[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1414638733-10080-3-git-send-email-flora.fu@mediatek.com>
Date: Thu, 30 Oct 2014 11:12:12 +0800
From: <flora.fu@...iatek.com>
To: Philipp Zabel <p.zabel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>, <arm@...nel.org>
CC: Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
Grant Likely <grant.likely@...aro.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<srv_heupstream@...iatek.com>,
Sascha Hauer <kernel@...gutronix.de>,
Olof Johansson <olof@...om.net>, Arnd Bergmann <arnd@...db.de>,
Flora Fu <flora.fu@...iatek.com>
Subject: [PATCH 2/3] dt-bindings: Add Reset Controller for MediaTek SoC
From: Flora Fu <flora.fu@...iatek.com>
Add device tree bindings.
Signed-off-by: Flora Fu <flora.fu@...iatek.com>
---
.../devicetree/bindings/reset/mediatek,reset.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt
diff --git a/Documentation/devicetree/bindings/reset/mediatek,reset.txt b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
new file mode 100644
index 0000000..0dd23e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
@@ -0,0 +1,37 @@
+MediaTek SoC Reset Controller
+======================================
+
+Required properties:
+- compatible : "mediatek,reset"
+- #reset-cells: 1
+- mediatek,syscon-reset: The first parameter is refer to the syscon registers base.
+ Follows are reset base address offset and byte width.
+
+example:
+ infrarst: reset-controller@...01030 {
+ #reset-cells = <1>;
+ compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
+ mediatek,syscon-reset = <&infracfg 0x30 0x8>;
+ };
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The reset controller(mtk-reset) manages various reset sources. Those device nodes should
+specify the reset line on the rstc in their resets property, containing a phandle to the
+rstc device node and a RESET_INDEX specifying which module to reset, as described in
+reset.txt.
+
+For MediaTek SoC, RESET_INDEX is reset bit defined in INFRACFG or PERICFG registers.
+
+example:
+pwrap: pwrap@...0f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap-base",
+ "pwrap-bridge-base";
+ resets = <&infrarst 7>, <&perirst 34>;
+ reset-names = "infrarst", "perirst";
+ };
+};
\ No newline at end of file
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists