| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1415003590-30485-8-git-send-email-dudl@cypress.com>
Date: Mon, 3 Nov 2014 16:32:59 +0800
From: Dudley Du <dudley.dulixin@...il.com>
To: dmitry.torokhov@...il.com, rydberg@...omail.se
Cc: Dudley Du <dudl@...ress.com>, bleung@...gle.com,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v9 07/18] input: cyapa: add sysfs interfaces supported in the cyapa driver
Add device's basic control and features supported in cyapa driver through
sysfs file system interfaces. These interfaces are commonly used in
pre- and after production, for trackpad device state checking, managing
and firmware image updating.
These interfaces including firmware_version and product_id interfaces
for reading firmware version and trackpad device product id values,
and including update_fw interface to command firmware image update
process. Also including baseline and calibrate interfaces for
reading and checking trackpad device's sensors states.
TEST=test on Chromebooks.
Signed-off-by: Dudley Du <dudl@...ress.com>
---
drivers/input/mouse/cyapa.c | 220 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 220 insertions(+)
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index d4b7c42..5f384ff 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -709,6 +709,213 @@ static int cyapa_start_runtime(struct cyapa *cyapa)
}
#endif /* CONFIG_PM_RUNTIME */
+static ssize_t cyapa_show_fm_ver(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+
+ ret = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (ret)
+ return ret;
+ ret = scnprintf(buf, PAGE_SIZE, "%d.%d\n", cyapa->fw_maj_ver,
+ cyapa->fw_min_ver);
+ mutex_unlock(&cyapa->state_sync_lock);
+ return ret;
+}
+
+static ssize_t cyapa_show_product_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+
+ ret = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (ret)
+ return ret;
+ ret = scnprintf(buf, PAGE_SIZE, "%s\n", cyapa->product_id);
+ mutex_unlock(&cyapa->state_sync_lock);
+ return ret;
+}
+
+static int cyapa_firmware(struct cyapa *cyapa, const char *fw_name)
+{
+ struct device *dev = &cyapa->client->dev;
+ int ret;
+ const struct firmware *fw;
+
+ ret = request_firmware(&fw, fw_name, dev);
+ if (ret) {
+ dev_err(dev, "Could not load firmware from %s, %d\n",
+ fw_name, ret);
+ return ret;
+ }
+
+ if (cyapa->ops->check_fw) {
+ ret = cyapa->ops->check_fw(cyapa, fw);
+ if (ret) {
+ dev_err(dev, "Invalid CYAPA firmware image: %s\n",
+ fw_name);
+ goto done;
+ }
+ } else {
+ dev_err(dev, "No valid device ops->check_fw handler set.\n");
+ ret = -ENODEV;
+ goto done;
+ }
+
+ /*
+ * Resume the potentially suspended device because doing FW
+ * update on a device not in the FULL mode has a chance to
+ * fail.
+ */
+ pm_runtime_get_sync(dev);
+
+ if (cyapa->ops->bl_enter) {
+ ret = cyapa->ops->bl_enter(cyapa);
+ if (ret)
+ goto err_detect;
+ }
+
+ if (cyapa->ops->bl_activate) {
+ ret = cyapa->ops->bl_activate(cyapa);
+ if (ret)
+ goto err_detect;
+ }
+
+ if (cyapa->ops->bl_initiate) {
+ ret = cyapa->ops->bl_initiate(cyapa, fw);
+ if (ret)
+ goto err_detect;
+ }
+
+ if (cyapa->ops->update_fw) {
+ ret = cyapa->ops->update_fw(cyapa, fw);
+ if (ret)
+ goto err_detect;
+ }
+
+ if (cyapa->ops->bl_verify_app_integrity) {
+ ret = cyapa->ops->bl_verify_app_integrity(cyapa);
+ if (ret)
+ goto err_detect;
+ }
+
+err_detect:
+ pm_runtime_put_noidle(dev);
+
+done:
+ release_firmware(fw);
+ return ret;
+}
+
+static ssize_t cyapa_update_fw_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ char fw_name[64];
+ int ret;
+
+ if (count > 64) {
+ dev_err(dev, "File name too long\n");
+ return -EINVAL;
+ }
+
+ memcpy(fw_name, buf, count);
+ if (fw_name[count - 1] == '\n')
+ fw_name[count - 1] = '\0';
+ else
+ fw_name[count] = '\0';
+
+ ret = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (ret)
+ return ret;
+
+ ret = cyapa_firmware(cyapa, fw_name);
+ if (ret)
+ dev_err(dev, "firmware update failed, %d\n", ret);
+ else
+ dev_dbg(dev, "firmware update successfully done.\n");
+
+ /*
+ * Redetect trackpad device states because firmware update process
+ * will reset trackpad device into bootloader mode.
+ */
+ cyapa_detect(cyapa);
+
+ mutex_unlock(&cyapa->state_sync_lock);
+
+ return ret ? ret : count;
+}
+
+static ssize_t cyapa_calibrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int ret;
+
+ ret = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (ret)
+ return ret;
+
+ if (!cyapa->ops->calibrate_store) {
+ dev_err(dev, "Calibrate operation not supported.\n");
+ ret = -ENOTSUPP;
+ } else
+ ret = cyapa->ops->calibrate_store(dev, attr, buf, count);
+
+ mutex_unlock(&cyapa->state_sync_lock);
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t cyapa_show_baseline(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ ssize_t ret;
+
+ ret = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (ret)
+ return ret;
+
+ if (!cyapa->ops->show_baseline) {
+ dev_err(dev, "Calibrate operation not supported.\n");
+ ret = -ENOTSUPP;
+ } else
+ ret = cyapa->ops->show_baseline(dev, attr, buf);
+
+ mutex_unlock(&cyapa->state_sync_lock);
+ return ret;
+}
+
+static DEVICE_ATTR(firmware_version, S_IRUGO, cyapa_show_fm_ver, NULL);
+static DEVICE_ATTR(product_id, S_IRUGO, cyapa_show_product_id, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, cyapa_update_fw_store);
+static DEVICE_ATTR(baseline, S_IRUGO, cyapa_show_baseline, NULL);
+static DEVICE_ATTR(calibrate, S_IWUSR, NULL, cyapa_calibrate_store);
+
+static struct attribute *cyapa_sysfs_entries[] = {
+ &dev_attr_firmware_version.attr,
+ &dev_attr_product_id.attr,
+ &dev_attr_update_fw.attr,
+ &dev_attr_baseline.attr,
+ &dev_attr_calibrate.attr,
+ NULL,
+};
+
+static const struct attribute_group cyapa_sysfs_group = {
+ .attrs = cyapa_sysfs_entries,
+};
+
+static void cyapa_remove_sysfs_group(void *data)
+{
+ struct cyapa *cyapa = data;
+
+ sysfs_remove_group(&cyapa->client->dev.kobj, &cyapa_sysfs_group);
+}
+
/*
* Returns:
* 0 Driver and device initialization successfully done.
@@ -792,6 +999,19 @@ static int cyapa_probe(struct i2c_client *client,
return ret;
}
+ ret = sysfs_create_group(&client->dev.kobj, &cyapa_sysfs_group);
+ if (ret) {
+ dev_err(dev, "failed to create sysfs entries, (%d)\n", ret);
+ return ret;
+ }
+
+ ret = devm_add_action(dev, cyapa_remove_sysfs_group, cyapa);
+ if (ret) {
+ cyapa_remove_sysfs_group(cyapa);
+ dev_err(dev, "failed to add sysfs cleanup action, (%d)\n", ret);
+ return ret;
+ }
+
#ifdef CONFIG_PM_SLEEP
if (device_can_wakeup(dev)) {
ret = sysfs_merge_group(&client->dev.kobj,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists