| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1414531573-18807-31-git-send-email-maxime.ripard@free-electrons.com>
Date: Tue, 28 Oct 2014 22:25:45 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Vinod Koul <vinod.koul@...el.com>, dmaengine@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Antoine Ténart <antoine@...e-electrons.com>,
Russell King <linux@....linux.org.uk>, lars@...afoo.de,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH v4 30/58] dmaengine: mpc512x: Split device_control
Split the device_control callback of the Freescale MPC512x DMA driver to make
use of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
drivers/dma/mpc512x_dma.c | 111 +++++++++++++++++++++-------------------------
1 file changed, 51 insertions(+), 60 deletions(-)
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 881db2bcb48b..15f2b56359e6 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -800,79 +800,69 @@ err_prep:
return NULL;
}
-static int mpc_dma_device_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
- unsigned long arg)
+static int mpc_dma_device_config(struct dma_chan *chan,
+ struct dma_slave_config *cfg)
{
- struct mpc_dma_chan *mchan;
- struct mpc_dma *mdma;
- struct dma_slave_config *cfg;
+ struct mpc_dma_chan *mchan = dma_chan_to_mpc_dma_chan(chan);
unsigned long flags;
- mchan = dma_chan_to_mpc_dma_chan(chan);
- switch (cmd) {
- case DMA_TERMINATE_ALL:
- /* Disable channel requests */
- mdma = dma_chan_to_mpc_dma(chan);
-
- spin_lock_irqsave(&mchan->lock, flags);
-
- out_8(&mdma->regs->dmacerq, chan->chan_id);
- list_splice_tail_init(&mchan->prepared, &mchan->free);
- list_splice_tail_init(&mchan->queued, &mchan->free);
- list_splice_tail_init(&mchan->active, &mchan->free);
-
- spin_unlock_irqrestore(&mchan->lock, flags);
+ /*
+ * Software constraints:
+ * - only transfers between a peripheral device and
+ * memory are supported;
+ * - only peripheral devices with 4-byte FIFO access register
+ * are supported;
+ * - minimal transfer chunk is 4 bytes and consequently
+ * source and destination addresses must be 4-byte aligned
+ * and transfer size must be aligned on (4 * maxburst)
+ * boundary;
+ * - during the transfer RAM address is being incremented by
+ * the size of minimal transfer chunk;
+ * - peripheral port's address is constant during the transfer.
+ */
- return 0;
+ if (cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES ||
+ cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES ||
+ !IS_ALIGNED(cfg->src_addr, 4) ||
+ !IS_ALIGNED(cfg->dst_addr, 4)) {
+ return -EINVAL;
+ }
- case DMA_SLAVE_CONFIG:
- /*
- * Software constraints:
- * - only transfers between a peripheral device and
- * memory are supported;
- * - only peripheral devices with 4-byte FIFO access register
- * are supported;
- * - minimal transfer chunk is 4 bytes and consequently
- * source and destination addresses must be 4-byte aligned
- * and transfer size must be aligned on (4 * maxburst)
- * boundary;
- * - during the transfer RAM address is being incremented by
- * the size of minimal transfer chunk;
- * - peripheral port's address is constant during the transfer.
- */
+ spin_lock_irqsave(&mchan->lock, flags);
- cfg = (void *)arg;
+ mchan->src_per_paddr = cfg->src_addr;
+ mchan->src_tcd_nunits = cfg->src_maxburst;
+ mchan->dst_per_paddr = cfg->dst_addr;
+ mchan->dst_tcd_nunits = cfg->dst_maxburst;
- if (cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES ||
- cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES ||
- !IS_ALIGNED(cfg->src_addr, 4) ||
- !IS_ALIGNED(cfg->dst_addr, 4)) {
- return -EINVAL;
- }
+ /* Apply defaults */
+ if (mchan->src_tcd_nunits == 0)
+ mchan->src_tcd_nunits = 1;
+ if (mchan->dst_tcd_nunits == 0)
+ mchan->dst_tcd_nunits = 1;
- spin_lock_irqsave(&mchan->lock, flags);
+ spin_unlock_irqrestore(&mchan->lock, flags);
- mchan->src_per_paddr = cfg->src_addr;
- mchan->src_tcd_nunits = cfg->src_maxburst;
- mchan->dst_per_paddr = cfg->dst_addr;
- mchan->dst_tcd_nunits = cfg->dst_maxburst;
+ return 0;
+}
- /* Apply defaults */
- if (mchan->src_tcd_nunits == 0)
- mchan->src_tcd_nunits = 1;
- if (mchan->dst_tcd_nunits == 0)
- mchan->dst_tcd_nunits = 1;
+static int mpc_dma_device_terminate_all(struct dma_chan *chan)
+{
+ struct mpc_dma_chan *mchan = dma_chan_to_mpc_dma_chan(chan);
+ struct mpc_dma *mdma = dma_chan_to_mpc_dma(chan);
+ unsigned long flags;
- spin_unlock_irqrestore(&mchan->lock, flags);
+ /* Disable channel requests */
+ spin_lock_irqsave(&mchan->lock, flags);
- return 0;
+ out_8(&mdma->regs->dmacerq, chan->chan_id);
+ list_splice_tail_init(&mchan->prepared, &mchan->free);
+ list_splice_tail_init(&mchan->queued, &mchan->free);
+ list_splice_tail_init(&mchan->active, &mchan->free);
- default:
- /* Unknown command */
- break;
- }
+ spin_unlock_irqrestore(&mchan->lock, flags);
- return -ENXIO;
+ return 0;
}
static int mpc_dma_probe(struct platform_device *op)
@@ -966,7 +956,8 @@ static int mpc_dma_probe(struct platform_device *op)
dma->device_tx_status = mpc_dma_tx_status;
dma->device_prep_dma_memcpy = mpc_dma_prep_memcpy;
dma->device_prep_slave_sg = mpc_dma_prep_slave_sg;
- dma->device_control = mpc_dma_device_control;
+ dma->device_config = mpc_dma_device_config;
+ dma->device_terminate_all = mpc_dma_device_terminate_all;
INIT_LIST_HEAD(&dma->channels);
dma_cap_set(DMA_MEMCPY, dma->cap_mask);
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists