| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1414531573-18807-26-git-send-email-maxime.ripard@free-electrons.com>
Date: Tue, 28 Oct 2014 22:25:40 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Vinod Koul <vinod.koul@...el.com>, dmaengine@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Antoine Ténart <antoine@...e-electrons.com>,
Russell King <linux@....linux.org.uk>, lars@...afoo.de,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH v4 25/58] dmaengine: k3: Split device_control
Split the device_control callback of the Hisilicon K3 DMA driver to make use
of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
drivers/dma/k3dma.c | 197 ++++++++++++++++++++++++++++------------------------
1 file changed, 107 insertions(+), 90 deletions(-)
diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
index a1f911aaf220..fb4dd2cffd80 100644
--- a/drivers/dma/k3dma.c
+++ b/drivers/dma/k3dma.c
@@ -441,7 +441,7 @@ static struct dma_async_tx_descriptor *k3_dma_prep_memcpy(
num = 0;
if (!c->ccfg) {
- /* default is memtomem, without calling device_control */
+ /* default is memtomem, without calling device_config */
c->ccfg = CX_CFG_SRCINCR | CX_CFG_DSTINCR | CX_CFG_EN;
c->ccfg |= (0xf << 20) | (0xf << 24); /* burst = 16 */
c->ccfg |= (0x3 << 12) | (0x3 << 16); /* width = 64 bit */
@@ -523,112 +523,126 @@ static struct dma_async_tx_descriptor *k3_dma_prep_slave_sg(
return vchan_tx_prep(&c->vc, &ds->vd, flags);
}
-static int k3_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
- unsigned long arg)
+static int k3_dma_config(struct dma_chan *chan,
+ struct dma_slave_config *cfg)
+{
+ struct k3_dma_chan *c = to_k3_chan(chan);
+ u32 maxburst = 0, val = 0;
+ enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
+
+ if (cfg == NULL)
+ return -EINVAL;
+ c->dir = cfg->direction;
+ if (c->dir == DMA_DEV_TO_MEM) {
+ c->ccfg = CX_CFG_DSTINCR;
+ c->dev_addr = cfg->src_addr;
+ maxburst = cfg->src_maxburst;
+ width = cfg->src_addr_width;
+ } else if (c->dir == DMA_MEM_TO_DEV) {
+ c->ccfg = CX_CFG_SRCINCR;
+ c->dev_addr = cfg->dst_addr;
+ maxburst = cfg->dst_maxburst;
+ width = cfg->dst_addr_width;
+ }
+ switch (width) {
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ case DMA_SLAVE_BUSWIDTH_8_BYTES:
+ val = __ffs(width);
+ break;
+ default:
+ val = 3;
+ break;
+ }
+ c->ccfg |= (val << 12) | (val << 16);
+
+ if ((maxburst == 0) || (maxburst > 16))
+ val = 16;
+ else
+ val = maxburst - 1;
+ c->ccfg |= (val << 20) | (val << 24);
+ c->ccfg |= CX_CFG_MEM2PER | CX_CFG_EN;
+
+ /* specific request line */
+ c->ccfg |= c->vc.chan.chan_id << 4;
+
+ return 0;
+}
+
+static int k3_dma_terminate_all(struct dma_chan *chan)
{
struct k3_dma_chan *c = to_k3_chan(chan);
struct k3_dma_dev *d = to_k3_dma(chan->device);
- struct dma_slave_config *cfg = (void *)arg;
struct k3_dma_phy *p = c->phy;
unsigned long flags;
- u32 maxburst = 0, val = 0;
- enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
LIST_HEAD(head);
- switch (cmd) {
- case DMA_SLAVE_CONFIG:
- if (cfg == NULL)
- return -EINVAL;
- c->dir = cfg->direction;
- if (c->dir == DMA_DEV_TO_MEM) {
- c->ccfg = CX_CFG_DSTINCR;
- c->dev_addr = cfg->src_addr;
- maxburst = cfg->src_maxburst;
- width = cfg->src_addr_width;
- } else if (c->dir == DMA_MEM_TO_DEV) {
- c->ccfg = CX_CFG_SRCINCR;
- c->dev_addr = cfg->dst_addr;
- maxburst = cfg->dst_maxburst;
- width = cfg->dst_addr_width;
- }
- switch (width) {
- case DMA_SLAVE_BUSWIDTH_1_BYTE:
- case DMA_SLAVE_BUSWIDTH_2_BYTES:
- case DMA_SLAVE_BUSWIDTH_4_BYTES:
- case DMA_SLAVE_BUSWIDTH_8_BYTES:
- val = __ffs(width);
- break;
- default:
- val = 3;
- break;
- }
- c->ccfg |= (val << 12) | (val << 16);
+ dev_dbg(d->slave.dev, "vchan %p: terminate all\n", &c->vc);
- if ((maxburst == 0) || (maxburst > 16))
- val = 16;
- else
- val = maxburst - 1;
- c->ccfg |= (val << 20) | (val << 24);
- c->ccfg |= CX_CFG_MEM2PER | CX_CFG_EN;
+ /* Prevent this channel being scheduled */
+ spin_lock(&d->lock);
+ list_del_init(&c->node);
+ spin_unlock(&d->lock);
- /* specific request line */
- c->ccfg |= c->vc.chan.chan_id << 4;
- break;
+ /* Clear the tx descriptor lists */
+ spin_lock_irqsave(&c->vc.lock, flags);
+ vchan_get_all_descriptors(&c->vc, &head);
+ if (p) {
+ /* vchan is assigned to a pchan - stop the channel */
+ k3_dma_terminate_chan(p, d);
+ c->phy = NULL;
+ p->vchan = NULL;
+ p->ds_run = p->ds_done = NULL;
+ }
+ spin_unlock_irqrestore(&c->vc.lock, flags);
+ vchan_dma_desc_free_list(&c->vc, &head);
- case DMA_TERMINATE_ALL:
- dev_dbg(d->slave.dev, "vchan %p: terminate all\n", &c->vc);
+ return 0;
+}
- /* Prevent this channel being scheduled */
- spin_lock(&d->lock);
- list_del_init(&c->node);
- spin_unlock(&d->lock);
+static int k3_dma_pause(struct dma_chan *chan)
+{
+ struct k3_dma_chan *c = to_k3_chan(chan);
+ struct k3_dma_dev *d = to_k3_dma(chan->device);
+ struct k3_dma_phy *p = c->phy;
- /* Clear the tx descriptor lists */
- spin_lock_irqsave(&c->vc.lock, flags);
- vchan_get_all_descriptors(&c->vc, &head);
+ dev_dbg(d->slave.dev, "vchan %p: pause\n", &c->vc);
+ if (c->status == DMA_IN_PROGRESS) {
+ c->status = DMA_PAUSED;
if (p) {
- /* vchan is assigned to a pchan - stop the channel */
- k3_dma_terminate_chan(p, d);
- c->phy = NULL;
- p->vchan = NULL;
- p->ds_run = p->ds_done = NULL;
+ k3_dma_pause_dma(p, false);
+ } else {
+ spin_lock(&d->lock);
+ list_del_init(&c->node);
+ spin_unlock(&d->lock);
}
- spin_unlock_irqrestore(&c->vc.lock, flags);
- vchan_dma_desc_free_list(&c->vc, &head);
- break;
+ }
- case DMA_PAUSE:
- dev_dbg(d->slave.dev, "vchan %p: pause\n", &c->vc);
- if (c->status == DMA_IN_PROGRESS) {
- c->status = DMA_PAUSED;
- if (p) {
- k3_dma_pause_dma(p, false);
- } else {
- spin_lock(&d->lock);
- list_del_init(&c->node);
- spin_unlock(&d->lock);
- }
- }
- break;
+ return 0;
+}
- case DMA_RESUME:
- dev_dbg(d->slave.dev, "vchan %p: resume\n", &c->vc);
- spin_lock_irqsave(&c->vc.lock, flags);
- if (c->status == DMA_PAUSED) {
- c->status = DMA_IN_PROGRESS;
- if (p) {
- k3_dma_pause_dma(p, true);
- } else if (!list_empty(&c->vc.desc_issued)) {
- spin_lock(&d->lock);
- list_add_tail(&c->node, &d->chan_pending);
- spin_unlock(&d->lock);
- }
+static int k3_dma_resume(struct dma_chan *chan)
+{
+ struct k3_dma_chan *c = to_k3_chan(chan);
+ struct k3_dma_dev *d = to_k3_dma(chan->device);
+ struct k3_dma_phy *p = c->phy;
+ unsigned long flags;
+
+ dev_dbg(d->slave.dev, "vchan %p: resume\n", &c->vc);
+ spin_lock_irqsave(&c->vc.lock, flags);
+ if (c->status == DMA_PAUSED) {
+ c->status = DMA_IN_PROGRESS;
+ if (p) {
+ k3_dma_pause_dma(p, true);
+ } else if (!list_empty(&c->vc.desc_issued)) {
+ spin_lock(&d->lock);
+ list_add_tail(&c->node, &d->chan_pending);
+ spin_unlock(&d->lock);
}
- spin_unlock_irqrestore(&c->vc.lock, flags);
- break;
- default:
- return -ENXIO;
}
+ spin_unlock_irqrestore(&c->vc.lock, flags);
+
return 0;
}
@@ -720,7 +734,10 @@ static int k3_dma_probe(struct platform_device *op)
d->slave.device_prep_dma_memcpy = k3_dma_prep_memcpy;
d->slave.device_prep_slave_sg = k3_dma_prep_slave_sg;
d->slave.device_issue_pending = k3_dma_issue_pending;
- d->slave.device_control = k3_dma_control;
+ d->slave.device_config = k3_dma_config;
+ d->slave.device_pause = k3_dma_pause;
+ d->slave.device_resume = k3_dma_resume;
+ d->slave.device_terminate_all = k3_dma_terminate_all;
d->slave.copy_align = DMA_ALIGN;
d->slave.chancnt = d->dma_requests;
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists