[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <546C2A13.3010307@web.de>
Date: Wed, 19 Nov 2014 06:26:43 +0100
From: Soeren Moch <smoch@....de>
To: Shawn Guo <shawn.guo@...aro.org>, Robin Gong <b38343@...escale.com>
CC: kernel@...gutronix.de, robh+dt@...nel.org, pawel.moll@....com,
mark.rutland@....com, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, linux@....linux.org.uk, sre@...nel.org,
dbaryshkov@...il.com, grant.likely@...aro.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6
chips
On 19.11.2014 04:18, Shawn Guo wrote:
> On Wed, Nov 12, 2014 at 04:20:37PM +0800, Robin Gong wrote:
>> All chips of i.mx6 can be powered off by programming SNVS.
>> For example :
>> On i.mx6q-sabresd board, PMIC_ON_REQ connect with external
>> pmic ON/OFF pin, that will cause the whole PMIC powered off
>> except VSNVS. And system can restart once PMIC_ON_REQ goes
>> high by push POWRER key.
>>
>> Signed-off-by: Robin Gong <b38343@...escale.com>
>> ---
>> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 4 ++++
>> arch/arm/boot/dts/imx6qdl.dtsi | 6 ++++++
>> arch/arm/boot/dts/imx6sl-evk.dts | 4 ++++
>> arch/arm/boot/dts/imx6sl.dtsi | 6 ++++++
>> arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++++
>> arch/arm/boot/dts/imx6sx.dtsi | 6 ++++++
>> 6 files changed, 30 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
>> index 07fb302..ba12cc6 100644
>> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
>> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
>> @@ -531,6 +531,10 @@
>> status = "okay";
>> };
>>
>> +&snvs-poweroff {
>> + status = "okay";
>> +};"
>> +
>> &ssi2 {
>> status = "okay";
>> };
>> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
>> index c701af9..3a032d1 100644
>> --- a/arch/arm/boot/dts/imx6qdl.dtsi
>> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
>> @@ -645,6 +645,12 @@
>> interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
>> <0 20 IRQ_TYPE_LEVEL_HIGH>;
>> };
>> +
>> + snvs-poweroff: snvs-poweroff@38 {
>
> I'm not sure if it's because my DTC version is too low or you didn't
> test, the DTC reports error in label name 'snvs-poweroff'. IIRC, hyphen
> '-' cannot be used in label name, but underscore '_' can.
>
> Shawn
In the patch series "[PATCH v4 0/3] add power off driver for i.mx6" from
Sep 26 (what I have tested) snvs_poweroff was used. This worked as expected.
So this series "[PATCH v4 0/3] add power off driver for i.mx6" (sent on
Nov 12) apparently contains old patches and is not simply resent as
stated in the cover letter.
Soeren
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists