[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20141022113727.GK4939@x1>
Date: Wed, 22 Oct 2014 12:37:27 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Cc: MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
linux-kernel@...r.kernel.org,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
stable@...r.kernel.org
Subject: Re: [PATCH fixes v2] mfd: max77693: Fix always masked MUIC interrupts
On Wed, 22 Oct 2014, Krzysztof Kozlowski wrote:
> On pią, 2014-10-10 at 11:56 +0100, Lee Jones wrote:
> > On Fri, 10 Oct 2014, Krzysztof Kozlowski wrote:
> >
> > > All interrupts coming from MUIC were ignored because interrupt source
> > > register was masked.
> > >
> > > The Maxim 77693 has a "interrupt source" - a separate register and interrupts
> > > which give information about PMIC block triggering the individual
> > > interrupt (charger, topsys, MUIC, flash LED).
> > >
> > > By default bootloader could initialize this register to "mask all"
> > > value. In such case (observed on Trats2 board) MUIC interrupts won't be
> > > generated regardless of their mask status. Regmap irq chip was unmasking
> > > individual MUIC interrupts but the source was masked
> > >
> > > Before introducing regmap irq chip this interrupt source was unmasked,
> > > read and acked. Reading and acking is not necessary but unmasking is.
> > >
> > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> > > Cc: <stable@...r.kernel.org>
> > > Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
> >
> > Applied to -fixes until someone complains.
>
> Hi Lee,
>
> I cannot find this patch on gitweb (MFD tree), have you applied it?
>
> If not then could you squash it with:
> mfd: max77693: Fix a truncate warning
> https://lkml.org/lkml/2014/10/14/161
>
> If you wish I could resend it.
It as applied, just not pushed.
I can squash that commit into it yes.
> > > ---
> > >
> > > Changes since v1:
> > > 1. Do the unmasking in main MFD driver. Additionally unmask all
> > > interrupts, not only MUIC. Suggested by Chanwoo Choi.
> > > ---
> > > drivers/mfd/max77693.c | 12 ++++++++++++
> > > include/linux/mfd/max77693-private.h | 7 +++++++
> > > 2 files changed, 19 insertions(+)
> > >
> > > diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
> > > index 4b54da1ff7ab..4e4e6a1a6301 100644
> > > --- a/drivers/mfd/max77693.c
> > > +++ b/drivers/mfd/max77693.c
> > > @@ -253,6 +253,17 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
> > > goto err_irq_muic;
> > > }
> > >
> > > + /* Unmask interrupts from all blocks in interrupt source register */
> > > + ret = regmap_update_bits(max77693->regmap,
> > > + MAX77693_PMIC_REG_INTSRC_MASK,
> > > + SRC_IRQ_ALL, ~SRC_IRQ_ALL);
> > > + if (ret < 0) {
> > > + dev_err(max77693->dev,
> > > + "Could not unmask interrupts in INTSRC: %d\n",
> > > + ret);
> > > + goto err_intsrc;
> > > + }
> > > +
> > > pm_runtime_set_active(max77693->dev);
> > >
> > > ret = mfd_add_devices(max77693->dev, -1, max77693_devs,
> > > @@ -264,6 +275,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
> > >
> > > err_mfd:
> > > mfd_remove_devices(max77693->dev);
> > > +err_intsrc:
> > > regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
> > > err_irq_muic:
> > > regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
> > > diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
> > > index e1b2b61285b9..15fed5365a20 100644
> > > --- a/include/linux/mfd/max77693-private.h
> > > +++ b/include/linux/mfd/max77693-private.h
> > > @@ -438,6 +438,13 @@ enum max77693_irq_source {
> > > MAX77693_IRQ_GROUP_NR,
> > > };
> > >
> > > +#define SRC_IRQ_CHARGER BIT(0)
> > > +#define SRC_IRQ_TOP BIT(1)
> > > +#define SRC_IRQ_FLASH BIT(2)
> > > +#define SRC_IRQ_MUIC BIT(3)
> > > +#define SRC_IRQ_ALL (SRC_IRQ_CHARGER | SRC_IRQ_TOP \
> > > + | SRC_IRQ_FLASH | SRC_IRQ_MUIC)
> > > +
> > > #define LED_IRQ_FLED2_OPEN BIT(0)
> > > #define LED_IRQ_FLED2_SHORT BIT(1)
> > > #define LED_IRQ_FLED1_OPEN BIT(2)
> >
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists