| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1415118024-194247-8-git-send-email-dzickus@redhat.com>
Date: Tue, 4 Nov 2014 11:20:22 -0500
From: Don Zickus <dzickus@...hat.com>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: Ingo Molnar <mingo@...e.hu>, LKML <linux-kernel@...r.kernel.org>,
uobergfe@...hat.com, Don Zickus <dzickus@...hat.com>
Subject: [PATCH 7/9] watchdog: enable the new user interface of the watchdog mechanism
From: Ulrich Obergfell <uobergfe@...hat.com>
With the current user interface of the watchdog mechanism it is only
possible to disable or enable both lockup detectors at the same time.
This series introduces new kernel parameters and changes the semantics
of some existing kernel parameters, so that the hard lockup detector
and the soft lockup detector can be disabled or enabled individually.
With this series applied, the user interface is as follows.
- parameters in /proc/sys/kernel
. soft_watchdog
This is a new parameter to control and examine the run state of
the soft lockup detector.
. nmi_watchdog
The semantics of this parameter have changed. It can now be used
to control and examine the run state of the hard lockup detector.
. watchdog
This parameter is still available to control the run state of both
lockup detectors at the same time. If this parameter is examined,
it shows the logical OR of soft_watchdog and nmi_watchdog.
. watchdog_thresh
The semantics of this parameter are not affected by the patch.
- kernel command line parameters
. nosoftlockup
The semantics of this parameter have changed. It can now be used
to disable the soft lockup detector at boot time.
. nmi_watchdog=0 or nmi_watchdog=1
Disable or enable the hard lockup detector at boot time. The patch
introduces '=1' as a new option.
. nowatchdog
The semantics of this parameter are not affected by the patch. It
is still available to disable both lockup detectors at boot time.
Also, remove the proc_dowatchdog() function which is no longer needed.
Signed-off-by: Ulrich Obergfell <uobergfe@...hat.com>
Signed-off-by: Don Zickus <dzickus@...hat.com>
---
include/linux/nmi.h | 2 -
kernel/sysctl.c | 35 +++++++++++++++-------
kernel/watchdog.c | 81 ++++++++++-----------------------------------------
3 files changed, 40 insertions(+), 78 deletions(-)
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 5b54505..0426357 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -82,8 +82,6 @@ extern int proc_soft_watchdog(struct ctl_table *, int ,
void __user *, size_t *, loff_t *);
extern int proc_watchdog_thresh(struct ctl_table *, int ,
void __user *, size_t *, loff_t *);
-extern int proc_dowatchdog(struct ctl_table *, int ,
- void __user *, size_t *, loff_t *);
#endif
#ifdef CONFIG_HAVE_ACPI_APEI_NMI
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 4aada6d..1875cf0 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -838,7 +838,7 @@ static struct ctl_table kern_table[] = {
.data = &watchdog_user_enabled,
.maxlen = sizeof (int),
.mode = 0644,
- .proc_handler = proc_dowatchdog,
+ .proc_handler = proc_watchdog,
.extra1 = &zero,
.extra2 = &one,
},
@@ -847,11 +847,33 @@ static struct ctl_table kern_table[] = {
.data = &watchdog_thresh,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = proc_dowatchdog,
+ .proc_handler = proc_watchdog_thresh,
.extra1 = &zero,
.extra2 = &sixty,
},
{
+ .procname = "nmi_watchdog",
+ .data = &nmi_watchdog_enabled,
+ .maxlen = sizeof (int),
+ .mode = 0644,
+ .proc_handler = proc_nmi_watchdog,
+ .extra1 = &zero,
+#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
+ .extra2 = &one,
+#else
+ .extra2 = &zero,
+#endif
+ },
+ {
+ .procname = "soft_watchdog",
+ .data = &soft_watchdog_enabled,
+ .maxlen = sizeof (int),
+ .mode = 0644,
+ .proc_handler = proc_soft_watchdog,
+ .extra1 = &zero,
+ .extra2 = &one,
+ },
+ {
.procname = "softlockup_panic",
.data = &softlockup_panic,
.maxlen = sizeof(int),
@@ -871,15 +893,6 @@ static struct ctl_table kern_table[] = {
.extra2 = &one,
},
#endif /* CONFIG_SMP */
- {
- .procname = "nmi_watchdog",
- .data = &watchdog_user_enabled,
- .maxlen = sizeof (int),
- .mode = 0644,
- .proc_handler = proc_dowatchdog,
- .extra1 = &zero,
- .extra2 = &one,
- },
#endif
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
{
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 86ba5e5..7043274 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -110,15 +110,9 @@ static int __init hardlockup_panic_setup(char *str)
else if (!strncmp(str, "nopanic", 7))
hardlockup_panic = 0;
else if (!strncmp(str, "0", 1))
- watchdog_user_enabled = 0;
- else if (!strncmp(str, "1", 1) || !strncmp(str, "2", 1)) {
- /*
- * Setting 'nmi_watchdog=1' or 'nmi_watchdog=2' (legacy option)
- * has the same effect.
- */
- watchdog_user_enabled = 1;
- watchdog_enable_hardlockup_detector(true);
- }
+ watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
+ else if (!strncmp(str, "1", 1))
+ watchdog_enabled |= NMI_WATCHDOG_ENABLED;
return 1;
}
__setup("nmi_watchdog=", hardlockup_panic_setup);
@@ -137,19 +131,18 @@ __setup("softlockup_panic=", softlockup_panic_setup);
static int __init nowatchdog_setup(char *str)
{
- watchdog_user_enabled = 0;
+ watchdog_enabled = 0;
return 1;
}
__setup("nowatchdog", nowatchdog_setup);
-/* deprecated */
static int __init nosoftlockup_setup(char *str)
{
- watchdog_user_enabled = 0;
+ watchdog_enabled &= ~SOFT_WATCHDOG_ENABLED;
return 1;
}
__setup("nosoftlockup", nosoftlockup_setup);
-/* */
+
#ifdef CONFIG_SMP
static int __init softlockup_all_cpu_backtrace_setup(char *str)
{
@@ -264,10 +257,11 @@ static int is_softlockup(unsigned long touch_ts)
{
unsigned long now = get_timestamp();
- /* Warn about unreasonable delays: */
- if (time_after(now, touch_ts + get_softlockup_thresh()))
- return now - touch_ts;
-
+ if (watchdog_enabled & SOFT_WATCHDOG_ENABLED) {
+ /* Warn about unreasonable delays. */
+ if (time_after(now, touch_ts + get_softlockup_thresh()))
+ return now - touch_ts;
+ }
return 0;
}
@@ -526,6 +520,10 @@ static int watchdog_nmi_enable(unsigned int cpu)
struct perf_event_attr *wd_attr;
struct perf_event *event = per_cpu(watchdog_ev, cpu);
+ /* nothing to do if the hard lockup detector is disabled */
+ if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
+ goto out;
+
/*
* Some kernels need to default hard lockup detection to
* 'disabled', for example a guest on a hypervisor.
@@ -844,59 +842,12 @@ out:
mutex_unlock(&watchdog_proc_mutex);
return err;
}
-
-/*
- * proc handler for /proc/sys/kernel/nmi_watchdog,watchdog_thresh
- */
-
-int proc_dowatchdog(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- int err, old_thresh, old_enabled;
- bool old_hardlockup;
-
- mutex_lock(&watchdog_proc_mutex);
- old_thresh = ACCESS_ONCE(watchdog_thresh);
- old_enabled = ACCESS_ONCE(watchdog_user_enabled);
- old_hardlockup = watchdog_hardlockup_detector_is_enabled();
-
- err = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
- if (err || !write)
- goto out;
-
- set_sample_period();
- /*
- * Watchdog threads shouldn't be enabled if they are
- * disabled. The 'watchdog_running' variable check in
- * watchdog_*_all_cpus() function takes care of this.
- */
- if (watchdog_user_enabled && watchdog_thresh) {
- /*
- * Prevent a change in watchdog_thresh accidentally overriding
- * the enablement of the hardlockup detector.
- */
- if (watchdog_user_enabled != old_enabled)
- watchdog_enable_hardlockup_detector(true);
- err = watchdog_enable_all_cpus(old_thresh != watchdog_thresh);
- } else
- watchdog_disable_all_cpus();
-
- /* Restore old values on failure */
- if (err) {
- watchdog_thresh = old_thresh;
- watchdog_user_enabled = old_enabled;
- watchdog_enable_hardlockup_detector(old_hardlockup);
- }
-out:
- mutex_unlock(&watchdog_proc_mutex);
- return err;
-}
#endif /* CONFIG_SYSCTL */
void __init lockup_detector_init(void)
{
set_sample_period();
- if (watchdog_user_enabled)
+ if (watchdog_enabled)
watchdog_enable_all_cpus(false);
}
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists