[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1413539665-11484-1-git-send-email-chunyan.zhang@spreadtrum.com>
Date: Fri, 17 Oct 2014 17:54:20 +0800
From: Chunyan Zhang <chunyan.zhang@...eadtrum.com>
To: <catalin.marinas@....com>, <gregkh@...uxfoundation.org>,
<ijc+devicetree@...lion.org.uk>, <jslaby@...e.cz>,
<galak@...eaurora.org>, <broonie@...aro.org>,
<mark.rutland@....com>, <m-karicheri2@...com>,
<pawel.moll@....com>, <artagnon@...il.com>, <rrichter@...ium.com>,
<robh+dt@...nel.org>, <will.deacon@....com>, <orsonzhai@...il.com>,
<geng.ren@...eadtrum.com>, <zhizhou.zhang@...eadtrum.com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <sprdlinux@...elists.org>
Subject: [PATCH v2 0/5] Add Spreadtrum Sharkl Platform support
Spreadtrum is a rapid growing chip vendor providing smart phone total solutions.
Sharkl Platform is nominated as a SoC infrastructure that supports 4G/3G/2G
standards based on ARMv8 multiple core architecture.Now we have only one
SoC(Sharkl3) based on this Platform in developing.
This patchset adds Sharkl support in arm64 device tree and implements the
basic earlycon serial driver.
This patchset also has patches which address "sprd" prefix and DT compatible
strings for nodes which appear un-documented.
This version code was tesed on Fast Mode successfully.
Changes from v1:
* Addressed review comments:
- Added "sprd" prefix to vendor-prefixes.txt
- Created serial/sprd-serial.txt and remove the properties for serial-sprd
from of-serial.txt to it.
- Renamed of-serial.txt to 8250.txt according to Arnd's review comments
- Splited and revised .dts for Sharkl Platform
- Changed to PSCI method for cpu power management
- Revised Kconfig Makefile to match the alphabetical ordering
- Renamed serial-sprd-earlycon.c to serial-sprd.c
Chunyan Zhang (3):
Documentation: DT: Renamed of-serial.txt to 8250.txt
Documentation: DT: Add bindings for Spreadtrum Sharkl Platform
tty/serial: Add earlycon support for Spreadtrum serial driver
Zhizhou Zhang (2):
arm64: dts: Add support for Spreadtrum Sharkl3 SoC in dts and Makefile.
arm64: Add support for Spreadtrum's Sharkl Platform in Kconfig and defconfig
Documentation/devicetree/bindings/arm/sprd.txt | 11 ++++
Documentation/devicetree/bindings/serial/8250.txt | 50 ++++++++++++++
.../devicetree/bindings/serial/of-serial.txt | 50 --------------
.../devicetree/bindings/serial/sprd-serial.txt | 6 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm64/Kconfig | 6 ++
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/sprd-sharkl.dtsi | 33 ++++++++++
arch/arm64/boot/dts/sprd-sharkl3-fpga.dts | 41 ++++++++++++
arch/arm64/boot/dts/sprd-sharkl3.dtsi | 69 ++++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
drivers/tty/serial/Kconfig | 24 +++++++
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/sprd-serial.c | 64 ++++++++++++++++++
14 files changed, 308 insertions(+), 50 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/sprd.txt
create mode 100644 Documentation/devicetree/bindings/serial/8250.txt
delete mode 100644 Documentation/devicetree/bindings/serial/of-serial.txt
create mode 100644 Documentation/devicetree/bindings/serial/sprd-serial.txt
create mode 100644 arch/arm64/boot/dts/sprd-sharkl.dtsi
create mode 100644 arch/arm64/boot/dts/sprd-sharkl3-fpga.dts
create mode 100644 arch/arm64/boot/dts/sprd-sharkl3.dtsi
create mode 100644 drivers/tty/serial/sprd-serial.c
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists