| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1416242884-5261-9-git-send-email-peter.griffin@linaro.org>
Date: Mon, 17 Nov 2014 16:48:01 +0000
From: Peter Griffin <peter.griffin@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
maxime.coquelin@...com, srinivas.kandagatla@...il.com,
patrice.chotard@...com, arnd@...db.de
Cc: peter.griffin@...aro.org, lee.jones@...aro.org,
devicetree@...r.kernel.org
Subject: [PATCH v3 08/11] ARM: STi: DT: STih407: Abstract common dt nodes into shared files.
The stih410 soc which will be added in the following commit is very similar to
the stih407, to enable maximum re-use of the dt files this commit abstracts the
common parts into a shared dt file stihxxx-b2120 for the board, and also a shared
file stih407-family.dtsi for the SoC.
Signed-off-by: Peter Griffin <peter.griffin@...aro.org>
---
arch/arm/boot/dts/stih407-b2120.dts | 53 +------
arch/arm/boot/dts/stih407-family.dtsi | 278 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/stih407.dtsi | 279 ----------------------------------
arch/arm/boot/dts/stihxxx-b2120.dtsi | 59 +++++++
4 files changed, 340 insertions(+), 329 deletions(-)
create mode 100644 arch/arm/boot/dts/stih407-family.dtsi
delete mode 100644 arch/arm/boot/dts/stih407.dtsi
create mode 100644 arch/arm/boot/dts/stihxxx-b2120.dtsi
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
index fe69f92..a3ad52b 100644
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -7,7 +7,9 @@
* published by the Free Software Foundation.
*/
/dts-v1/;
-#include "stih407.dtsi"
+#include "stih407-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stihxxx-b2120.dtsi"
/ {
model = "STiH407 B2120";
compatible = "st,stih407-b2120", "st,stih407";
@@ -26,53 +28,4 @@
ttyAS0 = &sbc_serial0;
};
- soc {
- sbc_serial0: serial@...0000 {
- status = "okay";
- };
-
- leds {
- compatible = "gpio-leds";
- red {
- #gpio-cells = <2>;
- label = "Front Panel LED";
- gpios = <&pio4 1 0>;
- linux,default-trigger = "heartbeat";
- };
- green {
- #gpio-cells = <2>;
- gpios = <&pio1 3 0>;
- default-state = "off";
- };
- };
-
- i2c@...2000 {
- status = "okay";
- };
-
- i2c@...3000 {
- status = "okay";
- };
-
- i2c@...4000 {
- status = "okay";
- };
-
- i2c@...5000 {
- status = "okay";
- };
-
- i2c@...0000 {
- status = "okay";
- };
-
- /* SSC11 to HDMI */
- i2c@...1000 {
- status = "okay";
- /* HDMI V1.3a supports Standard mode only */
- clock-frequency = <100000>;
- st,i2c-min-scl-pulse-width-us = <0>;
- st,i2c-min-sda-pulse-width-us = <5>;
- };
- };
};
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
new file mode 100644
index 0000000..3e31d32
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/reset-controller/stih407-resets.h>
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ intc: interrupt-controller@...61000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+ };
+
+ scu@...60000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x08760000 0x1000>;
+ };
+
+ timer@...60200 {
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x08760200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&arm_periph_clk>;
+ };
+
+ l2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0x08762000 0x1000>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ compatible = "simple-bus";
+
+ powerdown: powerdown-controller {
+ compatible = "st,stih407-powerdown";
+ #reset-cells = <1>;
+ };
+
+ softreset: softreset-controller {
+ compatible = "st,stih407-softreset";
+ #reset-cells = <1>;
+ };
+
+ picophyreset: picophyreset-controller {
+ compatible = "st,stih407-picophyreset";
+ #reset-cells = <1>;
+ };
+
+ syscfg_sbc: sbc-syscfg@...0000 {
+ compatible = "st,stih407-sbc-syscfg", "syscon";
+ reg = <0x9620000 0x1000>;
+ };
+
+ syscfg_front: front-syscfg@...0000 {
+ compatible = "st,stih407-front-syscfg", "syscon";
+ reg = <0x9280000 0x1000>;
+ };
+
+ syscfg_rear: rear-syscfg@...0000 {
+ compatible = "st,stih407-rear-syscfg", "syscon";
+ reg = <0x9290000 0x1000>;
+ };
+
+ syscfg_flash: flash-syscfg@...0000 {
+ compatible = "st,stih407-flash-syscfg", "syscon";
+ reg = <0x92a0000 0x1000>;
+ };
+
+ syscfg_sbc_reg: fvdp-lite-syscfg@...0000 {
+ compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+ reg = <0x9600000 0x1000>;
+ };
+
+ syscfg_core: core-syscfg@...0000 {
+ compatible = "st,stih407-core-syscfg", "syscon";
+ reg = <0x92b0000 0x1000>;
+ };
+
+ syscfg_lpm: lpm-syscfg@...5100 {
+ compatible = "st,stih407-lpm-syscfg", "syscon";
+ reg = <0x94b5100 0x1000>;
+ };
+
+ serial@...0000 {
+ compatible = "st,asc";
+ reg = <0x9830000 0x2c>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial0>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
+ };
+
+ serial@...1000 {
+ compatible = "st,asc";
+ reg = <0x9831000 0x2c>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial1>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
+ };
+
+ serial@...2000 {
+ compatible = "st,asc";
+ reg = <0x9832000 0x2c>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial2>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
+ };
+
+ /* SBC_ASC0 - UART10 */
+ sbc_serial0: serial@...0000 {
+ compatible = "st,asc";
+ reg = <0x9530000 0x2c>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial0>;
+ clocks = <&clk_sysin>;
+
+ status = "disabled";
+ };
+
+ serial@...1000 {
+ compatible = "st,asc";
+ reg = <0x9531000 0x2c>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial1>;
+ clocks = <&clk_sysin>;
+
+ status = "disabled";
+ };
+
+ i2c@...0000 {
+ compatible = "st,comms-ssc4-i2c";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x9840000 0x110>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+
+ status = "disabled";
+ };
+
+ i2c@...1000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+
+ status = "disabled";
+ };
+
+ i2c@...2000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_default>;
+
+ status = "disabled";
+ };
+
+ i2c@...3000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
+
+ status = "disabled";
+ };
+
+ i2c@...4000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
+
+ status = "disabled";
+ };
+
+ i2c@...5000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9845000 0x110>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+
+ status = "disabled";
+ };
+
+
+ /* SSCs on SBC */
+ i2c@...0000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+
+ status = "disabled";
+ };
+
+ i2c@...1000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
deleted file mode 100644
index 50637f5..0000000
--- a/arch/arm/boot/dts/stih407.dtsi
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih407-clock.dtsi"
-#include "stih407-pinctrl.dtsi"
-#include <dt-bindings/reset-controller/stih407-resets.h>
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- };
- };
-
- intc: interrupt-controller@...61000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x08761000 0x1000>, <0x08760100 0x100>;
- };
-
- scu@...60000 {
- compatible = "arm,cortex-a9-scu";
- reg = <0x08760000 0x1000>;
- };
-
- timer@...60200 {
- interrupt-parent = <&intc>;
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x08760200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&arm_periph_clk>;
- };
-
- l2: cache-controller {
- compatible = "arm,pl310-cache";
- reg = <0x08762000 0x1000>;
- arm,data-latency = <3 3 3>;
- arm,tag-latency = <2 2 2>;
- cache-unified;
- cache-level = <2>;
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
- ranges;
- compatible = "simple-bus";
-
- powerdown: powerdown-controller {
- compatible = "st,stih407-powerdown";
- #reset-cells = <1>;
- };
-
- softreset: softreset-controller {
- compatible = "st,stih407-softreset";
- #reset-cells = <1>;
- };
-
- picophyreset: picophyreset-controller {
- compatible = "st,stih407-picophyreset";
- #reset-cells = <1>;
- };
-
- syscfg_sbc: sbc-syscfg@...0000 {
- compatible = "st,stih407-sbc-syscfg", "syscon";
- reg = <0x9620000 0x1000>;
- };
-
- syscfg_front: front-syscfg@...0000 {
- compatible = "st,stih407-front-syscfg", "syscon";
- reg = <0x9280000 0x1000>;
- };
-
- syscfg_rear: rear-syscfg@...0000 {
- compatible = "st,stih407-rear-syscfg", "syscon";
- reg = <0x9290000 0x1000>;
- };
-
- syscfg_flash: flash-syscfg@...0000 {
- compatible = "st,stih407-flash-syscfg", "syscon";
- reg = <0x92a0000 0x1000>;
- };
-
- syscfg_sbc_reg: fvdp-lite-syscfg@...0000 {
- compatible = "st,stih407-sbc-reg-syscfg", "syscon";
- reg = <0x9600000 0x1000>;
- };
-
- syscfg_core: core-syscfg@...0000 {
- compatible = "st,stih407-core-syscfg", "syscon";
- reg = <0x92b0000 0x1000>;
- };
-
- syscfg_lpm: lpm-syscfg@...5100 {
- compatible = "st,stih407-lpm-syscfg", "syscon";
- reg = <0x94b5100 0x1000>;
- };
-
- serial@...0000 {
- compatible = "st,asc";
- reg = <0x9830000 0x2c>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial0>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
-
- status = "disabled";
- };
-
- serial@...1000 {
- compatible = "st,asc";
- reg = <0x9831000 0x2c>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial1>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
-
- status = "disabled";
- };
-
- serial@...2000 {
- compatible = "st,asc";
- reg = <0x9832000 0x2c>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial2>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
-
- status = "disabled";
- };
-
- /* SBC_ASC0 - UART10 */
- sbc_serial0: serial@...0000 {
- compatible = "st,asc";
- reg = <0x9530000 0x2c>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sbc_serial0>;
- clocks = <&clk_sysin>;
-
- status = "disabled";
- };
-
- serial@...1000 {
- compatible = "st,asc";
- reg = <0x9531000 0x2c>;
- interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sbc_serial1>;
- clocks = <&clk_sysin>;
-
- status = "disabled";
- };
-
- i2c@...0000 {
- compatible = "st,comms-ssc4-i2c";
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x9840000 0x110>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0_default>;
-
- status = "disabled";
- };
-
- i2c@...1000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9841000 0x110>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_default>;
-
- status = "disabled";
- };
-
- i2c@...2000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9842000 0x110>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_default>;
-
- status = "disabled";
- };
-
- i2c@...3000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9843000 0x110>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_default>;
-
- status = "disabled";
- };
-
- i2c@...4000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9844000 0x110>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c4_default>;
-
- status = "disabled";
- };
-
- i2c@...5000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9845000 0x110>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c5_default>;
-
- status = "disabled";
- };
-
-
- /* SSCs on SBC */
- i2c@...0000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9540000 0x110>;
- interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_sysin>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c10_default>;
-
- status = "disabled";
- };
-
- i2c@...1000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9541000 0x110>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_sysin>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c11_default>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
new file mode 100644
index 0000000..0074bd4
--- /dev/null
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+ soc {
+ sbc_serial0: serial@...0000 {
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ red {
+ #gpio-cells = <2>;
+ label = "Front Panel LED";
+ gpios = <&pio4 1 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ #gpio-cells = <2>;
+ gpios = <&pio1 3 0>;
+ default-state = "off";
+ };
+ };
+
+ i2c@...2000 {
+ status = "okay";
+ };
+
+ i2c@...3000 {
+ status = "okay";
+ };
+
+ i2c@...4000 {
+ status = "okay";
+ };
+
+ i2c@...5000 {
+ status = "okay";
+ };
+
+ i2c@...0000 {
+ status = "okay";
+ };
+
+ /* SSC11 to HDMI */
+ i2c@...1000 {
+ status = "okay";
+ /* HDMI V1.3a supports Standard mode only */
+ clock-frequency = <100000>;
+ st,i2c-min-scl-pulse-width-us = <0>;
+ st,i2c-min-sda-pulse-width-us = <5>;
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists