linux-kernel - Re: [PATCH v4] media: spi: Add support for LMH0395

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <545784DA.50109@xs4all.nl>
Date:	Mon, 03 Nov 2014 14:36:26 +0100
From:	Hans Verkuil <hverkuil@...all.nl>
To:	Laurent Pinchart <laurent.pinchart@...asonboard.com>,
	Jean-Michel Hautbois <jean-michel.hautbois@...alys.com>
CC:	linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org, m.chehab@...sung.com
Subject: Re: [PATCH v4] media: spi: Add support for LMH0395

On 11/03/2014 02:13 PM, Laurent Pinchart wrote:
> Hi Jean-Michel,
> 
> Thank you for the patch.
> 
> On Wednesday 10 September 2014 11:43:54 Jean-Michel Hautbois wrote:

<snip>

> 
>> +static int lmh0395_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
>> +				u32 config)
>> +{
>> +	struct lmh0395_state *state = to_state(sd);
>> +	int err = 0;
>> +
>> +	if (state->output_type != output)
>> +		err = lmh0395_set_output_type(sd, output);
>> +
>> +	return err;
> 
>         if (state->output_type == output)
>                 return 0;
> 
>         return lmh0395_set_output_type(sd, output);
> 
> You can then get rid of the err variable.
> 
> I don't really like this implementation though, the output argument is device-
> specific, you thus require explicit knowledge of the LMH0395 in your bridge 
> driver.

Well, that's the way s_routing is defined. It's the bridge driver's job to
translate between V4L2 inputs/outputs and low-level routing information.

> 
> I'm not sure what the config argument is used for, but naively I would have 

config is normally not used. There are one or two drivers that need it for
additional routing configuration, but it's rare.

> used it to tell whether to enable (1) or disable (0) the route from input to 
> output. The input value should then always be 0, and the output value can be 1 
> or 2. Another option would be to use the new S_ROUTING userspace ioctl I've 
> proposed in 
> http://git.linuxtv.org/cgit.cgi/pinchartl/media.git/commit/?h=xilinx-wip&id=fc094c354338861673464ed4b8fa198089fe7bf0.
> 
> Hans, could you comment on that ?

Well, first of all your proposed API isn't merged yet, or even posted on the
mailinglist, so it's a bit unfair to require someone else to use it :-)

Also, while I do agree with your proposed new API I am a lot less enthusiastic
about creating yet another duplicate pad op for an existing audio/video routing
op.

The problem is that existing drivers are never updated for the new op and you are
stuck with competing internal APIs. Not nice at all.

Bottom line is that this driver uses s_routing like any other driver currently
in the kernel, so I have no problem with that.

Regards,

	Hans

> 
>> +}

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/