[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1823150.6k52MgLRcZ@phil>
Date: Thu, 30 Oct 2014 21:17:19 +0100
From: Heiko Stübner <heiko@...ech.de>
To: Caesar Wang <caesar.wang@...k-chips.com>
Cc: rui.zhang@...el.com, edubezval@...il.com, zyf@...k-chips.com,
dianders@...omium.org, linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-doc@...r.kernel.org, cf@...k-chips.com,
dmitry.torokhov@...il.com, dbasehore@...omium.org,
huangtao@...k-chips.com, cjf@...k-chips.com, zhengsq@...k-chips.com
Subject: Re: [PATCH v16 2/5] dt-bindings: document Rockchip thermal
Am Mittwoch, 29. Oktober 2014, 10:32:36 schrieb Caesar Wang:
> This add the necessary binding documentation for the thermal
> found on Rockchip SoCs
>
> Signed-off-by: zhaoyifeng <zyf@...k-chips.com>
> Signed-off-by: Caesar Wang <caesar.wang@...k-chips.com>
> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
> ---
> .../bindings/thermal/rockchip-thermal.txt | 62
> ++++++++++++++++++++++ 1 file changed, 62 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
>
> diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new file
> mode 100644
> index 0000000..3061982
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> @@ -0,0 +1,62 @@
> +* Temperature Sensor ADC (TSADC) on rockchip SoCs
> +
> +Required properties:
> +- compatible : "rockchip,rk3288-tsadc"
> +- reg : physical base address of the controller and length of memory mapped
> + region.
> +- interrupts : The interrupt number to the cpu. The interrupt specifier
> format + depends on the interrupt controller.
> +- clocks : Must contain an entry for each entry in clock-names.
> +- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk"
> for + the peripheral clock.
> +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> +- hw-shut-temp : The hardware-controlled shutdown temperature value. +-
> tsadc-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO. +-
> tsadc-tshut-polarity : The hardware-controlled active polarity 0:LOW
> 1:HIGH. +
> +Exiample:
> +tsadc: tsadc@...80000 {
> + compatible = "rockchip,rk3288-tsadc";
> + reg = <0xff280000 0x100>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
> + clock-names = "tsadc", "apb_pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&otp_out>;
> + #thermal-sensor-cells = <1>;
> + hw-shut-temp = <125000>;
> + tsadc-tshut-mode = <0>;
> + tsadc-tshut-polarity = <0>;
these last 3 seem to be specific to this tsadc so should probably have a
"rockchip,"-prefix
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists