Message-ID: <C89EFD3CD56F64468D3D206D683A8D22039FFC5F@ldam-msx2.fugro-nl.local>
Date:	Wed, 5 Nov 2014 13:04:37 +0100
From:	"Stam, Michel [FINT]" <M.Stam@...ro.nl>
To:	"Charles Keepax" <ckeepax@...nsource.wolfsonmicro.com>
Cc:	"Riku Voipio" <riku.voipio@....fi>, <davem@...emloft.net>,
	<linux-usb@...r.kernel.org>, <netdev@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <linux-samsung-soc@...r.kernel.org>
Subject: RE: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net onarndale platform

Hello Charles,

After looking around I found the reset value for the 8772 chip, which
seems to be 0x1E1 (ANAR register).

This equates to (according to include/uapi/linux/mii.h)
ADVERTISE_ALL | ADVERTISE_CSMA.

The register only seems to become 0 if the software reset fails.

Unfortunately, this is exactly what I get when the patch is applied;
asix 1-2:1.0 eth1: Failed to send software reset: ffffffb5
asix 1-2:1.0 eth1: link reset failed (-75) usbnet usb-0000:00:1d.0-2, 
ASIX AX88772 USB 2.0 Ethernet
asix 1-2:1.0 eth1: Failed to send software reset: ffffffb5
asix 1-2:1.0 eth1: link reset failed (-75) usbnet usb-0000:00:1d.0-2, 
ASIX AX88772 USB 2.0 Ethernet

A little while after this its 'Failed to enable software MII access'.
The ethernet device fails to see any link or accept any ethtool -s
command.

My device has vid:devid 0b95:772a (ASIX Elec. Corp.).

Can you tell me what device is on the Andale platform, Charles? Same
vendor/device id?

Another thing that bothers me is that dev->mii.advertising seems to
contain the same value, so maybe that can be used instead of a call to
asix_mdio_read(). Can anyone comment on its purpose? Should it be a
shadow copy of the real register or something?

Riku, can you test Charles' patch as well?

Kind regards,

Michel Stam

-----Original Message-----
From: Charles Keepax [mailto:ckeepax@...nsource.wolfsonmicro.com] 
Sent: Tuesday, November 04, 2014 21:09 PM
To: Stam, Michel [FINT]
Cc: Riku Voipio; davem@...emloft.net; linux-usb@...r.kernel.org;
netdev@...r.kernel.org; linux-kernel@...r.kernel.org;
linux-samsung-soc@...r.kernel.org
Subject: Re: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net
onarndale platform

On Tue, Nov 04, 2014 at 11:23:06AM +0100, Stam, Michel [FINT] wrote:
> Hello Riku,
> 
> >Fixing a bug (ethtool support) must not cause breakage elsewhere (in
> this case on arndale). This is now a regression of functionality from 
> 3.17.
> >
> >I think it would better to revert the change now and with less hurry
> introduce a ethtool fix that doesn't break arndale.
> 
> I don't fully agree here;
> I would like to point out that this commit is a revert itself. Fixing 
> the armdale will then cause breakage in other implementations, such as

> ours. Blankly reverting breaks other peoples' implementations.
> 
> The PHY reset is the thing that breaks ethtool support, so any fix 
> that appeases all would have to take existing PHY state into account.
> 
> I'm not an expert on the ASIX driver, nor the MII, but I think this is

> the cause;
> drivers/net/usb/asix_devices.c:
>    361      asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
> BMCR_RESET);
>    362      asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
>    363              ADVERTISE_ALL | ADVERTISE_CSMA);
>    364      mii_nway_restart(&dev->mii);
> 
> I would think that the ADVERTISE_ALL is the cause here, as it will 
> reset the MII back to default, thus overriding ethtool settings.
> Would an:
> Int reg;
> reg = asix_mdio_read(dev->net,dev->mii.phy_id,MII_ADVERTISE);
> 
> prior to the offending lines, and then;
> 
>    362      asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
>    363             reg);
> 
> solve the problem for you guys?

If I revert the patch in question and add this in:

--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -299,6 +299,7 @@ static int ax88772_reset(struct usbnet *dev)  {
        struct asix_data *data = (struct asix_data *)&dev->data;
        int ret, embd_phy;
+       int reg;
        u16 rx_ctl;

        ret = asix_write_gpio(dev,
@@ -359,8 +360,10 @@ static int ax88772_reset(struct usbnet *dev)
        msleep(150);

        asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
BMCR_RESET);
-       asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-                       ADVERTISE_ALL | ADVERTISE_CSMA);
+       reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+       if (!reg)
+               reg = ADVERTISE_ALL | ADVERTISE_CSMA;
+       asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, reg);
        mii_nway_restart(&dev->mii);

        ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT);

Then things work on Arndale for me. Does that work for you?
Whether that is a sensible fix I don't know however.

> 
> Mind, maybe the read function should take into account the reset value

> of the MII, and set it to ADVERTISE_ALL | ADVERTISE_CSMA. I don't have

> any documention here at the moment.

Yeah I also have no documentation.

Thanks,
Charles

> 
> Is anyone able to confirm my suspicions?
> 
> Kind regards,
> 
> Michel Stam
> -----Original Message-----
> From: Riku Voipio [mailto:riku.voipio@....fi]
> Sent: Tuesday, November 04, 2014 10:44 AM
> To: Stam, Michel [FINT]
> Cc: Riku Voipio; davem@...emloft.net; linux-usb@...r.kernel.org; 
> netdev@...r.kernel.org; linux-kernel@...r.kernel.org; 
> linux-samsung-soc@...r.kernel.org; ckeepax@...nsource.wolfsonmicro.com
> Subject: Re: "asix: Don't reset PHY on if_up for ASIX 88772" breaks 
> net on arndale platform
> 
> On Tue, Nov 04, 2014 at 09:19:26AM +0100, Stam, Michel [FINT] wrote:
> > Interesting, as the commit itself is a revert from a kernel back to
> > 2.6 somewhere. The problem I had is related to the PHY being reset 
> > on interface-up, can you confirm that you require this?
> 
> I can't confirm what exactly is needed on arndale. I'm neither expert 
> in USB or ethernet. However, I can confirm that without the PHY reset,

> networking doesn't work on arndale.
> 
> I now see someone else has the same problem, adding Charles to CC.
> 
> http://www.spinics.net/lists/linux-usb/msg116656.html
> 
> > Reverting this
> > breaks ethtool support in turn.
> 
> Fixing a bug (ethtool support) must not cause breakage elsewhere (in 
> this case on arndale). This is now a regression of functionality from 
> 3.17.
> 
> I think it would better to revert the change now and with less hurry 
> introduce a ethtool fix that doesn't break arndale.
>  
> > Kind regards,
> > 
> > Michel Stam
> > 
> > -----Original Message-----
> > From: Riku Voipio [mailto:riku.voipio@....fi]
> > Sent: Tuesday, November 04, 2014 8:23 AM
> > To: davem@...emloft.net; Stam, Michel [FINT]
> > Cc: linux-usb@...r.kernel.org; netdev@...r.kernel.org; 
> > linux-kernel@...r.kernel.org; linux-samsung-soc@...r.kernel.org
> > Subject: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net 
> > on
> 
> > arndale platform
> > 
> > Hi,
> > 
> > With 3.18-rc3, asix on arndale (samsung exynos 5250 based board), 
> > fails to work. Interface is initialized but network traffic seem not

> > to pass through. With kernel IP config the result looks like:
> > 
> > [    3.323275] usb 3-3.2.4: new high-speed USB device number 4 using
> > exynos-ehci
> > [    3.419151] usb 3-3.2.4: New USB device found, idVendor=0b95,
> > idProduct=772a
> > [    3.424735] usb 3-3.2.4: New USB device strings: Mfr=1,
Product=2,
> > SerialNumber=3
> > [    3.432196] usb 3-3.2.4: Product: AX88772 
> > [    3.436279] usb 3-3.2.4: Manufacturer: ASIX Elec. Corp.
> > [    3.441486] usb 3-3.2.4: SerialNumber: 000001
> > [    3.447530] asix 3-3.2.4:1.0 (unnamed net_device)
(uninitialized):
> > invalid hw address, using random
> > [    3.764352] asix 3-3.2.4:1.0 eth0: register 'asix' at
> > usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet,
> de:a2:66:bf:ca:4f
> > [    4.488773] asix 3-3.2.4:1.0 eth0: link down
> > [    5.690025] asix 3-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex,
> lpa
> > 0xC5E1
> > [    5.712947] Sending DHCP requests ...... timed out!
> > [   83.165303] IP-Config: Retrying forever (NFS root)...
> > [   83.170397] asix 3-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex,
> lpa
> > 0xC5E1
> > [   83.192944] Sending DHCP requests .....
> > 
> > Similar results also with dhclient. Git bisect identified the 
> > breaking
> 
> > commit as:
> > 
> > commit 3cc81d85ee01e5a0b7ea2f4190e2ed1165f53c31
> > Author: Michel Stam <m.stam@...ro.nl>
> > Date:   Thu Oct 2 10:22:02 2014 +0200
> > 
> >     asix: Don't reset PHY on if_up for ASIX 88772
> > 
> > Taking 3.18-rc3 and that commit reverted, network works again:
> > 
> > [    3.303500] usb 3-3.2.4: new high-speed USB device number 4 using
> > exynos-ehci
> > [    3.399375] usb 3-3.2.4: New USB device found, idVendor=0b95,
> > idProduct=772a
> > [    3.404963] usb 3-3.2.4: New USB device strings: Mfr=1,
Product=2,
> > SerialNumber=3
> > [    3.412424] usb 3-3.2.4: Product: AX88772 
> > [    3.416508] usb 3-3.2.4: Manufacturer: ASIX Elec. Corp.
> > [    3.421715] usb 3-3.2.4: SerialNumber: 000001
> > [    3.427755] asix 3-3.2.4:1.0 (unnamed net_device)
(uninitialized):
> > invalid hw address, using random
> > [    3.744837] asix 3-3.2.4:1.0 eth0: register 'asix' at
> > usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet,
> 12:59:f1:a8:43:90
> > [    7.098998] asix 3-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex,
> lpa
> > 0xC5E1
> > [    7.118258] Sending DHCP requests ., OK
> > [    9.753259] IP-Config: Got DHCP answer from 192.168.1.1, my
address
> > is 192.168.1.111
> > 
> > There might something wrong on the samsung platform code (I 
> > understand
> 
> > the USB on arndale is "funny"), but this is still an regression from

> > 3.17.
> > 
> > Riku
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists