| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAKv+Gu_TEjtGkEA0PTdt7VC_v9uqOQT3jLFRwwuXFUtodttLSA@mail.gmail.com>
Date: Fri, 7 Nov 2014 10:35:44 +0100
From: Ard Biesheuvel <ard.biesheuvel@...aro.org>
To: Yuanhan Liu <yuanhan.liu@...ux.intel.com>
Cc: LKP <lkp@...org>, Matt Fleming <matt.fleming@...el.com>,
Leif Lindholm <leif.lindholm@...aro.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [LKP] [dmi] PANIC: early exception 0e rip 10:ffffffff81899e6b
error 9 cr2 ffffffffff240000
On 7 November 2014 10:26, Yuanhan Liu <yuanhan.liu@...ux.intel.com> wrote:
> On Fri, Nov 07, 2014 at 10:03:55AM +0100, Ard Biesheuvel wrote:
>> On 7 November 2014 09:46, Yuanhan Liu <yuanhan.liu@...ux.intel.com> wrote:
>> > On Fri, Nov 07, 2014 at 09:23:56AM +0100, Ard Biesheuvel wrote:
>> >> On 7 November 2014 09:13, Yuanhan Liu <yuanhan.liu@...ux.intel.com> wrote:
>> >> > On Fri, Nov 07, 2014 at 08:44:40AM +0100, Ard Biesheuvel wrote:
>> >> >> On 7 November 2014 08:37, Yuanhan Liu <yuanhan.liu@...ux.intel.com> wrote:
>> >> >> > On Fri, Nov 07, 2014 at 08:17:36AM +0100, Ard Biesheuvel wrote:
>> >> >> >> On 7 November 2014 06:47, LKP <lkp@...org> wrote:
>> >> >> >> > FYI, we noticed the below changes on
>> >> >> >> >
>> >> >> >> > https://git.linaro.org/people/ard.biesheuvel/linux-arm efi-for-3.19
>> >> >> >> > commit aacdce6e880894acb57d71dcb2e3fc61b4ed4e96 ("dmi: add support for SMBIOS 3.0 64-bit entry point")
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > +-----------------------+------------+------------+
>> >> >> >> > | | 2fa165a26c | aacdce6e88 |
>> >> >> >> > +-----------------------+------------+------------+
>> >> >> >> > | boot_successes | 20 | 10 |
>> >> >> >> > | early-boot-hang | 1 | |
>> >> >> >> > | boot_failures | 0 | 5 |
>> >> >> >> > | PANIC:early_exception | 0 | 5 |
>> >> >> >> > +-----------------------+------------+------------+
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000036fffffff] usable
>> >> >> >> > [ 0.000000] bootconsole [earlyser0] enabled
>> >> >> >> > [ 0.000000] NX (Execute Disable) protection: active
>> >> >> >> > PANIC: early exception 0e rip 10:ffffffff81899e6b error 9 cr2 ffffffffff240000
>> >> >> >> > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc2-gc5221e6 #1
>> >> >> >> > [ 0.000000] 0000000000000000 ffffffff82203d30 ffffffff819f0a6e 00000000000003f8
>> >> >> >> > [ 0.000000] ffffffffff240000 ffffffff82203e18 ffffffff823701b0 ffffffff82511401
>> >> >> >> > [ 0.000000] 0000000000000000 0000000000000ba3 0000000000000000 ffffffffff240000
>> >> >> >> > [ 0.000000] Call Trace:
>> >> >> >> > [ 0.000000] [<ffffffff819f0a6e>] dump_stack+0x4e/0x68
>> >> >> >> > [ 0.000000] [<ffffffff823701b0>] early_idt_handler+0x90/0xb7
>> >> >> >> > [ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
>> >> >> >> > [ 0.000000] [<ffffffff81899e6b>] ? dmi_table+0x3f/0x94
>> >> >> >> > [ 0.000000] [<ffffffff81899e42>] ? dmi_table+0x16/0x94
>> >> >> >> > [ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
>> >> >> >> > [ 0.000000] [<ffffffff823c80da>] ? dmi_save_one_device+0x81/0x81
>> >> >> >> > [ 0.000000] [<ffffffff823c7eff>] dmi_walk_early+0x44/0x69
>> >> >> >> > [ 0.000000] [<ffffffff823c88a2>] dmi_present+0x180/0x1ff
>> >> >> >> > [ 0.000000] [<ffffffff823c8ab3>] dmi_scan_machine+0x144/0x191
>> >> >> >> > [ 0.000000] [<ffffffff82370702>] ? loglevel+0x31/0x31
>> >> >> >> > [ 0.000000] [<ffffffff82377f52>] setup_arch+0x490/0xc73
>> >> >> >> > [ 0.000000] [<ffffffff819eef73>] ? printk+0x4d/0x4f
>> >> >> >> > [ 0.000000] [<ffffffff82370b90>] start_kernel+0x9c/0x43f
>> >> >> >> > [ 0.000000] [<ffffffff82370120>] ? early_idt_handlers+0x120/0x120
>> >> >> >> > [ 0.000000] [<ffffffff823704a2>] x86_64_start_reservations+0x2a/0x2c
>> >> >> >> > [ 0.000000] [<ffffffff823705df>] x86_64_start_kernel+0x13b/0x14a
>> >> >> >> > [ 0.000000] RIP 0x4
>> >> >> >> >
>> >> >> >>
>> >> >> >> This is most puzzling. Could anyone decode the exception?
>> >> >> >> This looks like the non-EFI path through dmi_scan_machine(), which
>> >> >> >> calls dmi_present() /after/ calling dmi_smbios3_present(), which
>> >> >> >> apparently has not found the _SM3_ header tag. Or could the call stack
>> >> >> >> be inaccurate?
>> >> >> >>
>> >> >> >> Anyway, it would be good to know the exact type of the platform,
>> >> >> >
>> >> >> > It's a Nehalem-EP machine, wht 16 CPU and 12G memory.
>> >> >> >
>> >> >> >> and
>> >> >> >> perhaps we could find out if there is an inadvertent _SM3_ tag
>> >> >> >> somewhere in the 0xF0000 - 0xFFFFF range?
>> >> >> >
>> >> >> > Sorry, how?
>> >> >> >
>> >> >>
>> >> >> That's not a brand new machine, so I suppose there wouldn't be a
>> >> >> SMBIOS 3.0 header lurking in there.
>> >> >>
>> >> >> Anyway, if you are in a position to try things, could you apply this
>> >> >>
>> >> >> --- a/drivers/firmware/dmi_scan.c
>> >> >> +++ b/drivers/firmware/dmi_scan.c
>> >> >> @@ -617,7 +617,7 @@ void __init dmi_scan_machine(void)
>> >> >> memset(buf, 0, 16);
>> >> >> for (q = p; q < p + 0x10000; q += 16) {
>> >> >> memcpy_fromio(buf + 16, q, 16);
>> >> >> - if (!dmi_smbios3_present(buf) || !dmi_present(buf)) {
>> >> >> + if (!dmi_present(buf)) {
>> >> >> dmi_available = 1;
>> >> >> dmi_early_unmap(p, 0x10000);
>> >> >> goto out;
>> >> >>
>> >> >> and try again?
>> >> >
>> >> > kernel boots perfectly with this patch applied.
>> >> >
>> >> > --yliu
>> >> >
>> >>
>> >> Thank you! Very useful to know
>> >>
>> >
>> > Sigh, I made a silly error, I speicified wrong commit while testing your
>> > patch. Sorry for that.
>> >
>> > And I tested it again, with your former patch, sorry, the panic still
>> > happens.
>> >
>> > --yliu
>> >
>>
>> OK, no worries.
>>
>> Could you please try the attached patch? On my ARM system, it produces
>> something like this
>>
>> ====== Decoding _DMI_ header:
>> 5f 44 4d 49 5f 89 62 02 00 c0 8a fe 0c 00 27 cf
>> ====== Remapped SMBIOS table 0xfe8ac000 at ffffff800001e000, size 0x262, num 0xc
>> ====== Processing SMBIOS table entry at ffffff800001e000, type 0x0, length 0x18
>> ====== Processing SMBIOS table entry at ffffff800001e043, type 0x1, length 0x1b
>> ====== Processing SMBIOS table entry at ffffff800001e09d, type 0x2, length 0x11
>> ====== Processing SMBIOS table entry at ffffff800001e105, type 0x3, length 0x18
>> ====== Processing SMBIOS table entry at ffffff800001e155, type 0x4, length 0x2a
>> ====== Processing SMBIOS table entry at ffffff800001e19a, type 0x7, length 0x13
>> ====== Processing SMBIOS table entry at ffffff800001e1b5, type 0x9, length 0x11
>> ====== Processing SMBIOS table entry at ffffff800001e1cf, type 0x10, length 0x17
>> ====== Processing SMBIOS table entry at ffffff800001e1e8, type 0x11, length 0x28
>> ====== Processing SMBIOS table entry at ffffff800001e22e, type 0x13, length 0x1f
>> ====== Processing SMBIOS table entry at ffffff800001e24f, type 0x20, length 0xb
>> ====== Processing SMBIOS table entry at ffffff800001e25c, type 0x7f, length 0x4
>> SMBIOS 2.7 present.
>> DMI: ARM Arm Versatile Express/Arm Versatile Express, BIOS 16:20:46 Oct 28 2014
>>
>> That should help us pinpoint what is going on here.
>>
>
> Here is the output:
>
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] ====== Decoding _DMI_ header:
> [ 0.000000] 5f 44 4d 49 5f 48 a3 0b 00 20 60 8f 3e 00 25 00
> [ 0.000000] ====== Remapped SMBIOS table 0xffffffff8f602000 at ffffffffff240000, size 0xba3, num 0x3e
OK, so that looks like more type promotion silliness.
Could you apply this, and retry?
> PANIC: early exception 0e rip 10:ffffffff8167aa1a error 9 cr2 ffffffffff240001
> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc2-00008-g4d3a0be #66
> [ 0.000000] 0000000000000ba3 ffffffff81bcfd10 ffffffff818010a4 00000000000003f8
> [ 0.000000] 000000000000003e ffffffff81bcfdf8 ffffffff81d801b0 617420534f49424d
> [ 0.000000] 000000000000001f ffffffffff240000 0000000000000000 ffffffffff240000
> [ 0.000000] Call Trace:
> [ 0.000000] [<ffffffff818010a4>] dump_stack+0x46/0x58
> [ 0.000000] [<ffffffff81d801b0>] early_idt_handler+0x90/0xb7
> [ 0.000000] [<ffffffff81dd4cfc>] ? dmi_format_ids.constprop.9+0x13c/0x13c
> [ 0.000000] [<ffffffff8167aa1a>] ? dmi_table+0x4a/0xf0
> [ 0.000000] [<ffffffff817fa71b>] ? printk+0x61/0x63
> [ 0.000000] [<ffffffff81dd4cfc>] ? dmi_format_ids.constprop.9+0x13c/0x13c
> [ 0.000000] [<ffffffff81dd4cfc>] ? dmi_format_ids.constprop.9+0x13c/0x13c
> [ 0.000000] [<ffffffff81dd49dc>] dmi_walk_early+0x6b/0x90
> [ 0.000000] [<ffffffff81dd52fc>] dmi_present+0x1b4/0x23f
> [ 0.000000] [<ffffffff81dd55ab>] dmi_scan_machine+0x1d4/0x23a
> [ 0.000000] [<ffffffff81d80120>] ? early_idt_handlers+0x120/0x120
> [ 0.000000] [<ffffffff81d883a2>] setup_arch+0x462/0xcc6
> [ 0.000000] [<ffffffff81d80120>] ? early_idt_handlers+0x120/0x120
> [ 0.000000] [<ffffffff81d80167>] ? early_idt_handler+0x47/0xb7
> [ 0.000000] [<ffffffff81d80120>] ? early_idt_handlers+0x120/0x120
> [ 0.000000] [<ffffffff81d80cf0>] start_kernel+0x97/0x456
> [ 0.000000] [<ffffffff81d80120>] ? early_idt_handlers+0x120/0x120
> [ 0.000000] [<ffffffff81d80120>] ? early_idt_handlers+0x120/0x120
> [ 0.000000] [<ffffffff81d805ee>] x86_64_start_reservations+0x2a/0x2c
> [ 0.000000] [<ffffffff81d8072e>] x86_64_start_kernel+0x13e/0x14d
> [ 0.000000] RIP 0xba2
>
>
> --yliu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists