[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1415754489-9097-4-git-send-email-marius.gorski@gmail.com>
Date: Wed, 12 Nov 2014 02:08:08 +0100
From: Mariusz Gorski <marius.gorski@...il.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Willy Tarreau <willy@...a-x.org>
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH 3/4] staging: panel: Reorder module parameter declarations
Change the order of the module parameter declarations
so that it matches the Kconfig order.
Signed-off-by: Mariusz Gorski <marius.gorski@...il.com>
---
drivers/staging/panel/panel.c | 73 ++++++++++++++++++++++---------------------
1 file changed, 38 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 4434c1d..05b0d1e 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -433,6 +433,22 @@ static int parport = -1;
module_param(parport, int, 0000);
MODULE_PARM_DESC(parport, "Parallel port index (0=lpt1, 1=lpt2, ...)");
+static int profile = DEFAULT_PROFILE;
+module_param(profile, int, 0000);
+MODULE_PARM_DESC(profile,
+ "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; "
+ "4=16x2 nexcom; default=40x2, old kp");
+
+static int keypad_type = -1;
+module_param(keypad_type, int, 0000);
+MODULE_PARM_DESC(keypad_type,
+ "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");
+
+static int lcd_type = -1;
+module_param(lcd_type, int, 0000);
+MODULE_PARM_DESC(lcd_type,
+ "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in");
+
static int lcd_height = -1;
module_param(lcd_height, int, 0000);
MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD");
@@ -449,39 +465,15 @@ static int lcd_hwidth = -1; /* hardware buffer width (usually 64) */
module_param(lcd_hwidth, int, 0000);
MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)");
-static int lcd_enabled = -1;
-module_param(lcd_enabled, int, 0000);
-MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead");
-
-static int keypad_enabled = -1;
-module_param(keypad_enabled, int, 0000);
-MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");
-
-static int lcd_type = -1;
-module_param(lcd_type, int, 0000);
-MODULE_PARM_DESC(lcd_type,
- "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in");
+static int lcd_charset = -1;
+module_param(lcd_charset, int, 0000);
+MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074");
static int lcd_proto = -1;
module_param(lcd_proto, int, 0000);
MODULE_PARM_DESC(lcd_proto,
"LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface");
-static int lcd_charset = -1;
-module_param(lcd_charset, int, 0000);
-MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074");
-
-static int keypad_type = -1;
-module_param(keypad_type, int, 0000);
-MODULE_PARM_DESC(keypad_type,
- "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");
-
-static int profile = DEFAULT_PROFILE;
-module_param(profile, int, 0000);
-MODULE_PARM_DESC(profile,
- "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; "
- "4=16x2 nexcom; default=40x2, old kp");
-
/*
* These are the parallel port pins the LCD control signals are connected to.
* Set this to 0 if the signal is not used. Set it to its opposite value
@@ -506,20 +498,31 @@ module_param(lcd_rw_pin, int, 0000);
MODULE_PARM_DESC(lcd_rw_pin,
"# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)");
-static int lcd_bl_pin = PIN_NOT_SET;
-module_param(lcd_bl_pin, int, 0000);
-MODULE_PARM_DESC(lcd_bl_pin,
- "# of the // port pin connected to LCD backlight, with polarity (-17..17)");
+static int lcd_cl_pin = PIN_NOT_SET;
+module_param(lcd_cl_pin, int, 0000);
+MODULE_PARM_DESC(lcd_cl_pin,
+ "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");
static int lcd_da_pin = PIN_NOT_SET;
module_param(lcd_da_pin, int, 0000);
MODULE_PARM_DESC(lcd_da_pin,
"# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)");
-static int lcd_cl_pin = PIN_NOT_SET;
-module_param(lcd_cl_pin, int, 0000);
-MODULE_PARM_DESC(lcd_cl_pin,
- "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");
+static int lcd_bl_pin = PIN_NOT_SET;
+module_param(lcd_bl_pin, int, 0000);
+MODULE_PARM_DESC(lcd_bl_pin,
+ "# of the // port pin connected to LCD backlight, with polarity (-17..17)");
+
+/* Deprecated module parameters - consider not using them anymore */
+
+static int lcd_enabled = -1;
+module_param(lcd_enabled, int, 0000);
+MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead");
+
+static int keypad_enabled = -1;
+module_param(keypad_enabled, int, 0000);
+MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");
+
static const unsigned char *lcd_char_conv;
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists