linux-kernel - Re: [PATCH 3/4] arm: boot: dts: am335x-evm: Make charge delay a DT parameter for tsc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5453FA8E.3080204@gmx.de>
Date:	Fri, 31 Oct 2014 22:09:34 +0100
From:	Hartmut Knaack <knaack.h@....de>
To:	Vignesh R <vigneshr@...com>, Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Benoit Cousson <bcousson@...libre.com>,
	Tony Lindgren <tony@...mide.com>,
	Russell King <linux@....linux.org.uk>,
	Jonathan Cameron <jic23@...nel.org>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>
CC:	Lars-Peter Clausen <lars@...afoo.de>,
	Peter Meerwald <pmeerw@...erw.net>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Lee Jones <lee.jones@...aro.org>, Felipe Balbi <balbi@...com>,
	Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
	Jan Kardell <jan.kardell@...liq.com>,
	Paul Gortmaker <paul.gortmaker@...driver.com>,
	Brad Griffis <bgriffis@...com>, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-iio@...r.kernel.org,
	linux-input@...r.kernel.org
Subject: Re: [PATCH 3/4] arm: boot: dts: am335x-evm: Make charge delay
 a DT parameter for tsc

Vignesh R schrieb am 27.10.2014 12:08:
> The charge delay value is by default 0xB000. But it can be set to lower
> values on some boards as long as false pen-ups are avoided. Lowering the
> value increases the sampling rate (though current sampling rate is
> sufficient for tsc operation). Hence charge delay has been made a DT
> parameter.
> 
I would recommend to use a few colons to separate some thoughts. Also, limit to 80 chars per line would be beneficial. See inline.
> Signed-off-by: Vignesh R <vigneshr@...com>
> ---
>  .../devicetree/bindings/input/touchscreen/ti-tsc-adc.txt    | 13 +++++++++++++
>  arch/arm/boot/dts/am335x-evm.dts                            |  1 +
>  2 files changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> index 878549ba814d..ac62769e70e4 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> @@ -28,6 +28,18 @@ Required properties:
>  	ti,adc-channels: List of analog inputs available for ADC.
>  			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
>  
> +Optional properties:
> +- child "tsc"
> +	ti,charge-delay: Length of touch screen charge delay step in terms of
> +			 ADC clock cycles. Charge delay value should be large in order
> +			 to avoid false pen-up events. This value affects the overall
> +			 sampling speed hence need to be kept as low as possible while
<...> speed, hence needs to be <...>
> +			 avoiding false pen-up event. Start from a lower value say 0x400
<...> pen-up events. Start from a lower value, like 0x400, and increase <...>
> +			 and increase value until false pen-up events are avoided. The
> +			 pen-up detection happens immediately after the charge step
<...> charge step, so this <...>
> +			 so this does in fact function as a hardware knob for adjusting
> +			 the amount of "settling time".
> +
>  Example:
>  	tscadc: tscadc@...0d000 {
>  		compatible = "ti,am3359-tscadc";
> @@ -36,6 +48,7 @@ Example:
>  			ti,x-plate-resistance = <200>;
>  			ti,coordiante-readouts = <5>;
>  			ti,wire-config = <0x00 0x11 0x22 0x33>;
> +			ti,charge-delay = <0xB000>;
>  		};
>  
>  		adc {
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index e2156a583de7..80be0462298b 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -641,6 +641,7 @@
>  		ti,x-plate-resistance = <200>;
>  		ti,coordinate-readouts = <5>;
>  		ti,wire-config = <0x00 0x11 0x22 0x33>;
> +		ti,charge-delay = <0xB000>;
>  	};
>  
>  	adc {
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/