lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <13873303.38xWyoP4kJ@diego>
Date:	Fri, 31 Oct 2014 11:43:40 +0100
From:	Heiko Stübner <heiko@...ech.de>
To:	Addy Ke <addy.ke@...k-chips.com>
Cc:	robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
	rdunlap@...radead.org, tgih.jun@...sung.com,
	jh80.chung@...sung.com, chris@...ntf.net, ulf.hansson@...aro.org,
	dinguyen@...era.com, olof@...om.net, dianders@...omium.org,
	sonnyrao@...omium.org, devicetree@...r.kernel.org,
	linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-mmc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org, zhenfu.fang@...k-chips.com,
	cf@...k-chips.com, lintao@...k-chips.com, chenfen@...k-chips.com,
	zyf@...k-chips.com, xjq@...k-chips.com, huangtao@...k-chips.com,
	zyw@...k-chips.com, yzq@...k-chips.com, hj@...k-chips.com,
	kever.yang@...k-chips.com, zhangqing@...k-chips.com,
	hl@...k-chips.com
Subject: Re: [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt

Am Freitag, 31. Oktober 2014, 11:50:09 schrieb Addy Ke:
> The bit of sdio interrupt is 16 in designware implementation,
> but it is 24 in RK3288. This patch add sdio_id0 for the number
> of slot0 in the SDIO interrupt registers, which can be set in
> platform DT table, such as:
> - rockchip,sdio-interrupt-slot0 = <8>;

I just checked the manuals of rk3066 and rk3188 - and it seems the sdio 
interrupt is in bit 24 on all of them.

Addy, could you check this and maybe enable this for all two variants we 
currently support?


Thanks
Heiko


> 
> Signed-off-by: Addy Ke <addy.ke@...k-chips.com>
> ---
> Changes in v2:
> - rebase on http://git.linaro.org/git/people/ulf.hansson/mmc.git, next
> branch
> 
>  drivers/mmc/host/dw_mmc-rockchip.c | 13 +++++++++++++
>  drivers/mmc/host/dw_mmc.c          | 12 +++++++-----
>  drivers/mmc/host/dw_mmc.h          |  2 ++
>  include/linux/mmc/dw_mmc.h         |  3 +++
>  4 files changed, 25 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mmc/host/dw_mmc-rockchip.c
> b/drivers/mmc/host/dw_mmc-rockchip.c index bbb4ec3..1cb3bc6 100644
> --- a/drivers/mmc/host/dw_mmc-rockchip.c
> +++ b/drivers/mmc/host/dw_mmc-rockchip.c
> @@ -68,6 +68,18 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host,
> struct mmc_ios *ios) }
>  }
> 
> +static int dw_mci_rk3288_parse_dt(struct dw_mci *host)
> +{
> +	struct device_node *np = host->dev->of_node;
> +	int sdio_id0;
> +
> +	if (!of_property_read_u32(np, "rockchip,sdio-interrupt-slot0",
> +				  &sdio_id0))
> +		host->sdio_id0 = sdio_id0;
> +
> +	return 0;
> +}
> +
>  static const struct dw_mci_drv_data rk2928_drv_data = {
>  	.prepare_command        = dw_mci_rockchip_prepare_command,
>  };
> @@ -76,6 +88,7 @@ static const struct dw_mci_drv_data rk3288_drv_data = {
>  	.prepare_command        = dw_mci_rockchip_prepare_command,
>  	.set_ios		= dw_mci_rk3288_set_ios,
>  	.setup_clock    = dw_mci_rk3288_setup_clock,
> +	.parse_dt	= dw_mci_rk3288_parse_dt,
>  };
> 
>  static const struct of_device_id dw_mci_rockchip_match[] = {
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index bb46b1b..a633b58 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -823,7 +823,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot,
> bool force_clkinit)
> 
>  		/* enable clock; only low power if no SDIO */
>  		clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
> -		if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
> +		if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id)))
>  			clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
>  		mci_writel(host, CLKENA, clk_en_a);
> 
> @@ -1184,10 +1184,10 @@ static void dw_mci_enable_sdio_irq(struct mmc_host
> *mmc, int enb) dw_mci_disable_low_power(slot);
> 
>  		mci_writel(host, INTMASK,
> -			   (int_mask | SDMMC_INT_SDIO(slot->id)));
> +			   (int_mask | SDMMC_INT_SDIO(slot->sdio_id)));
>  	} else {
>  		mci_writel(host, INTMASK,
> -			   (int_mask & ~SDMMC_INT_SDIO(slot->id)));
> +			   (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id)));
>  	}
>  }
> 
> @@ -2056,8 +2056,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void
> *dev_id) /* Handle SDIO Interrupts */
>  		for (i = 0; i < host->num_slots; i++) {
>  			struct dw_mci_slot *slot = host->slot[i];
> -			if (pending & SDMMC_INT_SDIO(i)) {
> -				mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
> +			if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
> +				mci_writel(host, RINTSTS,
> +					   SDMMC_INT_SDIO(slot->sdio_id));
>  				mmc_signal_sdio_irq(slot->mmc);
>  			}
>  		}
> @@ -2145,6 +2146,7 @@ static int dw_mci_init_slot(struct dw_mci *host,
> unsigned int id)
> 
>  	slot = mmc_priv(mmc);
>  	slot->id = id;
> +	slot->sdio_id = host->sdio_id0 + id;
>  	slot->mmc = mmc;
>  	slot->host = host;
>  	host->slot[id] = slot;
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index 71d4995..0562f10 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -214,6 +214,7 @@ extern int dw_mci_resume(struct dw_mci *host);
>   *	with CONFIG_MMC_CLKGATE.
>   * @flags: Random state bits associated with the slot.
>   * @id: Number of this slot.
> + * @sdio_id: Number of this slot in the SDIO interrupt registers.
>   */
>  struct dw_mci_slot {
>  	struct mmc_host		*mmc;
> @@ -233,6 +234,7 @@ struct dw_mci_slot {
>  #define DW_MMC_CARD_PRESENT	0
>  #define DW_MMC_CARD_NEED_INIT	1
>  	int			id;
> +	int			sdio_id;
>  };
> 
>  struct dw_mci_tuning_data {
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 69d0814..72c319f 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -96,6 +96,7 @@ struct mmc_data;
>   * @quirks: Set of quirks that apply to specific versions of the IP.
>   * @irq_flags: The flags to be passed to request_irq.
>   * @irq: The irq value to be passed to request_irq.
> + * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
>   *
>   * Locking
>   * =======
> @@ -191,6 +192,8 @@ struct dw_mci {
>  	bool			vqmmc_enabled;
>  	unsigned long		irq_flags; /* IRQ flags */
>  	int			irq;
> +
> +	int			sdio_id0;
>  };
> 
>  /* DMA ops for Internal/External DMAC interface */

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ