linux-kernel - Re: [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAOesGMhSuvbWpM5CC_5Hy6BskM6sbrw0SCR90aKHvfk1Qm1_Ng@mail.gmail.com>
Date:	Tue, 21 Oct 2014 14:01:31 -0700
From:	Olof Johansson <olof@...om.net>
To:	Andreas Färber <afaerber@...e.de>
Cc:	Sören Brinkmann <soren.brinkmann@...inx.com>,
	Michal Simek <michal.simek@...inx.com>,
	Andreas Olofsson <andreas@...pteva.com>,
	Matteo Vit <matteo.vit@...rwaredesign.com>,
	Sean Rickerd <srickerd@...e.com>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	Punnaiah Choudary Kalluri <punnaia@...inx.com>,
	Lars-Peter Clausen <lars@...afoo.de>
Subject: Re: [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella

On Tue, Oct 21, 2014 at 1:52 PM, Andreas Färber <afaerber@...e.de> wrote:
> Hi Olof and Sören,
>
> Am 18.10.2014 um 06:28 schrieb Olof Johansson:
>> On Thu, Jul 24, 2014 at 4:00 PM, Andreas Färber <afaerber@...e.de> wrote:
>>> Hello,
>>>
>>> This patch series adds an initial device tree for the Parallella board.
>>> UART, SD card, Ethernet are enabled.
>>> Not yet enabled are HDMI, QSPI flash and 2x USB.
>>
>> Andreas (Olofsson) kindly sent me a board, and I added it to the boot
>> farm today, it'll be included in boot reports from here on.
>
> Good to hear.
>
>> I did a test run with yesterday's -next It looks like networking isn't
>> working there at the moment, clock related. Same happens with 3.17 and
>> latest mainline, config multi_v7_defconfig:
>>
>> [WARN] [    7.943648] macb e000b000.ethernet eth0: unable to generate
>> target frequency: 125000000 Hz
>> [WARN] [   10.948681] macb e000b000.ethernet eth0: unable to generate
>> target frequency: 125000000 Hz
>
> I am unable to reproduce this in my setup - at Linus' tip
> c2661b806092d8ea2dccb7b02b65776555e0ee47 (v3.18-rc1-68-gc2661b8), make
> oldconfig'ing my /proc/config.gz.
>
> Sören, in light of your explanations, should I be expecting problems
> with 1GbE or with 100MbE? My board is connected to a 1GbE switch.

My board might have old firmware/bitstream on it? It reports as:

U-Boot 2012.10-00003-g792c31c (Jan 03 2014 - 12:24:08)


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/