[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <A765B125120D1346A63912DDE6D8B6315EA24E@NTXXIAMBX02.xacn.micron.com>
Date: Thu, 6 Nov 2014 03:09:06 +0000
From: bpqw <bpqw@...ron.com>
To: Marek Vasut <marex@...x.de>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>
CC: "shijie8@...il.com" <shijie8@...il.com>,
"geert+renesas@...der.be" <geert+renesas@...der.be>,
"grmoore@...era.com" <grmoore@...era.com>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
bpqw <bpqw@...ron.com>
Subject: [V5 PATCH 1/1] driver:mtd:spi-nor: Add quad I/O support for Micron
spi nor
This patch adds code which enables Quad I/O mode on Micron SPI NOR flashes.
For Micron SPI NOR flash,enabling or disabling quad I/O protocol is controlled
by EVCR (Enhanced Volatile Configuration Register), Quad I/O protocol bit 7.
When EVCR bit 7 is reset to 0,the SPI NOR flash will operate in quad I/O mode.
Signed-off-by: bean huo <beanhuo@...ron.com>
Acked-by: Marek Vasut <marex@...x.de>
---
v1-v2:
Modified to that capture wait_till_ready()
return value,if error,directly return its
the value.
v2-v3:
Directly use the reurning error value of
read_reg and write_reg,instead of -EINVAL.
v3-v4:
Modify commit logs that wraped into 80 columns
v4-v5:
Rebuild new patch based on latest linux-mtd
drivers/mtd/spi-nor/spi-nor.c | 46 +++++++++++++++++++++++++++++++++++++++++
include/linux/mtd/spi-nor.h | 6 ++++++
2 files changed, 52 insertions(+)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index c51ee52..2a31742 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -874,6 +874,45 @@ static int spansion_quad_enable(struct spi_nor *nor)
return 0;
}
+static int micron_quad_enable(struct spi_nor *nor)
+{
+ int ret, val;
+
+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
+ if (ret < 0) {
+ dev_err(nor->dev, "error %d reading EVCR\n", ret);
+ return ret;
+ }
+
+ write_enable(nor);
+
+ /* set EVCR ,enable quad I/O */
+ nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON;
+ ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0);
+ if (ret < 0) {
+ dev_err(nor->dev,
+ "error while writing EVCR register\n");
+ return ret;
+ }
+
+ ret = wait_till_ready(nor);
+ if (ret)
+ return ret;
+
+ /* read EVCR and check it */
+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
+ if (ret < 0) {
+ dev_err(nor->dev, "error %d reading EVCR\n", ret);
+ return ret;
+ }
+ if (val & EVCR_QUAD_EN_MICRON) {
+ dev_err(nor->dev, "Micron EVCR Quad bit not clear\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
{
int status;
@@ -886,6 +925,13 @@ static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
return -EINVAL;
}
return status;
+ case CFI_MFR_ST:
+ status = micron_quad_enable(nor);
+ if (status) {
+ dev_err(nor->dev, "Micron quad-read not enabled\n");
+ return -EINVAL;
+ }
+ return status;
default:
status = spansion_quad_enable(nor);
if (status) {
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 046a0a2..42e7e37 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -56,6 +56,10 @@
/* Used for Spansion flashes only. */
#define SPINOR_OP_BRWR 0x17 /* Bank register write */
+/* Used for Micron flashes only. */
+#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
+#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
+
/* Status Register bits. */
#define SR_WIP 1 /* Write in progress */
#define SR_WEL 2 /* Write enable latch */
@@ -67,6 +71,8 @@
#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */
+#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */
+
/* Flag Status Register bits */
#define FSR_READY 0x80
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists