| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20141109203608.GA837@gofer.mess.org>
Date: Sun, 9 Nov 2014 20:36:09 +0000
From: Sean Young <sean@...s.org>
To: Beniamino Galvani <b.galvani@...il.com>
Cc: Mauro Carvalho Chehab <m.chehab@...sung.com>,
linux-media@...r.kernel.org, Carlo Caione <carlo@...one.org>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Jerry Cao <jerry.cao@...ogic.com>,
Victor Wan <victor.wan@...ogic.com>
Subject: Re: [PATCH v2 2/3] media: rc: add driver for Amlogic Meson IR remote
receiver
On Sun, Nov 09, 2014 at 09:32:07AM +0100, Beniamino Galvani wrote:
> Amlogic Meson SoCs include a infrared remote control receiver that can
> operate in two modes: "NEC" mode in which the hardware decodes frames
> using the NEC IR protocol, and "general" mode in which the receiver
> simply reports the duration of pulses and spaces for software
> decoding.
>
> This is a driver for the IR receiver that implements software decoding
> of received frames.
>
> Signed-off-by: Beniamino Galvani <b.galvani@...il.com>
> ---
> MAINTAINERS | 1 +
> drivers/media/rc/Kconfig | 11 +++
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/meson-ir.c | 215 ++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 228 insertions(+)
> create mode 100644 drivers/media/rc/meson-ir.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0662378..f1bc045 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -850,6 +850,7 @@ ARM/Amlogic MesonX SoC support
> M: Carlo Caione <carlo@...one.org>
> L: linux-arm-kernel@...ts.infradead.org (moderated for non-subscribers)
> S: Maintained
> +F: drivers/media/rc/meson-ir.c
> N: meson[x68]
>
> ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index 1aea732..ddfab25 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -223,6 +223,17 @@ config IR_FINTEK
> To compile this driver as a module, choose M here: the
> module will be called fintek-cir.
>
> +config IR_MESON
> + tristate "Amlogic Meson IR remote receiver"
> + depends on RC_CORE
> + depends on ARCH_MESON || COMPILE_TEST
> + ---help---
> + Say Y if you want to use the IR remote receiver available
> + on Amlogic Meson SoCs.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called meson-ir.
> +
> config IR_NUVOTON
> tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
> depends on PNP
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index 8f509e0..379a5c0 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_IR_IMON) += imon.o
> obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
> obj-$(CONFIG_IR_MCEUSB) += mceusb.o
> obj-$(CONFIG_IR_FINTEK) += fintek-cir.o
> +obj-$(CONFIG_IR_MESON) += meson-ir.o
> obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
> obj-$(CONFIG_IR_ENE) += ene_ir.o
> obj-$(CONFIG_IR_REDRAT3) += redrat3.o
> diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
> new file mode 100644
> index 0000000..4d6aed1
> --- /dev/null
> +++ b/drivers/media/rc/meson-ir.c
> @@ -0,0 +1,215 @@
> +/*
> + * Driver for Amlogic Meson IR remote receiver
> + *
> + * Copyright (C) 2014 Beniamino Galvani <b.galvani@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +
> +#include <media/rc-core.h>
> +
> +#define DRIVER_NAME "meson-ir"
> +
> +#define IR_DEC_LDR_ACTIVE 0x00
> +#define IR_DEC_LDR_IDLE 0x04
> +#define IR_DEC_LDR_REPEAT 0x08
> +#define IR_DEC_BIT_0 0x0c
> +#define IR_DEC_REG0 0x10
> +#define IR_DEC_FRAME 0x14
> +#define IR_DEC_STATUS 0x18
> +#define IR_DEC_REG1 0x1c
> +
> +#define REG0_RATE_MASK (BIT(11) - 1)
> +
> +#define REG1_MODE_MASK (BIT(7) | BIT(8))
> +#define REG1_MODE_NEC (0 << 7)
> +#define REG1_MODE_GENERAL (2 << 7)
> +
> +#define REG1_TIME_IV_SHIFT 16
> +#define REG1_TIME_IV_MASK ((BIT(13) - 1) << REG1_TIME_IV_SHIFT)
> +
> +#define REG1_IRQSEL_MASK (BIT(2) | BIT(3))
> +#define REG1_IRQSEL_NEC_MODE (0 << 2)
> +#define REG1_IRQSEL_RISE_FALL (1 << 2)
> +#define REG1_IRQSEL_FALL (2 << 2)
> +#define REG1_IRQSEL_RISE (3 << 2)
> +
> +#define REG1_RESET BIT(0)
> +#define REG1_ENABLE BIT(15)
> +
> +#define STATUS_IR_DEC_IN BIT(8)
> +
> +#define MESON_TRATE 10 /* us */
> +
> +struct meson_ir {
> + void __iomem *reg;
> + struct rc_dev *rc;
> + int irq;
> + spinlock_t lock;
> +};
> +
> +static void meson_ir_set_mask(struct meson_ir *ir, unsigned int reg,
> + u32 mask, u32 value)
> +{
> + u32 data;
> +
> + data = readl(ir->reg + reg);
> + data &= ~mask;
> + data |= (value & mask);
> + writel(data, ir->reg + reg);
> +}
> +
> +static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
> +{
> + struct meson_ir *ir = dev_id;
> + u32 duration;
> + DEFINE_IR_RAW_EVENT(rawir);
> +
> + spin_lock(&ir->lock);
> +
> + duration = readl(ir->reg + IR_DEC_REG1);
> + duration = (duration & REG1_TIME_IV_MASK) >> REG1_TIME_IV_SHIFT;
> + rawir.duration = US_TO_NS(duration * MESON_TRATE);
> +
> + rawir.pulse = !!(readl(ir->reg + IR_DEC_STATUS) & STATUS_IR_DEC_IN);
> +
> + ir_raw_event_store_with_filter(ir->rc, &rawir);
> + ir_raw_event_handle(ir->rc);
> +
> + spin_unlock(&ir->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int meson_ir_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct resource *res;
> + const char *map_name;
> + struct meson_ir *ir;
> + int ret;
> +
> + ir = devm_kzalloc(dev, sizeof(struct meson_ir), GFP_KERNEL);
> + if (!ir)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + ir->reg = devm_ioremap_resource(dev, res);
> + if (IS_ERR(ir->reg)) {
> + dev_err(dev, "failed to map registers\n");
> + return PTR_ERR(ir->reg);
> + }
> +
> + ir->irq = platform_get_irq(pdev, 0);
> + if (ir->irq < 0) {
> + dev_err(dev, "no irq resource\n");
> + return ir->irq;
> + }
> +
> + ir->rc = rc_allocate_device();
> + if (!ir->rc) {
> + dev_err(dev, "failed to allocate rc device\n");
> + return -ENOMEM;
> + }
> +
> + ir->rc->priv = ir;
> + ir->rc->input_name = DRIVER_NAME;
> + ir->rc->input_phys = DRIVER_NAME "/input0";
> + ir->rc->input_id.bustype = BUS_HOST;
> + map_name = of_get_property(node, "linux,rc-map-name", NULL);
> + ir->rc->map_name = map_name ? map_name : RC_MAP_EMPTY;
> + ir->rc->dev.parent = dev;
> + ir->rc->driver_type = RC_DRIVER_IR_RAW;
> + ir->rc->allowed_protocols = RC_BIT_ALL;
> + ir->rc->rx_resolution = US_TO_NS(MESON_TRATE);
> + ir->rc->timeout = MS_TO_NS(200);
> + ir->rc->driver_name = DRIVER_NAME;
> +
> + spin_lock_init(&ir->lock);
> + platform_set_drvdata(pdev, ir);
> +
> + ret = rc_register_device(ir->rc);
> + if (ret) {
> + dev_err(dev, "failed to register rc device\n");
> + goto out_free;
> + }
> +
> + ret = devm_request_irq(dev, ir->irq, meson_ir_irq, 0, "ir-meson", ir);
> + if (ret) {
> + dev_err(dev, "failed to request irq\n");
> + goto out_unreg;
> + }
> +
> + /* Reset the decoder */
> + meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, REG1_RESET);
> + meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, 0);
> + /* Set general operation mode */
> + meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK, REG1_MODE_GENERAL);
> + /* Set rate */
> + meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, MESON_TRATE - 1);
> + /* IRQ on rising and falling edges */
> + meson_ir_set_mask(ir, IR_DEC_REG1, REG1_IRQSEL_MASK,
> + REG1_IRQSEL_RISE_FALL);
> + /* Enable the decoder */
> + meson_ir_set_mask(ir, IR_DEC_REG1, REG1_ENABLE, REG1_ENABLE);
> +
> + dev_info(dev, "receiver initialized\n");
> +
> + return 0;
> +out_unreg:
> + rc_unregister_device(ir->rc);
rc_unregister_device() already calls rc_free_device().
> +out_free:
> + rc_free_device(ir->rc);
> +
> + return ret;
> +}
> +
> +static int meson_ir_remove(struct platform_device *pdev)
> +{
> + struct meson_ir *ir = platform_get_drvdata(pdev);
> + unsigned long flags;
> +
> + /* Disable the decoder */
> + spin_lock_irqsave(&ir->lock, flags);
> + meson_ir_set_mask(ir, IR_DEC_REG1, REG1_ENABLE, 0);
> + spin_unlock_irqrestore(&ir->lock, flags);
> +
> + rc_unregister_device(ir->rc);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id meson_ir_match[] = {
> + { .compatible = "amlogic,meson6-ir" },
> + { },
> +};
> +
> +static struct platform_driver meson_ir_driver = {
> + .probe = meson_ir_probe,
> + .remove = meson_ir_remove,
> + .driver = {
> + .name = DRIVER_NAME,
> + .of_match_table = meson_ir_match,
> + },
> +};
> +
> +module_platform_driver(meson_ir_driver);
> +
> +MODULE_DESCRIPTION("Amlogic Meson IR remote receiver driver");
> +MODULE_AUTHOR("Beniamino Galvani <b.galvani@...il.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists