linux-kernel - [PATCH 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1415989800-7515-2-git-send-email-sbranden@broadcom.com>
Date:	Fri, 14 Nov 2014 10:29:57 -0800
From:	Scott Branden <sbranden@...adcom.com>
To:	Scott Branden <sbranden@...adcom.com>,
	Thierry Reding <thierry.reding@...il.com>
CC:	Ray Jui <rjui@...adcom.com>,
	Arun Ramamurthy <arunrama@...adcom.com>,
	<bcm-kernel-feedback-list@...adcom.com>,
	<linux-pwm@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels

From: Arun Ramamurthy <arunrama@...adcom.com>

The probe routine unnecessarily sets the smooth type and polarity for
all channels. This causes the channel for the speaker to click at the same
time the backlight turns on. The smooth type and polarity should be set individually
for each channel as required and no defaults need to be set.

Signed-off-by: Arun Ramamurthy <arunrama@...adcom.com>
Reviewed-by: Ray Jui <rjui@...adcom.com>
Signed-off-by: Scott Branden <sbranden@...adcom.com>
---
 drivers/pwm/pwm-bcm-kona.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c
index 02bc048..29eef9e 100644
--- a/drivers/pwm/pwm-bcm-kona.c
+++ b/drivers/pwm/pwm-bcm-kona.c
@@ -266,12 +266,9 @@ static int kona_pwmc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/* Set smooth mode, push/pull, and normal polarity for all channels */
-	for (chan = 0; chan < kp->chip.npwm; chan++) {
-		value |= (1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
+	/* Set push/pull for all channels */
+	for (chan = 0; chan < kp->chip.npwm; chan++)
 		value |= (1 << PWM_CONTROL_TYPE_SHIFT(chan));
-		value |= (1 << PWM_CONTROL_POLARITY_SHIFT(chan));
-	}
 
 	writel(value, kp->base + PWM_CONTROL_OFFSET);
 
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/