[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <1414403066-7872-1-git-send-email-k.kozlowski@samsung.com>
Date: Mon, 27 Oct 2014 10:44:23 +0100
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org,
Ben Dooks <ben-linux@...ff.org>,
Kukjin Kim <kgene.kim@...sung.com>,
Russell King <linux@....linux.org.uk>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org
Cc: Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>,
Chanwoo Choi <cw00.choi@...sung.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>
Subject: [PATCH v4 0/3] regulator: max77686/trats2: Disable some regulators in
suspend
Hi,
Changes since v3
================
1. Dropped patch 3/4 ("mfd/regulator: dt-bindings: max77686: Document
regulators off in suspend"), applied by Lee Jones.
2. Patch 2/3: Fix missing shift when checking if current opmode is
equal to off in suspend. The shift is various so I added a simple
function max77686_set_opmode_enable(). Dropped Javier's review-by.
3. Patch 1/3: Add Javier's review-by.
4. Patch 3/3: Add Chanwoo's review-by.
Changes since v2
================
1. Patch 1/4: Fully describe different values used for controlling
the regulators (low power modes, enable, disable). Remove "opmode"
from new defines. Suggested by Javier.
2. Patch 2/4: minor nits after changing patch 1.
3. Add Javier's reviewed-by to 2, 3 and 4 patch.
4. Patch 3/4 (changes in documentation) should be picked up by Lee
Jones but I'm resending it anyway.
Changes since v1
================
1. Add patch 1/4 and 3/4.
2. Patch 2/4: Extend existing set_suspend_disable (for bucks) with
LDO support. Implement set_suspend_enable. Suggested by Javier.
3. Patch 4/4: Add regulator suspend properties only to regulators
actually supporting this. Other regulators, not implementing
suspend enable/disable, will warn ("VCC_1.8V_IO: No configuration").
4. Patch 4/4: In suspend enable VHSIC_1.0V and VHSIC_1.8V regulators.
Suggested by Chanwoo Choi.
Description
===========
This patchset makes use of Javier Martinez Cainllas changes [1].
It allows disabling some of the regulators during suspend to RAM.
Javier's patchset is necessary only to test it.
[1] [PATCH v3 0/2] ARM: EXYNOS: Call regulator suspend prepare/finish
https://lkml.org/lkml/2014/10/20/545
Best regards,
Krzysztof
Krzysztof Kozlowski (3):
regulator: max77686: Replace hard-coded opmode values with defines
regulator: max77686: Implement suspend disable for some LDOs
ARM: dts: exynos4412-trats: Add suspend configuration for max77686
regulators
arch/arm/boot/dts/exynos4412-trats2.dts | 72 +++++++++++++---------
drivers/regulator/max77686.c | 105 +++++++++++++++++++++++++++-----
2 files changed, 133 insertions(+), 44 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists