[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <A2CA0424C0A6F04399FB9E1CD98E0304844EDA05@US01WEMBX2.internal.synopsys.com>
Date: Tue, 18 Nov 2014 21:45:13 +0000
From: Paul Zimmerman <Paul.Zimmerman@...opsys.com>
To: "balbi@...com" <balbi@...com>,
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>
CC: Greg KH <gregkh@...uxfoundation.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>
Subject: RE: [PATCH] usb: gadget: USB3 support to the legacy printer driver
> From: linux-usb-owner@...r.kernel.org [mailto:linux-usb-owner@...r.kernel.org] On Behalf Of Felipe Balbi
> Sent: Tuesday, November 18, 2014 12:47 PM
>
> On Tue, Nov 18, 2014 at 03:41:43PM -0500, Jorge Ramirez-Ortiz wrote:
> >
> > notice that the original PLX driver was still far from the theoretical 5Gbps
> > target (I was expecting to measure at least 3Gbps and could only get 1Gbps).
> > So 1Gbps should be the target to meet on the kernel.org net2280 - do you agree?
>
> this depends on a whole bunch of things. Mainline is a lot different
> from PLX's kernel tree, I'm sure.
>
> It also depends on how many PCIe lanes you're using. Just because USB3
> guarantees 5Gbps bandwidth, if you use a 1x PCIe connector, you'll never
> get that ;-)
Being pedantic, USB3 runs at 4Gbps, not 5Gbps. The signal transitions
on the bus are at 5GT/s (5 giga-transitions per second), but due to the
8b/10b encoding, that equates to 4Gbps data rate.
--
Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists