[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2662114.YSJpathv6W@diego>
Date: Thu, 23 Oct 2014 18:32:18 +0200
From: Heiko Stübner <heiko@...ech.de>
To: Doug Anderson <dianders@...omium.org>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Chris Zhong <zyw@...k-chips.com>,
Sonny Rao <sonnyrao@...omium.org>,
linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock
Am Dienstag, 21. Oktober 2014, 10:47:35 schrieb Doug Anderson:
> There were a few instances where the rockchip pinctrl driver would do
> read-modify-write with no spinlock. Add a spinlock for these cases.
>
> Signed-off-by: Doug Anderson <dianders@...omium.org>
Reviewed-by: Heiko Stuebner <heiko@...ech.de>
thanks for catching those
> ---
> Changes in v2:
> - Made sure to release the lock in an error condition.
>
> drivers/pinctrl/pinctrl-rockchip.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c
> b/drivers/pinctrl/pinctrl-rockchip.c index 6c14f6c..59a5461 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -861,6 +861,7 @@ static int _rockchip_pmx_gpio_set_direction(struct
> gpio_chip *chip, {
> struct rockchip_pin_bank *bank;
> int ret;
> + unsigned long flags;
> u32 data;
>
> bank = gc_to_pin_bank(chip);
> @@ -869,6 +870,8 @@ static int _rockchip_pmx_gpio_set_direction(struct
> gpio_chip *chip, if (ret < 0)
> return ret;
>
> + spin_lock_irqsave(&bank->slock, flags);
> +
> data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
> /* set bit to 1 for output, 0 for input */
> if (!input)
> @@ -877,6 +880,8 @@ static int _rockchip_pmx_gpio_set_direction(struct
> gpio_chip *chip, data &= ~BIT(pin);
> writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
>
> + spin_unlock_irqrestore(&bank->slock, flags);
> +
> return 0;
> }
>
> @@ -1394,6 +1399,7 @@ static void rockchip_irq_demux(unsigned int irq,
> struct irq_desc *desc) u32 polarity = 0, data = 0;
> u32 pend;
> bool edge_changed = false;
> + unsigned long flags;
>
> dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name);
>
> @@ -1439,10 +1445,14 @@ static void rockchip_irq_demux(unsigned int irq,
> struct irq_desc *desc)
>
> if (bank->toggle_edge_mode && edge_changed) {
> /* Interrupt params should only be set with ints disabled */
> + spin_lock_irqsave(&bank->slock, flags);
> +
> data = readl_relaxed(bank->reg_base + GPIO_INTEN);
> writel_relaxed(0, bank->reg_base + GPIO_INTEN);
> writel(polarity, bank->reg_base + GPIO_INT_POLARITY);
> writel(data, bank->reg_base + GPIO_INTEN);
> +
> + spin_unlock_irqrestore(&bank->slock, flags);
> }
>
> chained_irq_exit(chip, desc);
> @@ -1456,6 +1466,7 @@ static int rockchip_irq_set_type(struct irq_data *d,
> unsigned int type) u32 polarity;
> u32 level;
> u32 data;
> + unsigned long flags;
> int ret;
>
> /* make sure the pin is configured as gpio input */
> @@ -1463,15 +1474,20 @@ static int rockchip_irq_set_type(struct irq_data *d,
> unsigned int type) if (ret < 0)
> return ret;
>
> + spin_lock_irqsave(&bank->slock, flags);
> +
> data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
> data &= ~mask;
> writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
>
> + spin_unlock_irqrestore(&bank->slock, flags);
> +
> if (type & IRQ_TYPE_EDGE_BOTH)
> __irq_set_handler_locked(d->irq, handle_edge_irq);
> else
> __irq_set_handler_locked(d->irq, handle_level_irq);
>
> + spin_lock_irqsave(&bank->slock, flags);
> irq_gc_lock(gc);
>
> level = readl_relaxed(gc->reg_base + GPIO_INTTYPE_LEVEL);
> @@ -1514,6 +1530,7 @@ static int rockchip_irq_set_type(struct irq_data *d,
> unsigned int type) break;
> default:
> irq_gc_unlock(gc);
> + spin_unlock_irqrestore(&bank->slock, flags);
> return -EINVAL;
> }
>
> @@ -1521,6 +1538,7 @@ static int rockchip_irq_set_type(struct irq_data *d,
> unsigned int type) writel_relaxed(polarity, gc->reg_base +
> GPIO_INT_POLARITY);
>
> irq_gc_unlock(gc);
> + spin_unlock_irqrestore(&bank->slock, flags);
>
> return 0;
> }
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists