| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <87tx3042zu.wl%satoru.takeuchi@gmail.com>
Date: Sun, 19 Oct 2014 22:12:53 +0900
From: Satoru Takeuchi <satoru.takeuchi@...il.com>
To: Jiri Slaby <jslaby@...e.cz>
Cc: stable@...r.kernel.org, linux@...ck-us.net,
satoru.takeuchi@...il.com, shuah.kh@...sung.com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3.12 000/197] 3.12.31-stable review
Hi Jiri,
At Fri, 17 Oct 2014 10:11:30 +0200,
Jiri Slaby wrote:
>
> This is the start of the stable review cycle for the 3.12.31 release.
> There are 197 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue Oct 21 10:08:49 CEST 2014.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> http://kernel.org/pub/linux/kernel/people/jirislaby/stable-review/patch-3.12.31-rc1.xz
> and the diffstat can be found below.
This kernel passed my test.
- Test Cases:
- Build this kernel.
- Boot this kernel.
- Build the latest mainline kernel with this kernel.
- Test Tool:
https://github.com/satoru-takeuchi/test-linux-stable
- Test Result (kernel .config, ktest config and test log):
http://satoru-takeuchi.org/test-linux-stable/results/<version>-<test datetime>.tar.xz
- Build Environment:
- OS: Debian Jessy x86_64
- CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
- memory: 8GB
- Test Target Environment:
- Debian Jessy x86_64 (KVM guest on the Build Environment)
- # of vCPU: 2
- memory: 2GB
Thanks,
Satoru
>
> thanks,
> js
>
> ===============
>
>
> Al Viro (1):
> don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
>
> Alan Douglas (1):
> xtensa: fix address checks in dma_{alloc,free}_coherent
>
> Alan Stern (1):
> USB: EHCI: unlink QHs even after the controller has stopped
>
> Alex Deucher (8):
> drm/radeon/dpm: set the thermal type properly for special configs
> drm/radeon: add connector quirk for fujitsu board
> drm/radeon: don't reset dma on NI/SI init
> drm/radeon: don't reset sdma on CIK init
> drm/radeon: don't reset dma on r6xx-evergreen init
> drm/radeon/cik: use a separate counter for CP init timeout
> vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
> drm/nouveau/runpm: fix module unload
>
> Alex Gartrell (1):
> ipvs: Maintain all DSCP and ECN bits for ipv6 tun forwarding
>
> Andreas Bomholtz (1):
> USB: cp210x: add support for Seluxit USB dongle
>
> Andreas Rohner (1):
> nilfs2: fix data loss with mmap()
>
> Andrew Hunter (1):
> jiffies: Fix timeval conversion to jiffies
>
> Andrey Vagin (2):
> fsnotify/fdinfo: use named constants instead of hardcoded values
> fs/notify: don't show f_handle if exportfs_encode_inode_fh failed
>
> Andy Shevchenko (2):
> dmaengine: dw: introduce dwc_dostart_first_queued() helper
> dmaengine: dw: don't perform DMA when dmaengine_submit is called
>
> Anssi Hannula (1):
> dm cache: fix race causing dirty blocks to be marked as clean
>
> Anton Altaparmakov (1):
> Fix nasty 32-bit overflow bug in buffer i/o code.
>
> Arnd Bergmann (1):
> staging/lustre: disable virtual block device for 64K pages
>
> Aurelien Jarno (1):
> MIPS: ZBOOT: add missing <linux/string.h> include
>
> Benjamin Tissoires (1):
> HID: logitech-dj: prevent false errors to be shown
>
> Bjørn Mork (2):
> USB: sierra: avoid CDC class functions on "68A3" devices
> USB: sierra: add 1199:68AA device ID
>
> Brennan Ashton (1):
> USB: option: add VIA Telecom CDS7 chipset device id
>
> Bryan O'Donoghue (1):
> serial: 8250: Add Quark X1000 to 8250_pci.c
>
> Chen-Yu Tsai (1):
> i2c: mv64xxx: continue probe when clock-frequency is missing
>
> Chris Wilson (1):
> drm/i915: Flush the PTEs after updating them before suspend
>
> Christian Borntraeger (1):
> KVM: s390/mm: try a cow on read only pages for key ops
>
> Clemens Ladisch (2):
> ALSA: core: fix buffer overflow in snd_info_get_line()
> ALSA: pcm: fix fifo_size frame calculation
>
> Cong Wang (1):
> perf: Fix a race condition in perf_remove_from_context()
>
> Dan Carpenter (2):
> NFC: microread: Potential overflows in microread_target_discovered()
> partitions: aix.c: off by one bug
>
> Daniel Borkmann (1):
> netlink: reset network header before passing to taps
>
> Daniel Vetter (1):
> drm/i915: Fix EIO/wedged handling in gem fault handler
>
> Dave Martin (1):
> ARM: 7897/1: kexec: Use the right ISA for relocate_new_kernel
>
> David Jeffery (1):
> nfs: Don't busy-wait on SIGKILL in __nfs_iocounter_wait
>
> David Rientjes (1):
> mm, slab: initialize object alignment on cache creation
>
> Denis CIOCCA (1):
> iio:magnetometer: bugfix magnetometers gain values
>
> Dmitry Torokhov (2):
> Input: synaptics - add support for ForcePads
> Input: atkbd - do not try 'deactivate' keyboard on any LG laptops
>
> Eliad Peller (1):
> regulatory: add NUL to alpha2
>
> Emmanuel Grumbach (1):
> Revert "iwlwifi: dvm: don't enable CTS to self"
>
> Eric Dumazet (1):
> packet: handle too big packets for PACKET_V3
>
> Fan Du (1):
> i2c: ismt: use correct length when copy buffer
>
> Felipe Balbi (4):
> usb: host: xhci: fix compliance mode workaround
> usb: dwc3: omap: fix ordering for runtime pm calls
> usb: dwc3: core: fix order of PM runtime calls
> usb: dwc3: core: fix ordering for PHY suspend
>
> Filipe Brandenburger (1):
> xattr: fix check for simultaneous glibc header inclusion
>
> Gerhard Stenzel (1):
> vxlan: fix incorrect initializer in union vxlan_addr
>
> Greg KH (1):
> USB: serial: pl2303: add device id for ztek device
>
> Gu Zheng (1):
> aio: block exit_aio() until all context requests are completed
>
> Guillaume Nault (1):
> l2tp: fix race while getting PMTU on PPP pseudo-wire
>
> Hans Verkuil (3):
> media: cx18: fix kernel oops with tda8290 tuner
> media: adv7604: fix inverted condition
> media: vb2: fix VBI/poll regression
>
> Hans de Goede (3):
> Input: elantech - fix detection of touchpad on ASUS s301l
> Input: i8042 - add Fujitsu U574 to no_timeout dmi table
> Input: i8042 - add nomux quirk for Avatar AVIU-145A6
>
> Heikki Krogerus (1):
> serial: 8250_dma: check the result of TX buffer mapping
>
> Honggang Li (1):
> percpu: free percpu allocation info for uniprocessor system
>
> Ivan T. Ivanov (2):
> usb: chipidea: msm: Use USB PHY API to control PHY state
> usb: chipidea: msm: Initialize PHY on reset event
>
> J. Bruce Fields (1):
> lockd: fix rpcbind crash on lockd startup failure
>
> James Ralston (1):
> ata_piix: Add Device IDs for Intel 9 Series PCH
>
> Jan Kara (1):
> udf: Avoid infinite loop when processing indirect ICBs
>
> Jens Axboe (1):
> genhd: fix leftover might_sleep() in blk_free_devt()
>
> Jiri Benc (2):
> rtnetlink: fix VF info size
> openvswitch: fix panic with multiple vlan headers
>
> Jiri Kosina (2):
> HID: picolcd: sanity check report size in raw_event() callback
> HID: magicmouse: sanity check report size in raw_event() callback
>
> Joe Lawrence (2):
> usb: hub: take hub->hdev reference when processing from eventlist
> team: avoid race condition in scheduling delayed work
>
> Joe Savage (1):
> USB: serial: cp210x: added Ketra N1 wireless interface support
>
> Joern Engel (1):
> iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure
>
> Johan Hovold (7):
> USB: serial: fix potential stack buffer overflow
> USB: serial: fix potential heap buffer overflow
> USB: option: reduce interrupt-urb logging verbosity
> Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"
> USB: zte_ev: remove duplicate Gobi PID
> USB: zte_ev: remove duplicate Qualcom PID
> USB: ftdi_sio: add support for NOVITUS Bono E thermal printer
>
> Johannes Berg (2):
> Revert "mac80211: disable uAPSD if all ACs are under ACM"
> nl80211: clear skb cb before passing to netlink
>
> Johannes Pointner (1):
> iio:inkern: fix overwritten -EPROBE_DEFER in
> of_iio_channel_get_by_name
>
> John David Anglin (1):
> parisc: Only use -mfast-indirect-calls option for 32-bit kernel builds
>
> John Sung (1):
> Input: serport - add compat handling for SPIOCSTYPE ioctl
>
> Jorge A. Ventura (1):
> spi/omap-mcspi: Fix the spi task hangs waiting dma_rx
>
> Josef Bacik (1):
> trace: Fix epoll hang when we race with new entries
>
> Joseph Qi (1):
> ocfs2/dlm: do not get resource spinlock if lockres is new
>
> Josh Triplett (1):
> init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu
>
> Julian Anastasov (2):
> ipvs: avoid netns exit crash on ip_vs_conn_drop_conntrack
> ipvs: fix ipv6 hook registration for local replies
>
> KY Srinivasan (1):
> hyperv: Fix a bug in netvsc_start_xmit()
>
> Keith Busch (1):
> block: Fix dev_t minor allocation lifetime
>
> Larry Finger (1):
> rtlwifi: rtl8192cu: Add new ID
>
> Lars Ellenberg (1):
> drbd: fix regression 'out of mem, failed to invoke fence-peer helper'
>
> Lee, Chun-Yi (1):
> ACPI / RTC: Fix CMOS RTC opregion handler accesses to wrong addresses
>
> Lu Baolu (1):
> USB: Add device quirk for ASUS T100 Base Station keyboard
>
> Marek Roszko (1):
> i2c: at91: add bound checking on SMBus block length bytes
>
> Mark (4):
> storage: Add single-LUN quirk for Jaz USB Adapter
> USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI
> Adapter
> USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI
> adapter
> USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
>
> Mark Brown (2):
> regmap: Fix handling of volatile registers for format_write() chips
> regmap: Don't attempt block writes when syncing cache on single_rw
> devices
>
> Mark Rutland (1):
> ARM: 8128/1: abort: don't clear the exclusive monitors
>
> Markos Chandras (1):
> MIPS: mcount: Adjust stack pointer for static trace in MIPS32
>
> Mathias Krause (1):
> drm/i915: Remove bogus __init annotation from DMI callbacks
>
> Mathias Nyman (2):
> xhci: Fix null pointer dereference if xhci initialization fails
> xhci: fix oops when xhci resumes from hibernate with hw lpm capable
> devices
>
> Max Filippov (4):
> xtensa: replace IOCTL code definitions with constants
> xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS
> xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss
> xtensa: fix a6 and a7 handling in fast_syscall_xtensa
>
> Mel Gorman (2):
> mm: migrate: Close race between migration completion and mprotect
> mm: numa: Do not mark PTEs pte_numa when splitting huge pages
>
> Michal Hocko (1):
> mm: new_vma_page() cannot see NULL vma for hugetlb pages
>
> Mike Christie (1):
> SCSI: libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
>
> Mike Marciniszyn (1):
> IB/qib: Correct reference counting in debugfs qp_stats
>
> Miklos Szeredi (1):
> shmem: fix nlink for rename overwrite directory
>
> Mikulas Patocka (1):
> dm crypt: fix access beyond the end of allocated space
>
> Nathan Lynch (1):
> ARM: 8148/1: flush TLS and thumbee register state during exec
>
> Neal Cardwell (2):
> tcp: fix tcp_release_cb() to dispatch via address family for
> mtu_reduced()
> tcp: fix ssthresh and undo for consecutive short FRTO episodes
>
> NeilBrown (2):
> md/raid1: fix_read_error should act on all non-faulty devices.
> md/raid5: disable 'DISCARD' by default due to safety concerns.
>
> Nicholas Bellinger (1):
> iscsi-target: Fix memory corruption in
> iscsit_logout_post_handler_diffcid
>
> Nicolas Dichtel (1):
> ip6_gre: fix flowi6_proto value in xmit path
>
> Nicolas Iooss (1):
> eventpoll: fix uninitialized variable in epoll_ctl
>
> Olav Haugan (1):
> iommu/arm-smmu: fix programming of SMMU_CBn_TCR for stage 1
>
> Oleg Chernovskiy (1):
> drm/radeon: Add missing lines to ci_set_thermal_temperature_range
>
> Pavel Shilovsky (1):
> CIFS: Fix SMB2 readdir error handling
>
> Per Hurtig (1):
> tcp: fixing TLP's FIN recovery
>
> Peter Ujfalusi (1):
> ASoC: davinci-mcasp: Correct rx format unit configuration
>
> Peter Zijlstra (1):
> perf: fix perf bug in fork()
>
> Rafael J. Wysocki (2):
> PM / sleep: Add state field to pm_states[] entries
> PM / sleep: Use valid_state() for platform-dependent sleep states only
>
> Rajendra Nayak (1):
> ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x()
> variants
>
> Rasmus Villemoes (1):
> kcmp: fix standard comparison bug
>
> Richard Larocque (3):
> alarmtimer: Return relative times in timer_gettime
> alarmtimer: Do not signal SIGEV_NONE timers
> alarmtimer: Lock k_itimer during timer callback
>
> Robert Coulson (1):
> hwmon: (ds1621) Update zbits after conversion rate change
>
> Robin Murphy (1):
> ARM: 8165/1: alignment: don't break misaligned NEON load/store
>
> Ross Lagerwall (1):
> xen/manage: Always freeze/thaw processes when suspend/resuming
>
> Sagi Grimberg (2):
> Target/iser: Get isert_conn reference once got to connected_handler
> Target/iser: Don't put isert_conn inside disconnected handler
>
> Shmulik Ladkani (1):
> sit: Fix ipip6_tunnel_lookup device matching criteria
>
> Simon Lindgren (1):
> i2c: at91: Fix a race condition during signal handling in
> at91_do_twi_xfer.
>
> Soren Brinkmann (1):
> Revert "net/macb: add pinctrl consumer support"
>
> Srinivas Pandruvada (9):
> iio: hid_Sensors: fix crash during trigger unregister
> iio:trigger: modify return value for iio_trigger_get
> iio: accel: bma180: Fix indio_dev->trig assignment
> iio: hid_sensor_hub: Fix indio_dev->trig assignment
> iio: gyro: itg3200: Fix indio_dev->trig assignment
> iio: inv_mpu6050: Fix indio_dev->trig assignment
> iio: meter: ade7758: Fix indio_dev->trig assignment
> iio: st_sensors: Fix indio_dev->trig assignment
> iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment
>
> Stanislaw Gruszka (1):
> myri10ge: check for DMA mapping errors
>
> Steffen Klassert (2):
> xfrm: Generate blackhole routes only from route lookup functions
> xfrm: Generate queueing routes only from route lookup functions
>
> Stephen Hemminger (1):
> USB: sisusb: add device id for Magic Control USB video
>
> Steve Dickson (1):
> NFSv4: nfs4_state_manager() vs. nfs_server_remove_lists()
>
> Steven Rostedt (Red Hat) (1):
> ring-buffer: Fix infinite spin in reading buffer
>
> Sudeep Holla (1):
> ARM: 8133/1: use irq_set_affinity with force=false when migrating irqs
>
> Takashi Iwai (3):
> ALSA: hda - Fix digital mic on Acer Aspire 3830TG
> ALSA: hda - Fix COEF setups for ALC1150 codec
> ALSA: hda - Fix invalid pin powermap without jack detection
>
> Taylor Braun-Jones (1):
> USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker device
>
> Tejun Heo (3):
> workqueue: apply __WQ_ORDERED to create_singlethread_workqueue()
> percpu: fix pcpu_alloc_pages() failure path
> percpu: perform tlb flush after pcpu_map_pages() failure
>
> Tero Kristo (1):
> clk: prevent erronous parsing of children during rate change
>
> Thierry Reding (1):
> usb: phy: tegra: Avoid use of sizeof(void)
>
> Thomas Hellstrom (1):
> drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle
>
> Thomas Pugliese (1):
> uwb: init beacon cache entry before registering uwb device
>
> Toshiaki Makita (1):
> cfq-iosched: Fix wrong children_weight calculation
>
> Trond Myklebust (1):
> NFSv4: Fix another bug in the close/open_downgrade code
>
> Ville Syrjälä (1):
> drm/i915: Wait for vblank before enabling the TV encoder
>
> Vlad Yasevich (7):
> net: Always untag vlan-tagged traffic on input.
> bridge: Check if vlan filtering is enabled only once.
> bridge: Fix br_should_learn to check vlan_enabled
> tg3: Work around HW/FW limitations with vlan encapsulated frames
> tg3: Allow for recieve of full-size 8021AD frames
> macvtap: Fix race between device delete and open.
> sctp: handle association restarts when the socket is closed.
>
> Waiman Long (1):
> mm, thp: move invariant bug check out of loop in __split_huge_page_map
>
> Wanpeng Li (2):
> mm/mempolicy: fix !vma in new_vma_page()
> sched: Fix unreleased llc_shared_mask bit during CPU hotplug
>
> Will Deacon (1):
> arm64: ptrace: fix compat hardware watchpoint reporting
>
> Y.C. Chen (1):
> drm/ast: AST2000 cannot be detected correctly
>
> arch/arm/include/asm/tls.h | 62 +++++++++++++++
> arch/arm/kernel/irq.c | 2 +-
> arch/arm/kernel/machine_kexec.c | 17 +++--
> arch/arm/kernel/process.c | 2 +
> arch/arm/kernel/relocate_kernel.S | 8 +-
> arch/arm/kernel/thumbee.c | 2 +-
> arch/arm/kernel/traps.c | 17 +----
> arch/arm/mach-omap2/soc.h | 6 ++
> arch/arm/mm/abort-ev6.S | 6 --
> arch/arm/mm/abort-ev7.S | 6 --
> arch/arm/mm/alignment.c | 3 +
> arch/arm64/include/asm/hw_breakpoint.h | 1 -
> arch/arm64/kernel/ptrace.c | 3 +-
> arch/mips/boot/compressed/decompress.c | 1 +
> arch/mips/kernel/mcount.S | 12 +++
> arch/parisc/Makefile | 7 +-
> arch/s390/mm/pgtable.c | 10 +++
> arch/x86/kernel/smpboot.c | 3 +
> arch/xtensa/include/asm/pgtable.h | 7 +-
> arch/xtensa/include/asm/uaccess.h | 5 ++
> arch/xtensa/include/uapi/asm/ioctls.h | 19 ++---
> arch/xtensa/kernel/entry.S | 26 ++++---
> arch/xtensa/kernel/pci-dma.c | 12 +--
> block/cfq-iosched.c | 11 ++-
> block/genhd.c | 26 ++++---
> block/partition-generic.c | 2 +-
> block/partitions/aix.c | 2 +-
> drivers/acpi/acpi_cmos_rtc.c | 2 +-
> drivers/ata/ata_piix.c | 8 ++
> drivers/base/regmap/regcache.c | 2 +-
> drivers/base/regmap/regmap.c | 2 +-
> drivers/block/drbd/drbd_nl.c | 6 ++
> drivers/clk/clk.c | 7 +-
> drivers/dma/TODO | 1 -
> drivers/dma/dw/core.c | 38 +++++-----
> drivers/gpu/drm/ast/ast_main.c | 2 +-
> drivers/gpu/drm/i915/i915_gem.c | 11 ++-
> drivers/gpu/drm/i915/i915_gem_gtt.c | 14 +++-
> drivers/gpu/drm/i915/intel_bios.c | 2 +-
> drivers/gpu/drm/i915/intel_crt.c | 2 +-
> drivers/gpu/drm/i915/intel_lvds.c | 2 +-
> drivers/gpu/drm/i915/intel_tv.c | 4 +
> drivers/gpu/drm/nouveau/nouveau_vga.c | 9 +++
> drivers/gpu/drm/radeon/ci_dpm.c | 3 +
> drivers/gpu/drm/radeon/cik.c | 4 +-
> drivers/gpu/drm/radeon/cik_sdma.c | 7 --
> drivers/gpu/drm/radeon/ni_dma.c | 6 --
> drivers/gpu/drm/radeon/r600_dma.c | 9 ---
> drivers/gpu/drm/radeon/radeon_atombios.c | 33 ++++++--
> drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 3 +-
> drivers/gpu/vga/vga_switcheroo.c | 6 ++
> drivers/hid/hid-logitech-dj.c | 43 ++++++-----
> drivers/hid/hid-logitech-dj.h | 1 +
> drivers/hid/hid-magicmouse.c | 10 +++
> drivers/hid/hid-picolcd_core.c | 6 ++
> drivers/hwmon/ds1621.c | 1 +
> drivers/i2c/busses/i2c-at91.c | 32 ++++++--
> drivers/i2c/busses/i2c-ismt.c | 2 +-
> drivers/i2c/busses/i2c-mv64xxx.c | 3 +-
> drivers/iio/accel/bma180.c | 2 +-
> drivers/iio/accel/hid-sensor-accel-3d.c | 5 +-
> drivers/iio/adc/ad_sigma_delta.c | 2 +-
> .../iio/common/hid-sensors/hid-sensor-trigger.c | 10 +--
> .../iio/common/hid-sensors/hid-sensor-trigger.h | 2 +-
> drivers/iio/common/st_sensors/st_sensors_trigger.c | 2 +-
> drivers/iio/gyro/hid-sensor-gyro-3d.c | 5 +-
> drivers/iio/gyro/itg3200_buffer.c | 2 +-
> drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 2 +-
> drivers/iio/inkern.c | 2 +-
> drivers/iio/light/hid-sensor-als.c | 5 +-
> drivers/iio/magnetometer/hid-sensor-magn-3d.c | 5 +-
> drivers/iio/magnetometer/st_magn_core.c | 52 +++++++------
> drivers/infiniband/hw/qib/qib_debugfs.c | 3 +-
> drivers/infiniband/hw/qib/qib_qp.c | 8 --
> drivers/infiniband/ulp/isert/ib_isert.c | 7 +-
> drivers/input/keyboard/atkbd.c | 8 --
> drivers/input/mouse/elantech.c | 7 ++
> drivers/input/mouse/synaptics.c | 68 +++++++++++++----
> drivers/input/mouse/synaptics.h | 11 +++
> drivers/input/serio/i8042-x86ia64io.h | 15 ++++
> drivers/input/serio/serport.c | 45 +++++++++--
> drivers/iommu/arm-smmu.c | 7 +-
> drivers/md/dm-cache-target.c | 4 +-
> drivers/md/dm-crypt.c | 20 ++++-
> drivers/md/raid1.c | 4 +-
> drivers/md/raid5.c | 18 ++++-
> drivers/media/i2c/adv7604.c | 2 +-
> drivers/media/pci/cx18/cx18-driver.c | 1 +
> drivers/media/v4l2-core/videobuf2-core.c | 15 +++-
> drivers/net/ethernet/broadcom/tg3.c | 23 +++++-
> drivers/net/ethernet/cadence/macb.c | 11 ---
> drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 88 ++++++++++++++--------
> drivers/net/hyperv/netvsc_drv.c | 3 +-
> drivers/net/macvtap.c | 18 ++---
> drivers/net/team/team.c | 4 +-
> drivers/net/vxlan.c | 8 +-
> drivers/net/wireless/iwlwifi/dvm/rxon.c | 12 +++
> drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
> drivers/nfc/microread/microread.c | 16 +++-
> drivers/scsi/libiscsi.c | 10 +++
> drivers/spi/spi-omap2-mcspi.c | 3 +-
> drivers/staging/iio/meter/ade7758_trigger.c | 2 +-
> drivers/staging/lustre/lustre/Kconfig | 1 +
> drivers/target/iscsi/iscsi_target.c | 4 +-
> drivers/target/iscsi/iscsi_target_parameters.c | 2 +-
> drivers/tty/serial/8250/8250_dma.c | 17 +++--
> drivers/tty/serial/8250/8250_pci.c | 21 ++++++
> drivers/usb/chipidea/ci_hdrc_msm.c | 7 +-
> drivers/usb/core/hub.c | 10 ++-
> drivers/usb/core/quirks.c | 4 +
> drivers/usb/dwc3/core.c | 13 ++--
> drivers/usb/dwc3/dwc3-omap.c | 2 +-
> drivers/usb/host/ehci-hcd.c | 2 -
> drivers/usb/host/xhci-hub.c | 8 +-
> drivers/usb/host/xhci-mem.c | 2 +-
> drivers/usb/host/xhci.c | 12 ++-
> drivers/usb/misc/sisusbvga/sisusb.c | 1 +
> drivers/usb/phy/phy-tegra-usb.c | 4 +-
> drivers/usb/serial/cp210x.c | 2 +
> drivers/usb/serial/ftdi_sio.c | 3 +
> drivers/usb/serial/ftdi_sio_ids.h | 12 +++
> drivers/usb/serial/option.c | 31 +++++++-
> drivers/usb/serial/pl2303.c | 1 +
> drivers/usb/serial/pl2303.h | 1 +
> drivers/usb/serial/sierra.c | 9 ++-
> drivers/usb/serial/usb-serial.c | 37 ++++++---
> drivers/usb/serial/zte_ev.c | 20 -----
> drivers/usb/storage/unusual_devs.h | 38 ++++++++++
> drivers/uwb/lc-dev.c | 13 +++-
> drivers/xen/manage.c | 7 --
> fs/aio.c | 8 +-
> fs/buffer.c | 6 +-
> fs/cifs/cifsglob.h | 2 +
> fs/cifs/file.c | 2 +-
> fs/cifs/readdir.c | 2 +-
> fs/cifs/smb1ops.c | 7 ++
> fs/cifs/smb2maperror.c | 2 +-
> fs/cifs/smb2ops.c | 9 +++
> fs/cifs/smb2pdu.c | 9 +--
> fs/eventpoll.c | 3 +-
> fs/lockd/svc.c | 4 +-
> fs/namei.c | 33 ++++----
> fs/nfs/nfs4client.c | 38 +++++-----
> fs/nfs/nfs4proc.c | 30 ++++----
> fs/nfs/pagelist.c | 2 +-
> fs/nilfs2/inode.c | 7 +-
> fs/notify/fdinfo.c | 4 +-
> fs/ocfs2/dlm/dlmmaster.c | 18 +++--
> fs/udf/inode.c | 35 +++++----
> include/linux/hid-sensor-hub.h | 3 +
> include/linux/if_vlan.h | 6 --
> include/linux/iio/trigger.h | 4 +-
> include/linux/jiffies.h | 12 ---
> include/linux/skbuff.h | 1 +
> include/linux/usb/quirks.h | 3 +
> include/linux/vga_switcheroo.h | 2 +
> include/linux/workqueue.h | 2 +-
> include/media/videobuf2-core.h | 4 +
> include/net/dst.h | 16 +++-
> include/net/inet_connection_sock.h | 1 +
> include/net/regulatory.h | 2 +-
> include/net/sctp/command.h | 2 +-
> include/net/sock.h | 1 -
> include/net/tcp.h | 1 +
> include/uapi/linux/xattr.h | 2 +-
> init/Kconfig | 1 +
> kernel/events/core.c | 14 +++-
> kernel/fork.c | 5 +-
> kernel/kcmp.c | 7 +-
> kernel/power/main.c | 21 +++---
> kernel/power/power.h | 9 ++-
> kernel/power/suspend.c | 66 ++++++++--------
> kernel/power/suspend_test.c | 24 +++---
> kernel/time.c | 54 +++++++------
> kernel/time/alarmtimer.c | 34 ++++++---
> kernel/trace/ring_buffer.c | 18 ++++-
> mm/huge_memory.c | 11 ++-
> mm/mempolicy.c | 12 +--
> mm/migrate.c | 5 +-
> mm/percpu-vm.c | 22 ++++--
> mm/percpu.c | 2 +
> mm/shmem.c | 4 +-
> mm/slab.c | 11 +--
> net/8021q/vlan_core.c | 53 -------------
> net/bridge/br_private.h | 3 +
> net/bridge/br_vlan.c | 15 +++-
> net/core/dev.c | 2 +-
> net/core/netpoll.c | 2 +-
> net/core/rtnetlink.c | 3 +-
> net/core/skbuff.c | 53 +++++++++++++
> net/ipv4/route.c | 6 +-
> net/ipv4/tcp_input.c | 8 +-
> net/ipv4/tcp_ipv4.c | 5 +-
> net/ipv4/tcp_output.c | 6 +-
> net/ipv6/ip6_gre.c | 4 +-
> net/ipv6/ip6_output.c | 4 +-
> net/ipv6/sit.c | 6 +-
> net/ipv6/tcp_ipv6.c | 3 +-
> net/l2tp/l2tp_ppp.c | 3 +-
> net/mac80211/mlme.c | 3 +-
> net/netfilter/ipvs/ip_vs_conn.c | 1 -
> net/netfilter/ipvs/ip_vs_core.c | 2 +-
> net/netfilter/ipvs/ip_vs_xmit.c | 2 +-
> net/netlink/af_netlink.c | 2 +-
> net/openvswitch/actions.c | 5 ++
> net/packet/af_packet.c | 17 +++++
> net/packet/internal.h | 1 +
> net/sctp/sm_statefuns.c | 19 ++++-
> net/wireless/nl80211.c | 3 +
> net/xfrm/xfrm_policy.c | 48 ++++++++++--
> sound/core/info.c | 4 +-
> sound/core/pcm_lib.c | 8 +-
> sound/pci/hda/patch_conexant.c | 9 ++-
> sound/pci/hda/patch_realtek.c | 2 +
> sound/pci/hda/patch_sigmatel.c | 17 +++--
> sound/soc/davinci/davinci-mcasp.c | 11 ++-
> 216 files changed, 1534 insertions(+), 780 deletions(-)
>
> --
> 2.1.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists