[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <1415965837-29331-3-git-send-email-mikko.perttunen@kapsi.fi>
Date: Fri, 14 Nov 2014 13:50:36 +0200
From: Mikko Perttunen <mikko.perttunen@...si.fi>
To: swarren@...dotorg.org, thierry.reding@...il.com, gnurou@...il.com
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-tegra@...r.kernel.org, wni@...dia.com,
Mikko Perttunen <mperttunen@...dia.com>
Subject: [PATCH v5 2/3] ARM: tegra: Add PMC thermtrip programming to Jetson TK1 device tree
From: Mikko Perttunen <mperttunen@...dia.com>
This adds the required information to reset the board during an overheating
situation to the Jetson TK1 device tree. The thermal reset is handled by the
PMC by sending an I2C message to the PMIC. The entries specify the I2C
message to be sent.
Signed-off-by: Mikko Perttunen <mperttunen@...dia.com>
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index f46a789..be36bb4 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1672,6 +1672,13 @@
nvidia,core-pwr-off-time = <61036>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
+
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x40>;
+ nvidia,reg-addr = <0x36>;
+ nvidia,reg-data = <0x2>;
+ };
};
/* Serial ATA */
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists