linux-kernel - Re: [PATCH v3 00/19] usb: dwc3: add support for AMD Nolan SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20141028151715.GB4519@hr-slim.amd.com>
Date:	Tue, 28 Oct 2014 23:17:16 +0800
From:	Huang Rui <ray.huang@....com>
To:	Felipe Balbi <balbi@...com>
CC:	Alan Stern <stern@...land.harvard.edu>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	"Paul Zimmerman" <Paul.Zimmerman@...opsys.com>,
	Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
	Jason Chang <jason.chang@....com>,
	"Vincent Wan" <vincent.wan@....com>, Tony Li <tony.li@....com>,
	<linux-usb@...r.kernel.org>, <linux-pci@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 00/19] usb: dwc3: add support for AMD Nolan SoC

On Tue, Oct 28, 2014 at 09:41:56AM -0500, Felipe Balbi wrote:
> Hi,
> 
> On Tue, Oct 28, 2014 at 07:54:21PM +0800, Huang Rui wrote:
> > Hi,
> > 
> > The series of patches add AMD Nolan (NL) SoC support for DesignWare USB3
> > OTG IP with PCI bus glue layer. This controller supported hibernation, LPM
> > erratum and used the 2.80a IP version and amd own phy. Current
> > implementation support both simulation and SoC platform. And already tested
> > with gadget zero and msc tool. It works well on file storage gadget.
> > 
> > 
> > These patches are generated on balbi/testing/next
> > 
> > Changes from v2 -> v3
> > - Confirmed these quirks will be needed in product level
> > - Move AMD configuration patch to the last one with all quirk flags
> > - Make all quirks as 1-bit field instead of single-bits on a 32-bit
> >   variable
> > - Add all quirks DeviceTree counterparts
> > - Make LPM erratum configurable
> > - Add PCI ID into pci_ids.h because it will be used both on PCI and DWC3
> >   device driver.
> > 
> > Changes from v1 -> v2
> > - Remove dual role function temporarily
> > - Add pci quirk to avoid to bind with xhci driver
> > - Distinguish between simulation board and soc
> > - Break down all the special quirks
> 
> In all patches touching DeviceTree, you should add the matching binding
> documentation under Documentation/devicetree/bindings/usb/dwc3.txt
> 

OK, will add this documentation.

> There are still a few cases where you're clipping words too harshly, for
> example tx_deemph doesn't look very intuitive, if you spell it out as
> tx_deemphasis, it's easier to read. Remember that humans will be the
> ones fiddling with those quirks.
> 
> A few of your patches I have fixed myself and they now sit on
> testing/next, please rebase your remaining changes there and make sure
> to add DeviceTree documentation.
> 
> When resending, please resend the entire series (even the ones I have
> already taken) because you also didn't Cc devicetree mailing list.
> 

Got it, could I also Cc stable mailing list and make them back port to
stable trees?

Thanks,
Rui
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/