lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 10 Nov 2014 19:55:05 +0100
From:	Roman Byshko <>
Cc:	Kishon Vijay Abraham I <>,
	Maxime Ripard <>,
	Russell King <>,
	Kumar Gala <>,
	Ian Campbell <>,
	Mark Rutland <>,
	Pawel Moll <>,
	Rob Herring <>
Subject: [PATCH v2 0/5] ARM: sunxi: Add support for USB OTG PHY


There is already support for two USB phys, which are used for
USB host controllers on Allwinner SoC aka sunxi.

This patch series add support for the USB OTG phy (aka phy0).

The code has been tested on Allwinner A20 aka sun7i (Cubietruck).

Best regards,
Roman Byshko

Changes since v1:
	* Improved comment about 45 Ohm resistor calibration
	* Added Signed-off-by to all patches

Roman Byshko (5):
  phy: sun4i: add support for USB phy0
  ARM: dtsi: sunxi: add common VBUS regulator
  ARM: sun7i: dtsi: add support for usbphy0
  ARM: dts: sun7i: Cubietruck: override regulator pin
  ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG

 arch/arm/boot/dts/sun7i-a20-cubietruck.dts     | 14 ++++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi               |  4 ++--
 arch/arm/boot/dts/sunxi-common-regulators.dtsi | 19 +++++++++++++++++++
 drivers/phy/phy-sun4i-usb.c                    |  9 ++++++---
 4 files changed, 41 insertions(+), 5 deletions(-)


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

Powered by blists - more mailing lists