| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <545404B3.7000304@gmx.de>
Date: Fri, 31 Oct 2014 22:52:51 +0100
From: Hartmut Knaack <knaack.h@....de>
To: Daniel Baluta <daniel.baluta@...el.com>, jic23@...nel.org,
linux-iio@...r.kernel.org
CC: linux-kernel@...r.kernel.org, irina.tirdea@...el.com
Subject: Re: [PATCH v3 2/7] iio: core: Introduce IIO_ACTIVITY channel
Just some typos left, maybe Jonathan can take care of them, if there are no issues for having a V4.
Daniel Baluta schrieb am 28.10.2014 11:19:
> This channel will be used for exposing information about
> activity composite sensors. Activities supported so far:
> * running
> * jogging
> * walking
> * still
>
> THRESHOLD event is used to signal a change in the activity
> state.
>
> We associate a confidence interval for each activity expressed
> as a percentage from 0 to 100.
> * 0, means the sensor IS NOT reporting that activity.
> * 100, means the sensor IS reporting that activity.
>
> Users of this interface have two possibile means to gather
Typo: possible
> information about the ongoing activities.
>
> 1. Event based, via event file descriptor
> * sensor may report an event when ENTERING an activity or LEAVING
> an activity based on a threshold value.
> * drivers will wake up applications waiting data on the event fd
>
> 2. Polling, by reading the sysfs associated attribute files:
> * /sys/bus/iio/devices/iio:device0/in_activity_running_input
> expressed as percentage confidence value from 0 to 100.
>
> This will offer an interface for Android significant motion
> composite sensor defined here:
> http://source.android.com/devices/sensors/composite_sensors.html
>
> Activities listed above are supported by Freescale's MMA9553 sensor:
> http://freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf
>
> Signed-off-by: Irina Tirdea <irina.tirdea@...el.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@...el.com>
> ---
> Documentation/ABI/testing/sysfs-bus-iio | 44 +++++++++++++++++++++++++++++++++
> drivers/iio/industrialio-core.c | 5 ++++
> include/linux/iio/types.h | 7 +++++-
> 3 files changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index 5a7fc66..c3a1fd3 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -783,6 +783,40 @@ Description:
> met before an event is generated. If direction is not
> specified then this period applies to both directions.
>
> +What: /sys/.../events/in_activity_still_thresh_rising_en
> +What: /sys/.../events/in_activity_still_thresh_falling_en
> +What: /sys/.../events/in_activity_walking_thresh_rising_en
> +What: /sys/.../events/in_activity_walking_thresh_falling_en
> +What: /sys/.../events/in_activity_jogging_thresh_rising_en
> +What: /sys/.../events/in_activity_jogging_thresh_falling_en
> +What: /sys/.../events/in_activity_running_thresh_rising_en
> +What: /sys/.../events/in_activity_running_thresh_falling_en
> +KernelVersion: 3.19
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Enables or disables activitity events. Depending on direction
> + an event is generated when sensor ENTERS or LEAVES a given state.
> +
> +What: /sys/.../events/in_activity_still_thresh_rising_value
> +What: /sys/.../events/in_activity_still_thresh_falling_value
> +What: /sys/.../events/in_activity_walking_thresh_rising_value
> +What: /sys/.../events/in_activity_walking_thresh_falling_value
> +What: /sys/.../events/in_activity_jogging_thresh_rising_value
> +What: /sys/.../events/in_activity_jogging_thresh_falling_value
> +What: /sys/.../events/in_activity_running_thresh_rising_value
> +What: /sys/.../events/in_activity_running_thresh_falling_value
> +KernelVersion: 3.19
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + Confidence value (in units as percentage) to be used
> + for deciding when an event should be generated. E.g for
> + running: If the confidence value reported by the sensor
> + is greater then in_activity_running_thresh_rising_value
Typo: greater than
> + then the sensor ENTERS running state. Conversely, if the
> + confidence value reported by the sensor is lower than
> + in_activity_running_thresh_falling_value then the sensor
> + is LEAVING running state.
> +
> What: /sys/.../iio:deviceX/events/in_accel_mag_en
> What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en
> What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en
> @@ -949,6 +983,16 @@ Description:
> and the relevant _type attributes to establish the data storage
> format.
>
> +What: /sys/.../iio:deviceX/in_activity_still_input
> +What: /sys/.../iio:deviceX/in_activity_walking_input
> +What: /sys/.../iio:deviceX/in_activity_jogging_input
> +What: /sys/.../iio:deviceX/in_activity_running_input
> +KernelVersion: 3.19
> +Contact: linux-iio@...r.kernel.org
> +Description:
> + This attribute is used to read the confidence for an activity
> + expressed in units as percentage.
> +
> What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
> KernelVersion: 2.6.38
> Contact: linux-iio@...r.kernel.org
> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
> index af3e76d..e453ef9 100644
> --- a/drivers/iio/industrialio-core.c
> +++ b/drivers/iio/industrialio-core.c
> @@ -70,6 +70,7 @@ static const char * const iio_chan_type_name_spec[] = {
> [IIO_CCT] = "cct",
> [IIO_PRESSURE] = "pressure",
> [IIO_HUMIDITYRELATIVE] = "humidityrelative",
> + [IIO_ACTIVITY] = "activity",
> };
>
> static const char * const iio_modifier_names[] = {
> @@ -91,6 +92,10 @@ static const char * const iio_modifier_names[] = {
> [IIO_MOD_NORTH_TRUE] = "from_north_true",
> [IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
> [IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
> + [IIO_MOD_RUNNING] = "running",
> + [IIO_MOD_JOGGING] = "jogging",
> + [IIO_MOD_WALKING] = "walking",
> + [IIO_MOD_STILL] = "still",
> };
>
> /* relies on pairs of these shared then separate */
> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
> index 4a2af8a..b3a241d 100644
> --- a/include/linux/iio/types.h
> +++ b/include/linux/iio/types.h
> @@ -30,6 +30,7 @@ enum iio_chan_type {
> IIO_CCT,
> IIO_PRESSURE,
> IIO_HUMIDITYRELATIVE,
> + IIO_ACTIVITY,
> };
>
> enum iio_modifier {
> @@ -59,7 +60,11 @@ enum iio_modifier {
> IIO_MOD_NORTH_MAGN,
> IIO_MOD_NORTH_TRUE,
> IIO_MOD_NORTH_MAGN_TILT_COMP,
> - IIO_MOD_NORTH_TRUE_TILT_COMP
> + IIO_MOD_NORTH_TRUE_TILT_COMP,
> + IIO_MOD_RUNNING,
> + IIO_MOD_JOGGING,
> + IIO_MOD_WALKING,
> + IIO_MOD_STILL,
> };
>
> enum iio_event_type {
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists