| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1414538749-14735-7-git-send-email-dinguyen@opensource.altera.com>
Date: Tue, 28 Oct 2014 18:25:47 -0500
From: <dinguyen@...nsource.altera.com>
To: <paulz@...opsys.com>, <balbi@...com>
CC: <dinh.linux@...il.com>, <swarren@...dotorg.org>,
<b.zolnierkie@...sung.com>, <matthijs@...in.nl>,
<r.baldyga@...sung.com>, <jg1.han@...sung.com>,
<sachin.kamat@...aro.org>, <ben-linux@...ff.org>,
<dianders@...omium.org>, <kever.yang@...k-chips.com>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Dinh Nguyen <dinguyen@...nsource.altera.com>
Subject: [PATCHv6 6/8] usb: dwc2: gadget: Do not fail probe if there isn't a clock node
From: Dinh Nguyen <dinguyen@...nsource.altera.com>
Since the dwc2 hcd driver is currently not looking for a clock node during
init, we should not completely fail if there isn't a clock provided.
For dual-role mode, we will only fail init for a non-clock node error. We
then update the HCD to only call gadget funtions if there is a proper clock
node.
Signed-off-by: Dinh Nguyen <dinguyen@...nsource.altera.com>
---
v5: reworked to not access gadget functions from the hcd.
---
drivers/usb/dwc2/core.h | 3 +--
drivers/usb/dwc2/core_intr.c | 9 ++++++---
drivers/usb/dwc2/hcd.c | 3 ++-
drivers/usb/dwc2/platform.c | 19 +++++++++++++++----
4 files changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index ec70862..48120c8 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -660,6 +660,7 @@ struct dwc2_hsotg {
#endif
#endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */
+ struct clk *clk;
#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
/* Gadget structures */
struct usb_gadget_driver *driver;
@@ -667,8 +668,6 @@ struct dwc2_hsotg {
struct usb_phy *uphy;
struct s3c_hsotg_plat *plat;
- struct clk *clk;
-
struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
u32 phyif;
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 1240875..1608037 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -339,7 +339,8 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
}
/* Change to L0 state */
hsotg->lx_state = DWC2_L0;
- call_gadget(hsotg, resume);
+ if (!IS_ERR(hsotg->clk))
+ call_gadget(hsotg, resume);
} else {
if (hsotg->lx_state != DWC2_L1) {
u32 pcgcctl = readl(hsotg->regs + PCGCTL);
@@ -400,7 +401,8 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
"DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n",
!!(dsts & DSTS_SUSPSTS),
hsotg->hw_params.power_optimized);
- call_gadget(hsotg, suspend);
+ if (!IS_ERR(hsotg->clk))
+ call_gadget(hsotg, suspend);
} else {
if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) {
dev_dbg(hsotg->dev, "a_peripheral->a_host\n");
@@ -477,7 +479,8 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
spin_lock(&hsotg->lock);
if (dwc2_is_device_mode(hsotg))
- retval = s3c_hsotg_irq(irq, dev);
+ if (!IS_ERR(hsotg->clk))
+ retval = s3c_hsotg_irq(irq, dev);
gintsts = dwc2_read_common_intr(hsotg);
if (gintsts & ~GINTSTS_PRTINT)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 44c609f..fa49c72 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1371,7 +1371,8 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
hsotg->op_state = OTG_STATE_B_PERIPHERAL;
dwc2_core_init(hsotg, false, -1);
dwc2_enable_global_interrupts(hsotg);
- s3c_hsotg_core_init(hsotg);
+ if (!IS_ERR(hsotg->clk))
+ s3c_hsotg_core_init(hsotg);
} else {
/* A-Device connector (Host Mode) */
dev_dbg(hsotg->dev, "connId A\n");
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 72f32f7..77c8417 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -217,8 +217,17 @@ static int dwc2_driver_probe(struct platform_device *dev)
spin_lock_init(&hsotg->lock);
retval = dwc2_gadget_init(hsotg, irq);
- if (retval)
- return retval;
+ if (retval) {
+ /*
+ * We will not fail the driver initialization for dual-role
+ * if no clock node is supplied. However, all gadget
+ * functionality will be disabled if a clock node is not
+ * provided. Host functionality will continue.
+ * TO-DO: make clock node a requirement for the HCD.
+ */
+ if (!IS_ERR(hsotg->clk))
+ return retval;
+ }
retval = dwc2_hcd_init(hsotg, irq, params);
if (retval)
return retval;
@@ -234,7 +243,8 @@ static int dwc2_suspend(struct device *dev)
int ret = 0;
if (dwc2_is_device_mode(dwc2))
- ret = s3c_hsotg_suspend(dwc2);
+ if (!IS_ERR(dwc2->clk))
+ ret = s3c_hsotg_suspend(dwc2);
return ret;
}
@@ -244,7 +254,8 @@ static int dwc2_resume(struct device *dev)
int ret = 0;
if (dwc2_is_device_mode(dwc2))
- ret = s3c_hsotg_resume(dwc2);
+ if (!IS_ERR(dwc2->clk))
+ ret = s3c_hsotg_resume(dwc2);
return ret;
}
--
2.0.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists