| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGTfZH2fpv3tR3Ah6sHCWAUGS6PhNiQkKEz_ab22ux55-KdRPQ@mail.gmail.com>
Date: Sat, 1 Nov 2014 01:14:16 +0900
From: Chanwoo Choi <cwchoi00@...il.com>
To: Abhilash Kesavan <kesavan.abhilash@...il.com>
Cc: linux-iio@...r.kernel.org, jic23@...nel.org,
Naveen Krishna <naveenkrishna.ch@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] iio: adc: exynos_adc: Add support for ADCv3 on exynos7
Hi Abhilash,
On Fri, Oct 31, 2014 at 11:01 PM, Abhilash Kesavan
<kesavan.abhilash@...il.com> wrote:
> Hi Chanwoo,
>
> Thanks for the quick response.
>
> On Fri, Oct 31, 2014 at 6:17 PM, Chanwoo Choi <cw00.choi@...sung.com> wrote:
>> Hi Abhilash,
>>
>> On 10/31/2014 09:38 PM, Abhilash Kesavan wrote:
>>> The ADC on exynos7 is quite similar to ADCv2. The differences are as
>>> follows:
>>> - v3 has 8 input channels (10 in v2).
>>> - v3 does not include an ADC PHY control register.
>>> - Some ADC_CON2 register bits being used in v2 are listed as
>>> reserved in v3. This results in a different init_hw function
>>> for v3.
>>>
>>> Signed-off-by: Abhilash Kesavan <a.kesavan@...sung.com>
>>> ---
>>> - Based on Naveen's "iio: exynos-adc: use syscon instead of ioremap" patchset
>>> http://comments.gmane.org/gmane.linux.kernel.iio/13943
>>>
>>> .../devicetree/bindings/arm/samsung/exynos-adc.txt | 2 ++
>>> drivers/iio/adc/exynos_adc.c | 32 ++++++++++++++++++++
>>> 2 files changed, 34 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
>>> index c368210..a11e32c 100644
>>> --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
>>> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
>>> @@ -14,6 +14,8 @@ Required properties:
>>> for exynos4412/5250 and s5pv210 controllers.
>>> Must be "samsung,exynos-adc-v2" for
>>> future controllers.
>>> + Must be "samsung,exynos-adc-v3" for
>>> + the ADC in Exynos7 and compatibles
>>
>> I prefer to use 'exynos7-adc' instead of 'exynos-adc-v3'.
>> Exynos7 has little different from existing ADCv2.
>
> Sure, I'll change it. The reason for my choosing v3 was that reading
> the version register (0x20 offset) showed a value of 0x80000009 in
> Exynos7 as against 0x80000008 in both 5420 and 3250.
>>
>> Also, If you want to use 'exynos-adc-v3' compatible,
>> Exynos7's TRM have to include the correct version(v3) infromation.
>
> I could not see any mention of the ADC controller version in the
> Exynos7 UM other than the version register. Does that mean it is v2 ?
So am I. I don't see any version number of ADC in Exynos TRM.
Additionally,
I have a question about Exynos7. If you possible,
did you tell me about full name of Exynos7 SoC (e.g., Exynos5433, Exynos52..)?
Best Regards,
Chanwoo Choi
>
> Regards,
> Abhilash
>>
>> Thanks,
>> Chanwoo Choi
>>
>>
>>
>>> Must be "samsung,exynos3250-adc" for
>>> controllers compatible with ADC of Exynos3250.
>>> Must be "samsung,s3c2410-adc" for
>>> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
>>> index fe03177..74d0a9d 100644
>>> --- a/drivers/iio/adc/exynos_adc.c
>>> +++ b/drivers/iio/adc/exynos_adc.c
>>> @@ -390,6 +390,35 @@ static const struct exynos_adc_data exynos3250_adc_data = {
>>> .start_conv = exynos_adc_v2_start_conv,
>>> };
>>>
>>> +static void exynos_adc_v3_init_hw(struct exynos_adc *info)
>>> +{
>>> + u32 con1, con2;
>>> +
>>> + if (info->data->needs_adc_phy)
>>> + regmap_write(info->pmu_map, info->data->phy_offset, 1);
>>> +
>>> + con1 = ADC_V2_CON1_SOFT_RESET;
>>> + writel(con1, ADC_V2_CON1(info->regs));
>>> +
>>> + con2 = readl(ADC_V2_CON2(info->regs));
>>> + con2 &= ~ADC_V2_CON2_C_TIME(7);
>>> + con2 |= ADC_V2_CON2_C_TIME(0);
>>> + writel(con2, ADC_V2_CON2(info->regs));
>>> +
>>> + /* Enable interrupts */
>>> + writel(1, ADC_V2_INT_EN(info->regs));
>>> +}
>>> +
>>> +static const struct exynos_adc_data exynos_adc_v3_data = {
>>> + .num_channels = MAX_ADC_V1_CHANNELS,
>>> + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
>>> +
>>> + .init_hw = exynos_adc_v3_init_hw,
>>> + .exit_hw = exynos_adc_v2_exit_hw,
>>> + .clear_irq = exynos_adc_v2_clear_irq,
>>> + .start_conv = exynos_adc_v2_start_conv,
>>> +};
>>> +
>>> static const struct of_device_id exynos_adc_match[] = {
>>> {
>>> .compatible = "samsung,s3c2410-adc",
>>> @@ -413,6 +442,9 @@ static const struct of_device_id exynos_adc_match[] = {
>>> .compatible = "samsung,exynos-adc-v2",
>>> .data = &exynos_adc_v2_data,
>>> }, {
>>> + .compatible = "samsung,exynos-adc-v3",
>>> + .data = &exynos_adc_v3_data,
>>> + }, {
>>> .compatible = "samsung,exynos3250-adc",
>>> .data = &exynos3250_adc_data,
>>> },
>>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists