[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1416235750-4766-6-git-send-email-daniel.thompson@linaro.org>
Date: Mon, 17 Nov 2014 14:49:06 +0000
From: Daniel Thompson <daniel.thompson@...aro.org>
To: Russell King <linux@....linux.org.uk>,
Arnd Bergmann <arnd@...db.de>
Cc: Daniel Thompson <daniel.thompson@...aro.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
spear-devel@...t.st.com, Paul Bolle <pebolle@...cali.nl>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
John Stultz <john.stultz@...aro.org>,
Sumit Semwal <sumit.semwal@...aro.org>, patches@...aro.org,
linaro-kernel@...ts.linaro.org, Tony Lindgren <tony@...mide.com>,
Arnd Bergmann <arnd.bergmann@...aro.org>,
linux-omap@...r.kernel.org
Subject: [PATCH v13 5/9] arm: omap1: Migrate debug_ll macros to use 8250.S
The omap1's debug-macro.S is similar to the generic 8250 code. Compared to
the 8520 code the omap1 macro automatically determines what UART to use
based on breadcrumbs left by the bootloader and automatically copes with
the eccentric register layout on OMAP7XX.
This patch drops both these features and relies instead on the generic
8250 macros:
1. Dropping support for the bootloader breadcrumbs is identical to the
way the migration was handled for OMAP2 (see 808b7e07464d...).
2. Support for OMAP7XX still exists but it must be configured by hand
(DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime.
Signed-off-by: Daniel Thompson <daniel.thompson@...aro.org>
Cc: Russell King <linux@....linux.org.uk>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: Tony Lindgren <tony@...mide.com>
Cc: Arnd Bergmann <arnd.bergmann@...aro.org>
Cc: linux-omap@...r.kernel.org
Tested-by: Aaro Koskinen <aaro.koskinen@....fi>
---
arch/arm/Kconfig.debug | 57 +++++++++++++-
arch/arm/mach-omap1/include/mach/debug-macro.S | 101 -------------------------
2 files changed, 56 insertions(+), 102 deletions(-)
delete mode 100644 arch/arm/mach-omap1/include/mach/debug-macro.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 6dc39e69fe12..80e8ac50551e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -495,6 +495,30 @@ choice
Say Y here if you want kernel low-level debugging support
on TI-NSPIRE CX models.
+ config DEBUG_OMAP1UART1
+ bool "Kernel low-level debugging via OMAP1 UART1"
+ depends on ARCH_OMAP1
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP1 based platforms (except OMAP730) on the UART1.
+
+ config DEBUG_OMAP1UART2
+ bool "Kernel low-level debugging via OMAP1 UART2"
+ depends on ARCH_OMAP1
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP1 based platforms (except OMAP730) on the UART2.
+
+ config DEBUG_OMAP1UART3
+ bool "Kernel low-level debugging via OMAP1 UART3"
+ depends on ARCH_OMAP1
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP1 based platforms (except OMAP730) on the UART3.
+
config DEBUG_OMAP2UART1
bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
depends on ARCH_OMAP2PLUS
@@ -537,6 +561,30 @@ choice
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
+ config DEBUG_OMAP7XXUART1
+ bool "Kernel low-level debugging via OMAP730 UART1"
+ depends on ARCH_OMAP730
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP730 based platforms on the UART1.
+
+ config DEBUG_OMAP7XXUART2
+ bool "Kernel low-level debugging via OMAP730 UART2"
+ depends on ARCH_OMAP730
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP730 based platforms on the UART2.
+
+ config DEBUG_OMAP7XXUART3
+ bool "Kernel low-level debugging via OMAP730 UART3"
+ depends on ARCH_OMAP730
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP730 based platforms on the UART3.
+
config DEBUG_TI81XXUART1
bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
depends on ARCH_OMAP2PLUS
@@ -1163,6 +1211,9 @@ config DEBUG_UART_PHYS
default 0xffc02000 if DEBUG_SOCFPGA_UART
default 0xffd82340 if ARCH_IOP13XX
default 0xfff36000 if DEBUG_HIGHBANK_UART
+ default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
+ default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
+ default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
default 0xfffe8600 if DEBUG_UART_BCM63XX
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1236,6 +1287,9 @@ config DEBUG_UART_VIRT
default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
default 0xfef36000 if DEBUG_HIGHBANK_UART
+ default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
+ default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
+ default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
default 0xfefff700 if ARCH_IOP33X
default 0xff003000 if DEBUG_U300_UART
default DEBUG_UART_PHYS if !MMU
@@ -1247,7 +1301,8 @@ config DEBUG_UART_VIRT
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default 0 if FOOTBRIDGE || ARCH_IOP32X
+ default 0 if FOOTBRIDGE || ARCH_IOP32X || \
+ DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
default 2
config DEBUG_UART_8250_WORD
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
deleted file mode 100644
index 5c1a26c9f490..000000000000
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* arch/arm/mach-omap1/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/serial_reg.h>
-
-#include "serial.h"
-
- .pushsection .data
-omap_uart_phys: .word 0x0
-omap_uart_virt: .word 0x0
- .popsection
-
- /*
- * Note that this code won't work if the bootloader passes
- * a wrong machine ID number in r1. To debug, just hardcode
- * the desired UART phys and virt addresses temporarily into
- * the omap_uart_phys and omap_uart_virt above.
- */
- .macro addruart, rp, rv, tmp
-
- /* Use omap_uart_phys/virt if already configured */
-9: adr \rp, 99f @ get effective addr of 99f
- ldr \rv, [\rp] @ get absolute addr of 99f
- sub \rv, \rv, \rp @ offset between the two
- ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
- sub \tmp, \rp, \rv @ make it effective
- ldr \rp, [\tmp, #0] @ omap_uart_phys
- ldr \rv, [\tmp, #4] @ omap_uart_virt
- cmp \rp, #0 @ is port configured?
- cmpne \rv, #0
- bne 100f @ already configured
-
- /* Check the debug UART configuration set in uncompress.h */
- and \rp, pc, #0xff000000
- ldr \rv, =OMAP_UART_INFO_OFS
- ldr \rp, [\rp, \rv]
-
- /* Select the UART to use based on the UART1 scratchpad value */
-10: cmp \rp, #0 @ no port configured?
- beq 11f @ if none, try to use UART1
- cmp \rp, #OMAP1UART1
- beq 11f @ configure OMAP1UART1
- cmp \rp, #OMAP1UART2
- beq 12f @ configure OMAP1UART2
- cmp \rp, #OMAP1UART3
- beq 13f @ configure OMAP2UART3
-
- /* Configure the UART offset from the phys/virt base */
-11: mov \rp, #0x00fb0000 @ OMAP1UART1
- b 98f
-12: mov \rp, #0x00fb0000 @ OMAP1UART1
- orr \rp, \rp, #0x00000800 @ OMAP1UART2
- b 98f
-13: mov \rp, #0x00fb0000 @ OMAP1UART1
- orr \rp, \rp, #0x00000800 @ OMAP1UART2
- orr \rp, \rp, #0x00009000 @ OMAP1UART3
-
- /* Store both phys and virt address for the uart */
-98: add \rp, \rp, #0xff000000 @ phys base
- str \rp, [\tmp, #0] @ omap_uart_phys
- sub \rp, \rp, #0xff000000 @ phys base
- add \rp, \rp, #0xfe000000 @ virt base
- str \rp, [\tmp, #4] @ omap_uart_virt
- b 9b
-
- .align
-99: .word .
- .word omap_uart_phys
- .ltorg
-
-100:
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro busyuart,rd,rx
-1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
- and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
- teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
- beq 1002f
- ldrb \rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
- and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
- teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
- bne 1001b
-1002:
- .endm
-
- .macro waituart,rd,rx
- .endm
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists