| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1413539380-7046-1-git-send-email-alexandre.belloni@free-electrons.com> Date: Fri, 17 Oct 2014 11:49:40 +0200 From: Alexandre Belloni <alexandre.belloni@...e-electrons.com> To: Linus Walleij <linus.walleij@...aro.org> Cc: Nicolas Ferre <nicolas.ferre@...el.com>, Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, Alexandre Belloni <alexandre.belloni@...e-electrons.com> Subject: [PATCH] pinctrl: at91: use own header Copy the mach/at91_pio.h header locally and use it for pinctrl-at91.c. This allows to remove the dependency on mach/at91_pio.h to be able to move at91 to multiplatform. Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com> --- Note that mach/at91_pio.h should go away soon hopefully as the remaining board files in mach-at91 are schedulded to be removed. MAINTAINERS | 2 +- drivers/pinctrl/pinctrl-at91.c | 4 +-- drivers/pinctrl/pinctrl-at91.h | 66 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 68 insertions(+), 4 deletions(-) create mode 100644 drivers/pinctrl/pinctrl-at91.h diff --git a/MAINTAINERS b/MAINTAINERS index f10ed3914ea8..37c98aa5fb77 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7049,7 +7049,7 @@ PIN CONTROLLER - ATMEL AT91 M: Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com> L: linux-arm-kernel@...ts.infradead.org (moderated for non-subscribers) S: Maintained -F: drivers/pinctrl/pinctrl-at91.c +F: drivers/pinctrl/pinctrl-at91.* PIN CONTROLLER - RENESAS M: Laurent Pinchart <laurent.pinchart@...asonboard.com> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 60464a2648aa..0058817b12fd 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -25,9 +25,7 @@ /* Since we request GPIOs from ourself */ #include <linux/pinctrl/consumer.h> -#include <mach/hardware.h> -#include <mach/at91_pio.h> - +#include "pinctrl-at91.h" #include "core.h" #define MAX_GPIO_BANKS 5 diff --git a/drivers/pinctrl/pinctrl-at91.h b/drivers/pinctrl/pinctrl-at91.h new file mode 100644 index 000000000000..c837c66ea360 --- /dev/null +++ b/drivers/pinctrl/pinctrl-at91.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Parallel I/O Controller (PIO) - System peripherals registers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __PINCTRL_AT91_H +#define __PINCTRL_AT91_H + +#define PIO_PER 0x00 /* Enable Register */ +#define PIO_PDR 0x04 /* Disable Register */ +#define PIO_PSR 0x08 /* Status Register */ +#define PIO_OER 0x10 /* Output Enable Register */ +#define PIO_ODR 0x14 /* Output Disable Register */ +#define PIO_OSR 0x18 /* Output Status Register */ +#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ +#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ +#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ +#define PIO_SODR 0x30 /* Set Output Data Register */ +#define PIO_CODR 0x34 /* Clear Output Data Register */ +#define PIO_ODSR 0x38 /* Output Data Status Register */ +#define PIO_PDSR 0x3c /* Pin Data Status Register */ +#define PIO_IER 0x40 /* Interrupt Enable Register */ +#define PIO_IDR 0x44 /* Interrupt Disable Register */ +#define PIO_IMR 0x48 /* Interrupt Mask Register */ +#define PIO_ISR 0x4c /* Interrupt Status Register */ +#define PIO_MDER 0x50 /* Multi-driver Enable Register */ +#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ +#define PIO_MDSR 0x58 /* Multi-driver Status Register */ +#define PIO_PUDR 0x60 /* Pull-up Disable Register */ +#define PIO_PUER 0x64 /* Pull-up Enable Register */ +#define PIO_PUSR 0x68 /* Pull-up Status Register */ +#define PIO_ASR 0x70 /* Peripheral A Select Register */ +#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some sam9 only] */ +#define PIO_BSR 0x74 /* Peripheral B Select Register */ +#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some sam9 only] */ +#define PIO_ABSR 0x78 /* AB Status Register */ +#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */ +#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */ +#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */ +#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */ +#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ +#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */ +#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */ +#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */ +#define PIO_OWER 0xa0 /* Output Write Enable Register */ +#define PIO_OWDR 0xa4 /* Output Write Disable Register */ +#define PIO_OWSR 0xa8 /* Output Write Status Register */ +#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */ +#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */ +#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */ +#define PIO_ESR 0xc0 /* Edge Select Register */ +#define PIO_LSR 0xc4 /* Level Select Register */ +#define PIO_ELSR 0xc8 /* Edge/Level Status Register */ +#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */ +#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */ +#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */ +#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */ + +#endif -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists