[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <1414595206-1437-1-git-send-email-k.kozlowski@samsung.com>
Date: Wed, 29 Oct 2014 16:06:38 +0100
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org,
Ben Dooks <ben-linux@...ff.org>,
Kukjin Kim <kgene.kim@...sung.com>,
Russell King <linux@....linux.org.uk>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org
Cc: Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>,
Chanwoo Choi <cw00.choi@...sung.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>
Subject: [PATCH v2 0/8] regulator: max77686: Add GPIO control
Hi,
Patch 2/8: not tested on hardware. I am kindly asking for testing it
because I don't have the board with Maxim 77802.
Changes since v1
================
1. Add patch: 1/8 "regulator: max77686: Consistently index opmode
array by rdev id".
2. Remove patch "regulator: max77686: Make regulator_desc array
const" (applied).
3. Re-work patches removing from regulators board file support (2/8
and 3/8). Parse regulators with of_regulator_match() at once, remove
num_regulators.
4. Patch 4/8: Add depends on OF to mfd/Kconfig. Add Javier's
reviewed-by.
5. Patch 5/8: Add Javier's reviewed-by.
6. Patch 6/8: Add depends on GPIOLIB to regulator/Kconfig. Rename
"external control" to "GPIO control" and "ext_control_gpios" to
simpler "gpios".
I tried to use new GPIO API but it ended with more problems
https://lkml.org/lkml/2014/10/29/239
Description
===========
This patch helps in proper description of max77686 regulators in DTS by
allowing to control them over GPIO. This allows removal of
fixed regulators from DTS which duplicate the description of hardware.
The first five patches are cleanups, including board support removal.
The whole patchset should be taken at once.
Patchset is rebased on next-20141023 AND:
1. ARM: EXYNOS: Call regulator suspend prepare/finish
https://lkml.org/lkml/2014/10/20/545
2. regulator: max77686/trats2: Disable some regulators in suspend
https://lkml.org/lkml/2014/10/27/280
Best regards,
Krzysztof
Krzysztof Kozlowski (8):
regulator: max77686: Consistently index opmode array by rdev id
regulator: max77802: Remove support for board files
regulator: max77686: Remove support for board files
mfd: max77686/802: Remove support for board files
regulator: max77686: Initialize opmode explicitly to normal mode
regulator: max77686: Add GPIO control
mfd/regulator: dt-bindings: max77686: Document gpio property
ARM: dts: exynos4412-trats: Switch max77686 regulators to GPIO control
Documentation/devicetree/bindings/mfd/max77686.txt | 3 +
arch/arm/boot/dts/exynos4412-trats2.dts | 25 +--
drivers/mfd/Kconfig | 1 +
drivers/mfd/max77686.c | 23 ---
drivers/regulator/Kconfig | 1 +
drivers/regulator/max77686.c | 179 ++++++++++++++-------
drivers/regulator/max77802.c | 87 ++++------
include/linux/mfd/max77686-private.h | 1 -
include/linux/mfd/max77686.h | 28 ----
9 files changed, 166 insertions(+), 182 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists