| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1415470418-10874-16-git-send-email-jiang.liu@linux.intel.com>
Date: Sun, 9 Nov 2014 02:13:15 +0800
From: Jiang Liu <jiang.liu@...ux.intel.com>
To: Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Randy Dunlap <rdunlap@...radead.org>,
Yinghai Lu <yinghai@...nel.org>,
Borislav Petkov <bp@...en8.de>, x86@...nel.org,
Joerg Roedel <joro@...tes.org>,
Jiang Liu <jiang.liu@...ux.intel.com>,
Grant Likely <grant.likely@...aro.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Tony Luck <tony.luck@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-acpi@...r.kernel.org, iommu@...ts.linux-foundation.org
Subject: [Patch Part3 v3 15/38] x86, irq: Kill x86_io_apic_ops.eoi_ioapic_pin and related interfaces
Now there is no user of x86_io_apic_ops.eoi_ioapic_pin anymore, so kill
it.
Signed-off-by: Jiang Liu <jiang.liu@...ux.intel.com>
---
arch/x86/include/asm/io_apic.h | 7 -------
arch/x86/include/asm/x86_init.h | 1 -
arch/x86/kernel/apic/io_apic.c | 20 ++++----------------
arch/x86/kernel/x86_init.c | 1 -
drivers/iommu/irq_remapping.c | 19 -------------------
5 files changed, 4 insertions(+), 44 deletions(-)
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 5fba350fec1f..3b54f0f9cbb7 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -150,10 +150,6 @@ struct irq_cfg;
extern void ioapic_insert_resources(void);
extern int arch_early_ioapic_init(void);
-extern void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg);
-
-extern void native_eoi_ioapic_pin(int apic, int pin, int vector);
-
extern int save_ioapic_entries(void);
extern void mask_ioapic_entries(void);
extern int restore_ioapic_entries(void);
@@ -237,8 +233,6 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
x86_io_apic_ops.modify(apic, reg, value);
}
-extern void io_apic_eoi(unsigned int apic, unsigned int vector);
-
extern void setup_IO_APIC(void);
extern void enable_IO_APIC(void);
extern void disable_IO_APIC(void);
@@ -282,7 +276,6 @@ static inline void disable_ioapic_support(void) { }
#define native_io_apic_write NULL
#define native_io_apic_modify NULL
#define native_disable_io_apic NULL
-#define native_eoi_ioapic_pin NULL
#endif
#endif /* _ASM_X86_IO_APIC_H */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 2637e8fb978d..fa6b1b5128ee 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -194,7 +194,6 @@ struct x86_io_apic_ops {
void (*write) (unsigned int apic, unsigned int reg, unsigned int value);
void (*modify) (unsigned int apic, unsigned int reg, unsigned int value);
void (*disable)(void);
- void (*eoi_ioapic_pin)(int apic, int pin, int vector);
};
extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 26fa504b57f6..2a10cb9f03bf 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -268,7 +268,7 @@ static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+ (mpc_ioapic_addr(idx) & ~PAGE_MASK);
}
-void io_apic_eoi(unsigned int apic, unsigned int vector)
+static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
{
struct io_apic __iomem *io_apic = io_apic_base(apic);
writel(vector, &io_apic->eoi);
@@ -524,7 +524,7 @@ static void unmask_ioapic_irq(struct irq_data *data)
* Otherwise, we simulate the EOI message manually by changing the trigger
* mode to edge and then back to level, with RTE being masked during this.
*/
-void native_eoi_ioapic_pin(int apic, int pin, int vector)
+static void __eoi_ioapic_pin(int apic, int pin, int vector)
{
if (mpc_ioapic_ver(apic) >= 0x20) {
io_apic_eoi(apic, vector);
@@ -555,19 +555,7 @@ void eoi_ioapic_pin(int vector, struct irq_cfg *cfg)
raw_spin_lock_irqsave(&ioapic_lock, flags);
for_each_irq_pin(entry, cfg->irq_2_pin)
- native_eoi_ioapic_pin(entry->apic, entry->pin, vector);
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
-{
- struct irq_pin_list *entry;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&ioapic_lock, flags);
- for_each_irq_pin(entry, cfg->irq_2_pin)
- x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin,
- cfg->vector);
+ __eoi_ioapic_pin(entry->apic, entry->pin, vector);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
@@ -603,7 +591,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
ioapic_write_entry(apic, pin, entry);
}
raw_spin_lock_irqsave(&ioapic_lock, flags);
- native_eoi_ioapic_pin(apic, pin, entry.vector);
+ __eoi_ioapic_pin(apic, pin, entry.vector);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 377b22008280..ac2b604c00ec 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -154,5 +154,4 @@ struct x86_io_apic_ops x86_io_apic_ops = {
.write = native_io_apic_write,
.modify = native_io_apic_modify,
.disable = native_disable_io_apic,
- .eoi_ioapic_pin = native_eoi_ioapic_pin,
};
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 0e2a80491170..058755b9b530 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -44,21 +44,9 @@ static void irq_remapping_disable_io_apic(void)
disconnect_bsp_APIC(0);
}
-static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
-{
- /*
- * Intr-remapping uses pin number as the virtual vector
- * in the RTE. Actual vector is programmed in
- * intr-remapping table entry. Hence for the io-apic
- * EOI we use the pin number.
- */
- io_apic_eoi(apic, pin);
-}
-
static void __init irq_remapping_modify_x86_ops(void)
{
x86_io_apic_ops.disable = irq_remapping_disable_io_apic;
- x86_io_apic_ops.eoi_ioapic_pin = eoi_ioapic_pin_remapped;
}
static __init int setup_nointremap(char *str)
@@ -194,12 +182,6 @@ void ir_ack_apic_edge(struct irq_data *data)
ack_APIC_irq();
}
-static void ir_ack_apic_level(struct irq_data *data)
-{
- ack_APIC_irq();
- eoi_ioapic_irq(data->irq, irqd_cfg(data));
-}
-
void irq_remapping_print_chip(struct irq_data *data, struct seq_file *p)
{
/*
@@ -222,7 +204,6 @@ void irq_remap_modify_chip_defaults(struct irq_chip *chip)
{
chip->irq_print_chip = ir_print_prefix;
chip->irq_ack = ir_ack_apic_edge;
- chip->irq_eoi = ir_ack_apic_level;
}
bool setup_remapped_irq(int irq, struct irq_cfg *cfg, struct irq_chip *chip)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists