal Simek <michal.simek@...inx.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Steffen Trumtrar <s.trumtrar@...gutronix.de>
Subject: [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information
Add pinctrl descriptions to the zc702 and zc706 device trees.
Signed-off-by: Soren Brinkmann <soren.brinkmann@...inx.com>
---
arch/arm/boot/dts/zynq-7000.dtsi | 8 ++-
arch/arm/boot/dts/zynq-zc702.dts | 147 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/zynq-zc706.dts | 126 +++++++++++++++++++++++++++++++++
3 files changed, 280 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 24036c440440..37d7fe36a129 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -238,7 +238,7 @@
slcr: slcr@...00000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "xlnx,zynq-slcr", "syscon";
+ compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
reg = <0xF8000000 0x1000>;
ranges;
clkc: clkc@100 {
@@ -259,6 +259,12 @@
"dbg_trc", "dbg_apb";
reg = <0x100 0x100>;
};
+
+ pinctrl0: pinctrl@700 {
+ compatible = "xlnx,pinctrl-zynq";
+ reg = <0x700 0x200>;
+ syscon = <&slcr>;
+ };
};
dmac_s: dmac@...03000 {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 94e2cda6f9b6..b3ec4d26a9b3 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -40,21 +40,32 @@
&can0 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_default>;
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <ðernet_phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem0_default>;
ethernet_phy: ethernet-phy@7 {
reg = <7>;
};
};
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
&i2c0 {
status = "okay";
clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
i2cswitch@74 {
compatible = "nxp,pca9548";
@@ -128,10 +139,146 @@
};
};
+&pinctrl0 {
+ pinctrl_can0_default: pinctrl-can0-default {
+ common {
+ function = "can0";
+ groups = "can0_9_grp";
+ bias-pull-up = <0>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ rx {
+ pins = "MIO46";
+ bias-high-impedance = <1>;
+ };
+
+ tx {
+ pins = "MIO47";
+ bias-high-impedance = <0>;
+ };
+ };
+
+ pinctrl_gem0_default: pinctrl-gem0-default {
+ common {
+ function = "ethernet0";
+ groups = "ethernet0_0_grp";
+ bias-pull-up = <0>;
+ slew-rate = <0>;
+ io-standard = <4>;
+ };
+
+ rx {
+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+ bias-high-impedance = <1>;
+ low-power-disable;
+ };
+
+ tx {
+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+ bias-high-impedance = <0>;
+ low-power-enable;
+ };
+
+ mdio {
+ function = "mdio0";
+ groups = "mdio0_0_grp";
+ };
+ };
+
+ pinctrl_gpio0_default: pinctrl-gpio0-default {
+ common {
+ function = "gpio0";
+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+ "gpio0_13_grp", "gpio0_14_grp";
+ bias-high-impedance = <0>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ pull-up {
+ pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+ bias-pull-up = <1>;
+ };
+
+ pull-none {
+ pins = "MIO7", "MIO8";
+ bias-pull-up = <0>;
+ };
+
+ };
+
+ pinctrl_i2c0_default: pinctrl-i2c0-default {
+ common {
+ groups = "i2c0_10_grp";
+ function = "i2c0";
+ bias-pull-up = <1>;
+ bias-high-impedance = <0>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_sdhci0_default: pinctrl-sdhci0-default {
+ common {
+ groups = "sdio0_2_grp";
+ function = "sdio0";
+ bias-high-impedance = <0>;
+ bias-pull-up = <0>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ cd {
+ groups = "gpio0_0_grp";
+ function = "sdio0_cd";
+ bias-high-impedance = <1>;
+ bias-pull-up = <1>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ wp {
+ groups = "gpio0_15_grp";
+ function = "sdio0_wp";
+ bias-high-impedance = <1>;
+ bias-pull-up = <1>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_uart1_default: pinctrl-uart1-default {
+ common {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ bias-pull-up = <0>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ rx {
+ pins = "MIO49";
+ bias-high-impedance = <1>;
+ };
+
+ tx {
+ pins = "MIO48";
+ bias-high-impedance = <0>;
+ };
+ };
+};
+
&sdhci0 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
};
&uart1 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index a8bbdfbc7093..42a335431613 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -33,15 +33,24 @@
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <ðernet_phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem0_default>;
ethernet_phy: ethernet-phy@7 {
reg = <7>;
};
};
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
&i2c0 {
status = "okay";
clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
i2cswitch@74 {
compatible = "nxp,pca9548";
@@ -107,10 +116,127 @@
};
};
+&pinctrl0 {
+ pinctrl_gem0_default: pinctrl-gem0-default {
+ common {
+ function = "ethernet0";
+ groups = "ethernet0_0_grp";
+ bias-pull-up = <0>;
+ slew-rate = <0>;
+ io-standard = <4>;
+ };
+
+ rx {
+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+ bias-high-impedance = <1>;
+ low-power-disable;
+ };
+
+ tx {
+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+ bias-high-impedance = <0>;
+ low-power-enable;
+ };
+
+ mdio {
+ function = "mdio0";
+ groups = "mdio0_0_grp";
+ bias-high-impedance = <0>;
+ bias-pull-up = <0>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_gpio0_default: pinctrl-gpio0-default {
+ common {
+ function = "gpio0";
+ groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+ bias-high-impedance = <0>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ pull-up {
+ pins = "MIO46", "MIO47";
+ bias-pull-up = <1>;
+ };
+
+ pull-none {
+ pins = "MIO7";
+ bias-pull-up = <0>;
+ };
+ };
+
+ pinctrl_i2c0_default: pinctrl-i2c0-default {
+ common {
+ groups = "i2c0_10_grp";
+ function = "i2c0";
+ bias-high-impedance = <0>;
+ bias-pull-up = <1>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_sdhci0_default: pinctrl-sdhci0-default {
+ common {
+ groups = "sdio0_2_grp";
+ function = "sdio0";
+ bias-high-impedance = <0>;
+ bias-pull-up = <0>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ cd {
+ groups = "gpio0_14_grp";
+ function = "sdio0_cd";
+ bias-high-impedance = <1>;
+ bias-pull-up = <1>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ wp {
+ groups = "gpio0_15_grp";
+ function = "sdio0_wp";
+ bias-high-impedance = <1>;
+ bias-pull-up = <1>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_uart1_default: pinctrl-uart1-default {
+ common {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ bias-pull-up = <0>;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ rx {
+ pins = "MIO49";
+ bias-high-impedance = <1>;
+ };
+
+ tx {
+ pins = "MIO48";
+ bias-high-impedance = <0>;
+ };
+ };
+};
+
&sdhci0 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
};
&uart1 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
};
--
2.1.2.1.g5e69ed6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists